Download-install and Update Galaxy S2 GT I9100 with Official Jellybean 4.1.2 Firmware

 

Good news for Galaxy S2 users is that you can now update your Android experience with an all new Android OS 4.1.2 Jellybean. Dubbed as XXMS7 users can apply this firmware update, make sure that there are no errors regarding battery consumption along with some optimizations for the RAM requirements. So after checking out what is in front of the list of these quick conditions below, we will check out how to update your device with the latest version of the official firmware.

  Why you should apply this XXMS7 Android firmware in your Galaxy S2?

      Better RAM usage,
      Were updated on apps
      Minor tweaks battery,
      Bug fixes

 Method for Manual Update Galaxy S2 GT I9100 Android Phone with Android Jellybean XXMS7 4.1.2 Firmware:

    Download Jellybean Android 4.1.2 firmware package and Odin from here to your computer. Once downloaded, open Odin in your computer and turn your device so that it can be entered into the download mode .

    Press and hold Home + Power + Volume Down buttons to move the device into download mode. If your Galaxy S2 comes in the normal mode , then you need to try again , the process of entering the device in the download mode .

    Click Select on the " AP" in the Odin to the tar file , the "Start " button after extracting the firmware package was Odin.

    Once you click "Start " , you will now need to look for the whole process of the firmware is ready to wait. The whole process of firmware update will take about 3 -4 minutes and once done , the phone will automatically restart .
Note: If all Galaxy S2 smartphone in the boot loop mode , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
Please let us know if you make in the process of firmware update in the comments section just in case any questions.

Read more »

Download-install and Update Galaxy S2 GT I9100 with Kitkat 4.4.2 Android Firmware

 

Samsung Galaxy S2 Android smartphone can now use the latest version of Kitkat 4.4.2 and all thanks to the custom ROM firmware, which is called as updated project AOSB. While it was too bad that Samsung is not pushing the updates from Kitkat 4.4.2 unknown reasons, we will help you update the firmware, which brings in the experience of 4.4.2. While normal Android OS 4.4.2 does not come with many features that this new firmware comes with a huge laundry list of things that deserve your mobile phone.

 

Features:

OTA Support
MultiWindow
HALO
HALO MODS
HALO: make windows move able and scale able
Custom Navigation Ring
Custom Navigation Bar
Custom CRT Animation
Mobile Network Battery Saver Mode
Configurable up to user (LTE or 4G)
Advanced Battery Bar
Support Facebook Sync
App sidebar
Navigation bar with custom dimensions
Screen video recording
Configurable init.d
Build PropModder
Incoming calls dialog
RAM bar with custom colors

Method for Galaxy S2 GT I9100 with Android OS 4.4.2 update Kitkat:

• Download KitKat 4.4.2 Android firmware package from here to your computer along with the Google Apps Package.
•  Once downloaded , connect your phone to your computer . Put the downloaded zip 2 files in your device off and disconnect the device from the computer .
• Turn on the device so that it can be entered into the recovery mode. Galaxy S2 , by holding the Volume Up button + Home key button ( the middle button) to be entered into the recovery mode . Hold these two buttons , you must turn on your device.
• Alternatively, you can also use the recovery mode using the " ROM Manager " app . In recovery mode , select appropriate options to disable , and then wipe the existing data in your phone .
•  In recovery mode , select " install zip from SD card " , and then select the zip file of the firmware zip package that you have placed on your phone. Now, after the firmware is updated, select "Back" and select " reboot system now "
•  .Please note that it may take 3 to 4 minutes for the update. Once the update applied and if you see your device on the home screen , you can disconnect the device from the computer.
• Order on whether the firmware is successful or not , head over to the path " Settings> Phone " where the firmware version is like KitKat mentioned 4.4.2 firmware check applied .
• 
  Note: If all Galaxy S2 smartphone in the boot loop mode , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
  Please let us know if you make in the process of firmware update in the comments section just in case any questions. You have now successfully in your Samsung Galaxy S2 Android Smartphone updated to the latest version of Android 4.4.2 firmware KitKat .

Read more »

Download and install Manual Update Galaxy S2 GT I9100 with Kitkat 4.4.2 Android OS

 

Procedure to Update Galaxy S2 GT I9100 with Kitkat 4.4.2 Android OS:

• Download KitKat 4.4.2 Android Firmware package and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the two zip files in your device.
• Press and hold Home + Power + Volume Up buttons to enter the device in the Recovery Mode. If your Galaxy S2 I9100 enters in the Normal mode, then you need to re try the process of entering the device in the Recovery Mode. You can also enter the device in the recovery mode with the help of ROM Manager app.

