Download-install and Manual Update Samsung Galaxy S Advance I9070 with Kitkat 4.4.2 Android Firmware (Cyanogen Mod 11)

 

 Samsung I9070 Galaxy S Advance could have been called as "advanced", but Samsung does not recognize them as advanced to the Android OS 4.4.2 Kitkat vocation RAM and other hardware invoice concerns. So, for all those users who wanted to install the latest version of Android 4.4.2 firmware Kitkat, can now manually update the same. Unfortunately, Samsung does not come out with the official firmware update but all thanks to the custom ROM firmware makers who have made it possible. After checking out the list of these Quick below conditions before, we will check out how this firmware application.

 Process for Samsung Galaxy S Advance with Android 4.4.2 firmware update Kitkat:

 Cyanogen Mod 11 Download firmware package and Google Apps Package from here to your computer. Once downloaded, you must have the same in your device to place the .

    Turn on the device so that it can be entered into the recovery mode .

    Press and hold Home + Power + Volume Up button to turn the device into recovery mode. If your Galaxy S Advance is in normal mode , then you need to try again , the process of entering the device is in Recovery Mode .

    In recovery mode , select Clear data "and" to delete Wipe cache " the data and wipe the phone available in your cache.

    Once the data is deleted , select "install zip from SD card " and select the firmware ZIP file that you have provided in the device and then followed by the Google Apps package then . It will take about 4 to 5 minutes, until both of the zip files on the device.

    Once done , select "Back" and select the " Restart in normal mode " option for a device restart normally. Please note that it can sometime take longer than 3 -4 minutes to restart the device to normal mode .
Note: If all Galaxy S Advance is in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
While there are many custom ROM firmware for the Galaxy S Advance Android phone is available , we will continue to come up with the custom ROMs that will help you make the most of your device. So there you go , you have now successfully updated your device with the latest version of 4.4.2 KITKAT in your Galaxy S Advance .

Read more »

Download-install and Update Galaxy S Advance I9070 with Kitkat 4.4.2 Android Firmware

 

Samsung I9070 Galaxy S Advance could have been called as "advanced", but Samsung does not recognize them as advanced to the Android OS 4.4.2 Kitkat vocation RAM and other hardware invoice concerns. So, for all those users who wanted to install the latest version of Android 4.4.2 firmware Kitkat, can now manually update the same. Unfortunately, Samsung does not come out with the official firmware update but all thanks to the custom ROM firmware makers who have made it possible. After checking out the list of these Quick below conditions before, we will check out how to install this firmware update.

 

Procedure to Update Samsung Galaxy S Advance with Kitkat 4.4.2 Android Firmware:

• Download Cyanogen Mod 11 Firmware Package and Google Apps Package from here to your computer. Once downloaded, you need to place the same in your device.
•  Turn on the device so that it can be entered into the recovery mode .
  
      Press and hold Home + Power + Volume Up button to turn the device into recovery mode. If your Galaxy S Advance is in normal mode , then you need to try again , the process of entering the device is in Recovery Mode .
  
      In recovery mode , select Clear data "and" to delete Wipe cache " the data and wipe the phone available in your cache.
  
      Once the data is deleted , select "install zip from SD card " and select the firmware ZIP file that you have provided in the device and then followed by the Google Apps package then . It will take about 4 to 5 minutes, until both of the zip files on the device.
  
      Once done , select "Back" and select the " Restart in normal mode " option for a device restart normally. Please note that it can sometime take longer than 3 -4 minutes to restart the device to normal mode .
  Note: If all Galaxy S Advance is in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
  While there are many custom ROM firmware for the Galaxy S Advance Android phone is available , we will continue to come up with the custom ROMs that will help you make the most of your device. So there you go , you have now successfully updated your device with the latest version of 4.4.2 KITKAT in your Galaxy S Advance .

Read more »

Download - Root Galaxy S Advance on XXLQ4 Jellybean 4.1.2 Firmware

 

Procedure to Root Galaxy S Advance I9070 on XXLQ4 Firmware:

• Download Rooting Package for Galaxy S Advance from here to your computer. Once downloaded, connect your phone to computer with the help of original USB cable and then place the Root.Zip file in your device’s external SD Card.

• Now, disconnect the device and then turn Off your phone so that it can be entered in the Recovery mode. Recovery mode in Samsung Galaxy S Advance I9070 can be entered by pressing Volume Up Key + OK button, and holding both simultaneously press the Power Button. In recovery mode, select “clear cache” and “wipe data / factory reset” so that all the data will get cleared from the device.

• In recovery mode select “install from zip card” and select the “root.zip” file for rooting the device. It will take around 3 -4 minutes for rooting the device. Once the device is rooted, the phone will be rebooted.

• Now, once the device gets rebooted you need to download the “Root Checker” app from the Google PLAY Store and then check on whether the device is rooted or not. Just in case if the device is not rooted you will have to try the process again.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.

