1:17 PM
samsungapps
How to Update Vibrant T959 with Jellybean 4.1 based Cyanogen Mod 10 Firmware
Procedure to Update Samsung Vibrant T959 with Cyanogen Mod 10:
- Before proceeding you need to ensure that the device is rooted and installed with the custom recovery image. First up download the Cyanogen Mod 10 Update package & Kernel from here to your computer. Once downloaded, you now need to connect your phone with the computer using the original USB cable and place the file in your phone.
- Once the file is placed, disconnect the device and turn off the device so that it can be entered in the recovery mode.
- Select “install zip from sd card” > “choose zip from sd card” and then choose the Cyanogen mod 10 package & then the Kernel file which you downloaded and placed in your phone from the link mentioned in the initial step.
- Once the process is done, select “++++ Go Back ++++” and choose “reboot system now” to reboot the system. It will take more than 10 minutes for applying this update. Please don’t interrupt the process of applying the update or else it may even brick the device.
- To check whether the firmware has been successfully updated or not, you need to go to the path Settings > About Phone > Firmware Version where it will show Jellybean Android 4.1 Firmware. Just in case if it shows any other firmware version then you again need to follow the instructions.
Note: Just in case if the device booted up or gets
into the boot loop mode then you need to re follow the above mentioned
steps with the help of above mentioned instructions. Don’t forget to
restore the backup which you have taken in the initial steps.
Do let us know in the comments section just in case if you face any
issues in the process of applying this Jellybean 4.1 based Cyanogen Mod
update in your Samsung Vibrant T959 phone. Congratulations, you have now
successfully applied the update of Cyanogen mod based Jellybean 4.1
Android update in your device.
0 yorum:
Post a Comment