• In recovery mode, you need to clear and wipe the data present in your phone by selecting the options like “Clear Data” and “Wipe Cache” options.

• Select “install zip from sd card” and then select the firmware zip file which you have placed in the device. It will take around 4 -5 minutes to apply both the zip files in your device.

• Once done, select “go back” and choose the option of “reboot in normal mode” for rebooting the device normally. Please note that it may sometime take more than 4 -5 minutes for rebooting the device in the normal mode.

• To check on whether the firmware is update or not, you need to head over to the path “Settings > About Phone” where the current firmware will be mentioned as Kitkat 4.4.2 firmware.

Note: If at all your Galaxy S2 I9100 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
Do let us know in the comments section just in case if you face any issues in the process of firmware update. You have now successfully updated the latest version of Jellybean 4.3 Android firmware in your Samsung Galaxy S2 I9100 Android smartphone.

Read more »

Download and install Update Galaxy S2 GT I9100G with Jellybean 4.1.2 XWLSR Firmware

 

Tutorial to Update Galaxy S2 GT I9100 with Jellybean 4.1.2 XWLSR Firmware:

• Download Jellybean 4.1.2 XWLSR Firmware and Odin from here to your computer. Once downloaded, extract both the files preferably to the desktop to a folder. Now, open Odin in your computer.

• Turn Off your Galaxy S2 GT I9100G smartphone so that it can be entered in the Download Mode. Download mode in Galaxy S II GT I9100G can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.

• Open Odin in your computer and connect your Galaxy S2 I9100G smartphone with the computer using the original USB cable. In Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.

• In Odin, click on “PDA” and select the .tar file which you get after the extraction of the firmware zip file. Ignore the .dll file.

• Now, once you have selected the tar file in the PDA Section, click on “Start” to start the process of firmware update process.

• Once the firmware is updated, your Galaxy S2 GT I9100G smartphone will be restarting automatically. Now, all you need to do is to just ensure that you are not disconnecting the device till you see the country selector / home screen in your device.

• To check whether the firmware has been updated to the latest version or not, head over to the path “Settings > About Phone” where you will get to see the firmware version as “Jellybean 4.1.2” firmware version.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

So there you go, you have now successfully learnt on how to update your device with the latest version of Jellybean 4.1.2 firmware. Do let us know in the comments section just in case if you face any issues.

Read more »

Download and install Update Galaxy S2 GT I9100 with Official Jellybean 4.1.2 XWLSD Firmware

 

Tutorial to Update Galaxy S2 GT I9100 with Jellybean 4.1.2 XWLSD Firmware:

• Download the Jellybean 4.1.2 XWLSD Firmware package and Odin from here to your computer. Once downloaded, extract both of the zip files to the desktop preferably.

• Now, all you need to do is to just turn off your Galaxy SII so that it can be entered in the Download mode. Download mode in Galaxy S II GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.

• Open Odin in your computer and connect your Galaxy S2 smartphone with the computer using the original USB cable. In Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.

• In Odin, click on “PDA” and select the .tar file which you get after the extraction of the firmware zip file. Ignore the .dll file.

• Once selected, click on “Start” for starting the process of firmware update. As soon as the firmware update process is completed, you will see that the device will be rebooted automatically.

• Till you see the Language selection / Country Selector option, don’t disconnect the device from computer. It may take longer time than expected for the device to reboot as it’s the first reboot after the upgrade.

• To check whether the firmware has been updated to the latest version or not, head over to the path “Settings > About Phone” where you will get to see the firmware version as “Jellybean 4.1.2” firmware version.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

So, there you go, you have now successfully learnt on how to apply the latest XWLSD Jellybean 4.1.2 Firmware in your device. Do keep us posted in the comments section just in case if you face any issues as we will try to address the same as soon as possible.

Read more »

Root Galaxy S2 I9100 on XWLS8 Jellybean 4.1.2 Firmware

 

Procedure to Root Galaxy S II GT I9100 on Jellybean XWLS8 4.1.2 Firmware:

• Download XWLS8 Jellybean 4.1.2 Rooting Kernel and odin from here to your computer. Once downloaded, extract both of the packages to the desktop.

• Turn Off your Galaxy S2 I9100 so that your device can be entered in the Download Mode. Download mode in Galaxy S2 GT I9100 can be entered in recovery mode by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• Once the device is entered in the Download Mode, Open Odin in your computer and connect your device to the computer with the help of original USB cable and then you will see that the ID: COM section will turn Yellow indicating that all the drivers have been installed successfully.