So, there you go, you have successfully rooted your device on the XXLQ4 Jellybean firmware of 4.1.2 version. Do let us know in the comments section just in case if you come across any issues as we will try our level best to sort out the same.

Read more »

Download and install Update Galaxy S Advance I9070 with Official Jellybean 4.1.2 XXLQ4 Firmware

 

Procedure to Update Galaxy S Advance with Jellybean 4.1.2 XXLQ4 Firmware Update:

• Download the Jellybean 4.1.2 XXLQ4 Firmware Package and Odin from here to your computer and then extract the same preferably to a folder on desktop. Now, open odin in your computer and then turn off your phone so that it can be entered in the Download Mode.

• Turn Off your device so that it can be entered in the Download Mode.

• Download mode in Samsung Galaxy S Advance I9070 can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. In recovery mode, select “clear cache” and “wipe data / factory reset” so that all the data will get cleared from the device.

• Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn yellow indicating that all the drivers have been installed.

• Click on “PDA” to select the tar file which you got upon extraction of firmware package. Now, click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, the device will be rebooted. Please note that whole process of firmware update will take around 4 -5 minutes for applying this update. Don’t pull Off the battery in the process of firmware update.

• To check on whether the firmware is updated or not, you will need to go to the path “Settings > About Phone” where the current firmware version will be mentioned as Jellybean XXLQ4 4.1.2 firmware.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.

Do let us know in the comments section just in case if you come across any issues as we will try our level best to sort out the same. So, there you go you have now successfully updated your Samsung Galaxy S Advance I9070 smartphone with the latest Jellybean 4.1.2 firmware.

Read more »

Galaxy S Advance I9070 with Jellybean 4.1.1 Firmware

 

Procedure to Update Galaxy S Advance I9070 with Jellybean 4.1 Styled Firmware:

• Download the Jellybean Styled Firmware for Galaxy S Advance I9070 smartphone from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB Cable and then place the zip file in the device.

• Once placed, disconnect the device and download the ROM Manager app from the Google PLAY Store so that you can then enter the device in the recovery mode. Alternatively, you can also enter your phone in the recovery mode with the help of below mentioned manual step.

• Recovery mode in Galaxy S Advance I9070 can be entered manually by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.

Note: If the device gets stuck in the Samsung logo or gets into the boot loop mode then you need to long press the power button and turn off the device. Repeat the process from the start by following the instructions.

So there you go, you have now successfully updated your Galaxy S Advance I9070 device with the latest version of Jellybean 4.1.1 Styled firmware. Do let us know just in case if you face any issues while you perform the update in the comments section below as we will try our level best to sort out the same.

Read more »

Download and install Update Galaxy S Advance I9070 with Official Jellybean 4.1.2 XXLPY Firmware

 

Procedure to Update Galaxy S Advance I9070 with Jellybean 4.1.2 Firmware:

• Download Jellybean 4.1.2 Firmware Package and Odin from here to your computer. Once downloaded, connect your device to the computer and extract both the zip files downloaded in your computer.

• Open Odin in your computer and you will see that the ID: COM section will turn Yellow indicating that all the drivers are installed successfully.

• Now, click on “PDA” to select the tar file which you have got after extraction and click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, you will see that the device will be rebooted automatically. The whole process of firmware update will take around 4 -5 minutes.

• Once you see the Welcome screen in your Galaxy S Advance I9070, you will now need to disconnect the device from the computer and use it the way you want to. To check whether the firmware has been updated or not, you need to check the same from the path “Settings > About Phone” where the firmware version will be mentioned as XXLPY Jellybean 4.1.2 version.

Note: If the device gets stuck in the Samsung logo or gets into the boot loop mode then you need to long press the power button and turn off the device. Repeat the process from the start by following the instructions.

So there you go, you have now successfully updated your Galaxy S Advance I9070 device with the latest version of Jellybean 4.1.2 firmware. Do let us know just in case if you face any issues while you perform the update in the comments section below as we will try our level best to sort out the same.

Read more »

Download and install Update Galaxy S Advance I9070 with Jellybean 4.1.1 Firmware

 

Procedure to Update Galaxy S Advance I9070 with Jellybean 4.1 Styled Firmware:

• Download the Jellybean Styled Firmware for Galaxy S Advance I9070 smartphone from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB Cable and then place the zip file in the device.

• Once placed, disconnect the device and download the ROM Manager app from the Google PLAY Store so that you can then enter the device in the recovery mode. Alternatively, you can also enter your phone in the recovery mode with the help of below mentioned manual step.

• Recovery mode in Galaxy S Advance I9070 can be entered manually by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.

Note: If the device gets stuck in the Samsung logo or gets into the boot loop mode then you need to long press the power button and turn off the device. Repeat the process from the start by following the instructions.

Read more »