Download and install AT & T Samsung Galaxy S3 Gets UCALH9 Based Software Update

 

So if you are an AT & T Galaxy S3 customer then grab the latest firmware on your device now by going through the Settings> About Device > Software Update and then finally tap on Check for Updates.

Read more »

Download and install MIUI Android 4.1.1 Jelly Bean ROM on AT&T Galaxy S3

 

• The process may result in losing all of your data like apps, messages, contacts etc. So first of all take back up of all data to work risk-free.
• Uninstall the antivirus from device (if any).
• Don’t let the power of the device to create any problem for you. So keep your device charged at least 50 percent.
• Install ClockworkMod recovery on your phone.
• Download the zip file of the  ROM here.
• Download GAPPS.zip from here.
• Make sure to save  files on internal SD card of phone.
• Press the VOL DOWN + HOME + POWER buttons to enter into the recovery mode.
• You can scroll through the options by pressing Volume Up and Down button. To make selection of any option, press the Power button.
• Now select the ‘Install Zip From SD Card’ option and choose the .zip file of the ROM from your SD card.
• Select ‘Yes, Install__.zip’  to proceed further with the process.
• The whole process is done. Be patient for the update to get completed. Generally it takes about 2-3 minutes.
• Follow the last three steps to install GAPPS.zip on your AT&T Galaxy S3.
• After the reboot, your AT&T Galaxy S3 will be running on MIUI Android 4.1.1 Jelly Bean ROM.

That’s it. So now start enjoying your AT&T  Galaxy S3 running on MIUI Android 4.1.1 Jelly Bean ROM . The process is very simple and I hope you will follow it properly.

Read more »

Download and install - update AT&T Galaxy S3 SGH I747 with Cyanogen MOD 10 Jellybean 4.1 Firmware

 

How to Update AT&T Galaxy S3 SGH I747 with Cyanogen MOD 10 Jellybean 4.1 Firmware

Procedure to Update Samsung Galaxy I747 with Cyanogen Mod 10 Firmware:

• Download the Cyanogen Mod 10 Jellybean 4.1 firmware Update Package from here along with the Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and move the same to your device. Ensure that you are not placing the zip file deep into the sub folders.

• Once placed, disconnect the phone and turn off the device so that it can be entered in the recovery mode. Recovery mode in Galaxy S III GT I747 can be entered by holding the Volume Up button + the Home key button (the middle button).

• While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on any of the custom ROM firmware.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Cyanogen Mod 10 Jellybean 4.1 firmware Update Package and then followed by the Google Apps Package which you have placed in your device. Once it’s done, the device will take around 4 – 5minutes for applying the update. It will take longer time than expected for starting the device since it’s the first reboot after applying the update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do leave a comment below if you come across with any of the unusual thing about the installed Cyanogen Mod 10 firmware update. Congrats you have successfully upgraded the firmware in your Galaxy S3. You can check the detailed version details from the path “Settings > About Phone”.

Read more »

Download and install - Update AT&T Captivate Glide I927 with ICS 4.0.4 Firmware

 

• From the path “Settings > Applications > Development > KIES Mode”, enable the KIES Mode in your device. Also, ensure that the battery left in the device is at least 40% so as to make sure that the device doesn’t get turned Off in the middle of firmware update.

• Don’t forget to install the drivers from the corresponding links, 32 bit (x86) Windows |   64-bit (x64) Windows. As of now this procedure only supports Windows based systems and doesn’t support Mac based computers.

So once you have followed all the above mentioned instructions, you can now proceed to the next page where we have summed up a detailed tutorial on how to apply this firmware update manually.
Procedure to Update Samsung Galaxy Captivate Glide i927 with ICS 4.0.4 Firmware:

• Download the I927UCLG9_OneClick.exe tool from here to your computer and open the same. Once the tool is downloaded, you now will have to turn off the device so that it can be entered in the download mode.

• The download mode in Galaxy Captivate Glide i927 can be entered by pressing the Volume Up Key + the Power button and then you will see that the device will be booting in the download mode. To get into the download mode, you will now have to press the Volume Up key to confirm the download mode selection.

• Connect your device to the computer with the help of original USB cable and then assuming that you have opened the downloaded executable file, you will see that the ID : COM section in the executable tool will turn yellow which will mean that all the drivers have been installed successfully.

• Now, click on “Start” to start the process of firmware update and then it will take around 4 -5 minutes for applying this update. Once the firmware is applied successfully, the device will then be rebooted.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go you have now successfully applied the update of ICS 4.0.4 firmware update. You can check the same from the path “Settings > About Phone”. Do share with us in the comments section just in case if you face any issues and we will try out level best to sort out the same. Congratulations, you have now successfully applied the update of ICS 4.0.4 firmware in your device.

Read more »