• Now, click on “PDA” and then you will have to select “”. Once selected, click on “Start” to start the process of Rooting.

• Once the device is rooted, the device will be rooted. It will take around 1 -3 minutes for rooting the device. Once the device is rooted, phone will be rebooted.

Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.

• Download the Root Checker app from the Google PLAY Store to check whether your device is rooted or not.  Also, if it’s rooted, you then will have to download and install the ROM Manager app from the Google PLAY Store.

So, there you go, you have successfully rooted your device on the XWLS8 Firmware which is on the Jellybean 4.1.2 firmware. Do let us know in the comments section just in case if you face any issues in the comments section.

Read more »

Download and install Update Galaxy S2 GT I9100 with Android 4.1.2 Jelly Bean Firmware

 

[OFFICIAL]Samsung rolls out Android 4.1.2 Jelly Bean update for the Galaxy S II GT-I9100

Samsung has just started to push Android 4.1.2 Jelly Bean update to the International Samsung Galaxy S II GT-I9100. The Galaxy S II is the best-selling Android device of 2011 and has a very large user base that’s why Samsung keeps on updating this device with all the new Android versions as they want to provide the Galaxy S II users with their best support experience.

You might not be able to update your device to Android 4.1.2 Jelly Bean right away as the update is rolling out in phases. So, it might not yet be available for your country or network provider (If Your device is Carrier branded) but don’t worry the update will arrive soon.

In the history of software updates, the new Jelly Bean update by Samsung to the Galaxy S II is by far the most major update given to a smartphone yet. As we all know Samsung’s ICS update didn’t had any UI changes and had exactly the same UI which was in its Gingerbread but this is not the case with Samsung’s Android 4.1.2 Jelly Bean update. The new jelly bean update breathes a new life into the Galaxy S II, Samsung has completely ditched the old UI and has given the new Nature UX Interface, which is the same as the one being used in the Galaxy S III Mini and the Galaxy S III, in its latest Jelly Bean update.

Some of the Enhancements in the new Jelly Bean Update:
- Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
- Full User Interface Revamp (Same UI as of the Galaxy S III and Galaxy Note II)
- TouchWiz Nature UX
- Samsung’s S Cloud services
- Improved Camera features
- New Lockscreen With Many Customization Options
- New Features like Direct Call, Smart Stay and Pop-up Play
- New Widgets (From Galaxy S III)
- 2 Home screen modes
- New Notification bar With More Notification Toggles
- Google Now

Keep an eye on @SamKiesUpdates to get the latest information on Official Firmware updates for your Samsung device.
You can update your Galaxy S II through Samsung KIES or by using OTA.

Hot links:
Check the 10 latest official firmwares for the Galaxy S II here!
You can find our live firmware feed here!

Official Firmware Details:
Android Version: 4.1.2 – Build JZO54K
PDA: I9100XWLS8
CSC: I9100FOPLS3
MODEM: I9100XXLS8
Changelist: 816988
Build Date: 14 January 2013

Live Feed of Official Android 4.1.2 Jelly Bean update availability for the Galaxy S II GT-I9100
XXLS / XWLS / ZSLS / DDLS / JVLS / JPLS
Download

Read more »

Download and install Update Galaxy S2 GT I9100G with Jellybean 4.1.2 Firmware

 

Procedure to Update Galaxy S2 GT I9100G with Avatar ROM Jellybean 4.1.2 firmware:

• Download the Avatar ROM Jellybean 4.1.2 firmware Package & Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place this zip file in your device.

• Now, disconnect the device from computer and turn Off the device so that it can be entered in the recovery mode. The recovery mode can be entered either with the help of “ROM Manager” app or manually with the help of below mentioned step.

• Recovery mode in your Galaxy Device can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. Now, select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device.

• Now, once the firmware is updated, select “go back” and select “reboot system now”. To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Read more »

Download and install Update Galaxy S2 GT I9100 with Jellybean 4.1.2 Firmware

 

Procedure to Update Galaxy S2 GTI9100 with Jellybean 4.1.2 Firmware:

• Download the latest Jellybean 4.1.2 Firmware Package from here to your computer. Once downloaded, connect your device to the computer and place the zip file in the internal memory of your S2.

• Disconnect the device so that your phone can be entered in the recovery mode. The recovery mode in Galaxy S2 can be entered either by ROM Manager or with the help of below mentioned manual method which we have mentioned below.

