Salman ICS 4.0.3 Custom ROM Firmware (Update Galaxy S2 with S3 Looking rom)

Procedure to Update SAMSUNG Galaxy S2 GT I9100 with SALMAN ROM:

• Download the Salman Custom ROM Firmware Package from here to your computer. Connect your Galaxy S2 with the computer and place this download zip file in your phone. Ensure that you haven’t placed the zip package deep into the folders.

• Once copied, disconnect the device and turn Off so that it can be then entered in the recovery mode.

• Recovery mode in Galaxy S II I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Additionally, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Up next, Select “install zip from sd card” > “choose zip from sd card” and then select the “Salman Custom ROM Firmware Package” which you have placed in your device. Once the process of firmware installation is done, the device will land back on the recovery mode screen.

• As soon as the firmware is completely updated, you need to select the option of “Go Back” and then choose the option of “reboot system now”. Please note once It’s done, it will take around 7 – 10 minutes for the device to show up the Country selector and language selection option. Ensure that at this point of time you are not pressing the power button or removing the battery.If the device takes more than 10 minutes on the S2 boot screen, re insert the battery and boot the device normally.

• Once the device is booted successfully, you can now check the same whether the firmware had been applied successfully or not. You can check the same from the path “Settings > About Phone” where it will be shown that the device has been successfully updated with the Salman custom ROM firmware.

Note: If your Galaxy S2 GT I9100 device doesn’t shown up the country selector or say gets stuck on the Galaxy S2 logo then you need to re follow all the instructions mentioned in this article so as to apply this ICS based 4.0.3 Salman custom ROM firmware.

So there you go, you have now learnt successfully on how to update your S2 GT I9100 with this S3 looking Salman custom ROM firmware. Do let us know if you face any issues in the process of firmware update as we are committed to address the same at the earliest.