• Recovery mode in Galaxy S2 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. Now, select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device.

• It will take around 3 -5 minutes for applying the update and as soon as it’s updated successfully, you will need to then make sure to follow all the on screen instructions. Once you see the message as “install from sd card completed”, select “go back” and select “reboot system now” for rebooting the device in the normal mode.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Once updated, you can now restore all the data which you have created a backup of all the data. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Read more »

Download and install Update Galaxy S2 GT I9100 with Jellybean 4.2.1 Firmware Update – Super Stable Resurrection Remix

 

Procedure to Update Galaxy S II GT I9100 phone with Resurrection Remix Firmware:

• Download Jellybean 4.2.1 Resurrection Remix Custom ROM Firmware package & Add-On Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB Cable and place this zip file in your device along with the Add-On Package.

• After placing the files in your device, download the “ROM Manager” app from the Google PLAY Store. Now, all you need to do is to disconnect the device from computer and enter your Galaxy S2 in the recovery mode. You can either enter the device in the recovery mode with the help of ROM manager app or manually with the help of below mentioned step.

• Turn Off your phone so that it can be entered in the download mode. Recovery mode in Galaxy S2 GT I9100 can be entered by pressing Volume Up Key, Center button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the recovery mode.

• In recovery mode, select “install zip from sd card” and choose the Resurrection Remix Custom ROM firmware and then the Add-On Package. Once the firmware is selected, it will take around 4 -5 minutes for applying the update. Once the firmware is updated successfully, you will see the message as “install from sd card completed” and then all you need to do is to just select “go back” and select “reboot system now” for rebooting the device in the normal mode.

• To check whether the firmware is updated or not, check from the path “Settings > About Phone” where the current firmware version will be mentioned as Jellybean 4.2.1 Resurrection Remix firmware. Very soon we will be coming up with an article which will help you to upgrade with the latest Jellybean 4.2.1 firmware version for Galaxy S II.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.

Do let us know in the comments section just in case if you face any issues in the process of firmware update as we will try our level best to sort out the same at the earliest. So, there you go, you have successfully updated your device with the latest firmware.

Read more »

Download and install - Root Galaxy S2 GTI9100 on XXLSJ Jellybean 4.1.2 Firmware

 

Procedure to Root Galaxy S2 on XXLSJ Jellybean 4.1.2 Firmware:

• Download Odin and XXLSJ Firmware Package from here to your computer. Once downloaded, extract the firmware package and open the Odin in your computer.

• Turn Off your Galaxy S2 so that it can be entered in the download mode. The download mode in Galaxy S2 GT I9100 can be entered in recovery mode by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• Connect your Galaxy S2 with your computer / Laptop and then in Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,

Install the USB Drivers in your computer &

Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Now, click on “PDA” to select the tar file which you got after extraction. Once selected, click on “Start” the process of Rooting. Once the rooting process is done, the phone will be rebooted. Please note that it might take few moments of time for rebooting the device and may take longer time than expected to show up the home screen.

Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.

• Download the Root Checker app from the Google PLAY Store to check whether your device is rooted or not.  Also, if it’s rooted, you then will have to download and install the ROM Manager app from the Google PLAY Store.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully rooted your device with the latest

Read more »

Download and install - Update Galaxy S2 I9100G with Jellybean 4.2 Cyanogen Mod Firmware

 

Procedure to Update Galaxy S GT I9000 with Jellybean 4.2 Firmware:

• Download the Jellybean 4.2 Firmware Package and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and then place these two zip files in your device.

• Once you have placed these two files, disconnect the device from computer to download the “ROM Manager” app from PLAY Store. Open the app and grant the Superuser access by tapping on the “Grant” option.

• Now, from the ROM Manager app, select “Enter into Recovery Mode” for booting the device in the recovery mode or else you can also manually enter the device in the recovery mode by first turning Off the device. Recovery mode in Galaxy S GT I9000G can be entered manually by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.

• Now, select “install zip from sd card” to choose the placed Cyanogen Mod 10 Jellybean 4.2 Zip Package and Google Apps Package. It will take around 3 – 5 minutes for applying the update. Please note that sometimes it may take more than expected time for updating the same.

• Now, once the firmware is updated, select “go back” and select “reboot system now”. To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Read more »

Download and install - Update with Jellybean 4.1 Simplistic Custom ROM Firmware for Galaxy S2

 

Procedure to Update Galaxy S2 GT I9100 with Simplistic Custom ROM Firmware:

• Download the Simplistic Custom ROM Firmware Package (mirror) from here to your computer. Once downloaded connect your device to the computer with the help of original USB cable and place the zip file in internal memory of your Galaxy S2.

• Disconnect the device and download the ROM Manager app from the Google PLAY Store to open and select “reboot into recovery mode” for rebooting the device in the recovery mode automatically. You can also enter the device into the recovery mode with the help of below mentioned step manually.

• Recovery mode in Galaxy S2 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. Now, select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device. As soon as the firmware is applied successfully, you will get to see the message as “install from sd card completed”, now select “go back” and choose the option of “reboot system now” for rebooting the device in the normal mode.

• To check on whether the update has been successfully applied or not, you need to check the same from the path “Settings > About Phone” where you will find the current firmware version as Simplistic Custom ROM firmware.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the latest firmware update of Simplistic Custom ROM Firmware in your Galaxy S2 smartphone.

Read more »

Download and install - Update Galaxy S2 GT I9100 – Steps to Update with Jellybean 4.2 Custom ROM Firmware

 

Procedure to Update Jellybam 4.2 Update in GALAXY S2 GT I9100:

• Download the Jellybam 4.2 Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.

• Once you have placed the file, disconnect the device and turn off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode alternatively via the ROM Manager app which can be downloaded from the Google PLAY Store.

• Now, in the recovery mode, select “install zip from SD Card” to select the zip file of Jellybam which you have placed in your device’s SD Card. Once the file is selected, you now need to wait for the zip file to get processed in the device. As soon as you see the message of “installing from sd card completed” at the bottom of the screen, you now need select “go back” and then select “reboot system now” for rebooting the device in the normal mode. Device will take longer time than expected for rebooting the device.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. To check on whether the update has been successfully applied or not, you need to check the same from the path “Settings > About Phone” where you will find the current firmware version as Jellybean 4.1.2 firmware.

Read more »

Download and install - Update Galaxy S2 GT I9100 Thebyani Jellybean 4.1.1 Firmware

 

 

 

 

Procedure to Update Galaxy S2 GT I9100 with Thebyani custom ROM Firmware:

• Download the Thebyani custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the same in your device.

• Ensure that you are not placing the file deep into the device. Once the file is placed, disconnect the phone from computer and turn off the device from computer so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app which can be downloaded from the Google PLAY Store.

• Now, select “Go Back” and select “install zip from sd card” > “choose zip from internal sd card” and then choose the Thebyani custom ROM Firmware Package which you have placed in your phone.

• Once you select the firmware update zip package, you will have to wait for the same to finish the update process. As soon as the update is applied, select “Go Back” and select the “reboot system now” for rebooting the Galaxy S2.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go you have now successfully applied the update of Thebyani custom ROM firmware based on Jellybean 4.1.1 firmware update.

Read more »

Download and install - Update Galaxy S2 GT I9100 with RootBox Jellybean 4.1.2 Firmware

 

How to Update Galaxy S2 GT I9100 with RootBox Jellybean 4.1.2 Firmware

Procedure to Update Galaxy S2 GT I9100 with Root Box Jellybean 4.1.2 Firmware:

• Download the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the 2 downloaded zip files in your device.

• Disconnect the device from computer and turn off your Galaxy S2 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy S2 GT I9100 with the latest Jellybean 4.1.2 Firmware.

Read more »

Download and install - Update Galaxy S2 & Galaxy S3 with AOKP 3.0 Firmware Version

 

Procedure to Update AOKP 3 Firmware Update in Galaxy S2 and in Galaxy S3 Device:

• Download the below mentioned corresponding firmware from here to your computer and Google Apps package. Once downloaded, you will have to connect the phone to the computer and place these two files in your device. Kindly select the appropriate file for your Galaxy Smartphone or else it may even brick the phone.

AOKP 3 for Galaxy S2,

AOKP 3 for Galaxy S3

• Once you have placed the file in your phone, turn off the device so that it can be entered in the recovery mode.

• Recovery mode in your Galaxy S2 or S3 device can be entered by holding the Volume Up button + the Home key button (the middle button). In recovery mode, select Clear cache and wipe all the data present in your phone so as to make sure that there are no force close errors after applying this update.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the placed AOKP Firmware Package. Once the file selection is over, the firmware will be applied within 10 minutes, you can see the progress of firmware update with the help of a progress bar. As soon as you see the home screen, select “Go Back” to select the option of “reboot system now” for rebooting the device in the normal mode.

Note: Just in a rare case if your Samsung Galaxy S III refuses to turn ON or say if it gets stuck on the Samsung Galaxy Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go, you have now successfully updated your device with this AOKP 3 firmware. Do share with us in the comments section just in case if you face any issues as we will try to address the same.

Read more »

Download and install - Update Galaxy S2 GT I9100 with Official ICS XWLPX 4.0.4 Firmware

 

How to Update Galaxy S2 GT I9100 with Official ICS XWLPX 4.0.4 Firmware

Procedure to Update Galaxy S2 with ICS XWLPX Firmware:

• Download XWLPX Firmware Package and Odin from here to your computer. Once downloaded, extract both the zip files preferably to the desktop. Now, turn off the computer so that it can be then entered in the download mode.

• Download mode in Galaxy S II GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.

• Open Odin in your computer. Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM Section will turn Yellow.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,

• Install the USB Drivers in your computer &
• Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Click on “PDA” and select the tar file which you got after extracting the firmware update package. After selecting the PDA file, click on “Start” to start the process of firmware update. As soon as the device is updated successfully, the device will be restarted. As soon as you see the home screen or language preference setting options, you can then disconnect the device and turn Off the device in the recovery mode.

• Recovery mode in Samsung Galaxy S II I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” for clearing out all the cache data present in your device. Once it’s done, select “reboot system now”. As soon as the device is rebooted, you can check the same whether the firmware update has been applied or not from the path “Settings > About phone > Firmware version” where it will be mentioned as XWLPX.

Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.

Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Read more »

Download and install - Update Samsung Galaxy S2 GT I9100 with Official ICS 4.0.4 XWLPO Firmware

 

How to Update Samsung Galaxy S2 GT I9100 with Official ICS 4.0.4 XWLPO Firmware

Procedure to Update Galaxy SII GTI9100 with Official ICS 4.0.4 XWLPO:

• Download ICS 4.0.4 XWLPO Firmware package & Odin from here to your computer. Once downloaded, extract the same to get the tar file and Odin executable file. Now, open Odin in your computer and turn off your phone so that it can be entered in the download mode.

• Download mode in Galaxy S II GT I9100 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.

• Connect your Galaxy S2 with your computer / Laptop and then in Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,

• Install the USB Drivers in your computer &
• Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Once the ID: COM section is turned Yellow then click on “Start” for applying the firmware update. It will take around 4 -5 minutes for applying the update. Once the device is updated, the device will be rebooted and then you need to disconnect the device.
• Now, turn Off the device so that it can be entered in the recovery mode. Recovery mode in Samsung Galaxy S II I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
• As soon as the device is rebooted, you can check the same whether the firmware update has been applied or not from the path “Settings > About phone > Firmware version” where it will be mentioned as XWLPO.

Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.

So there you go you have now successfully updated the device with the latest firmware XWLPO in your Galaxy S2 GT I9100. Do share with us in the comments section just in case if you face any issues in the comments section below.

Read more »

Download and install - Update Galaxy S2 GT I9100 with ICS Omega 15 Custom ROM Firmware

 

Procedure to Update Galaxy S2 GT I9100 with Omega 15 Custom ROM Firmware:

• Download the Omega 15 Custom ROM firmware package from here to your computer. Once downloaded, connect your phone to the compute with the help of original USB cable and place the zip file in your phone.

• Now, disconnect the device and turn off the same so that it can be entered in the recovery mode. You can enter the device in the recovery mode via the ROM Manager app or manually. To enter recovery mode manually, press Volume Up Key + Menu button and then press the Power button to enter the device in the recovery mode. If the device boots up in the normal mode, then again follow the above steps so as to boot the device in the recovery mode.

• Now, in recovery mode select “Wipe Cache” and “Wipe data/factory reset” so as to make sure that all the data is wiped off successfully or else you may get errors like Force Close. Now, select “install zip from internal sd card” to get an array of files which are there in your device. Select the Omega 15 Firmware Zip file which you have placed in your phone with the help of Volume keys and power button.

• Now, wait for the firmware update to get applied successfully and once its done the phone will land up in the recovery mode screen where all you need to do is to just select the option of “reboot system now” for rebooting the device normally.

• Please note that it may take longer time than expected for rebooting the device. If the device gets stuck in the S Logo for longer period of time then you need to re insert the battery and re follow all the above mentioned instructions.

So there you go, you have now successfully installed the latest firmware update of Omega 15 Custom ROM firmware in your device. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Read more »