Download-install and Manual Update Samsung Galaxy Note 10.1 N8000 with Official Kitkat 4.4.2 XXUDNE4

 

 How to update 10.1 N8000 Galaxy Note with Android OS 4.4.2 Kitkat:

Download Android 4.4.2 0S Kitkat Package from here to your computer along with the Odin file. Once downloaded, extract Odin in your computer and turn off the N8000 Galaxy Note 10.1.

    Enter your N8000 Galaxy Note 10.1 in download mode. By holding the Volume Down key + Home key button (the middle button). Hold these two buttons, you must turn on your device.

    If Galaxy Note 10.1 is in the normal mode, then you must use the command to retry the device into download mode.

    Connect your tablet to your computer using the original USB cable. Assuming that Odin opened in your computer and ID: COM section is yellow / blue, click on "PDA" / tab "AP" in the Odin to the rooting file you after extracting the firmware package received, select click on "Start" in Odin.

    Once you click "Start", you will now need to look for the whole process of the firmware is ready to wait. The whole process of firmware update will take about 3 -4 minutes and once done, the phone will automatically restart.

    Once the device updates, you can now see that the device will reboot and it will take about 3 -5 minutes for setting up the machine.
Go to the path "Settings> About tablet" where you can check the firmware version 4.4.2 as Kitkat Android OS version XXUDNE4.
Note: If at all Samsung Galaxy Note 10.1 is in the boot loop sequence, then you must turn off the power, then at the update from the beginning. To turn the battery use or say you can long press the power button.
So there you go, you have now successfully using the latest version of Android OS 4.4.2 Kitkat updated your tablet. Please let us know if you make in the process of firmware update in the comments section just in case any questions.

Read more »

Download-install and Manual Update Galaxy Note 10.1 N8000 with Official Kitkat 4.4.2 XXUDNE4 Firmware

 

Samsung Galaxy Note N8000 10.1 Android tablet can now be officially updated with the latest version of Android OS 4.4.2 Kitkat. The best part is that the new Android OS 4.4.2 Kitkat uses less memory and is faster than any other operating system of Android. So let us know how you need the same hand without you to get to the root device. Since this is the official firmware update, this update does not wipe the device or void your warranty in any way. This firmware is dubbed as XXUDNE4. After checking out what is in front of the list of specified conditions Quick below, we are writing to detailed instructions to help you apply this update.

 How to Update Galaxy Note 10.1 N8000 with Kitkat 4.4.2 Android OS ?

Download Android 4.4.2 0S Kitkat Package from here to your computer along with the Odin file. Once downloaded, extract Odin in your computer and turn off the N8000 Galaxy Note 10.1 .

    Enter your N8000 Galaxy Note 10.1 in download mode . By holding the Volume Down key + Home key button ( the middle button) . Hold these two buttons , you must turn on your device.

    If Galaxy Note 10.1 is in the normal mode , then you must use the command to retry the device into download mode .

    Connect your tablet to your computer using the original USB cable. Assuming that Odin opened in your computer and ID: COM section is yellow / blue , click on "PDA" / tab "AP" in the Odin to the rooting file you after extracting the firmware package received , select click on "Start" in Odin.

    Once you click "Start " , you will now need to look for the whole process of the firmware is ready to wait. The whole process of firmware update will take about 3 -4 minutes and once done , the phone will automatically restart .

    Once the device updates , you can now see that the device will reboot and it will take about 3 -5 minutes for setting up the machine .
Go to the path " Settings> About tablet " where you can check the firmware version 4.4.2 as Kitkat Android OS version XXUDNE4 .
Note: If at all Samsung Galaxy Note 10.1 is in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
So there you go , you have now successfully using the latest version of Android OS 4.4.2 Kitkat updated your tablet . Please let us know if you make in the process of firmware update in the comments section just in case any questions.

Read more »

Download-install and Manual Update Galaxy S4 Active with Official Kitkat 4.4.2 Android Firmware

 

Not only in the name, is also Samsung Galaxy S4 Active Android smart phone Samsung ACTIVE and finally shoots the official Android OS 4.4.2 Kitkat. So finally go for all those who hate to wait and manually apply the latest firmware update on your device. After checking out, what are the essential list of instructions that you need to get ready to follow the device for the application of the firmware, we will head up to the detailed instructions that will help you get the device with this Kitkat Android OS 4.4. 2 update. Just for your information, this Kitkat 4.4.2 Android OS is dubbed as XXUCNE4 and S4 Active variant can only be applied to the I9295 Galaxy.

How to Update Galaxy S4 Active with Android OS 4.4.2 Kitkat:

 Download Kitkat 4.4.2 firmware package and Odin from here to your computer. Once downloaded, now you need to extract both the zip files to a folder on your desktop for easy discovery.

    Enter your Galaxy S4 active in download mode . By holding the Volume Down key + Home key button ( the middle button) . Hold these two buttons , you must turn on your device.

    If Galaxy S4 Active comes in the normal mode , then you must use the command to retry the device into download mode .

    Connect your tablet to your computer using the original USB cable. Assuming that Odin opened in your computer and ID: COM section is yellow / blue , click on "PDA" / tab "AP" in the Odin to the rooting file you after extracting the firmware package received , select click on "Start" in Odin.

    Once you click "Start " , you will now need to look for the whole process of the firmware is ready to wait. The whole process of firmware update will take about 3 -4 minutes and once done , the phone will automatically restart .
Navigate to the path " Settings> About tablet " where you can check the firmware version 4.4.2 as Kitkat Android OS version XXUCNE4 .
Note: If all Galaxy S4 Active gets in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
So there you go , you have now successfully using the latest version of Android OS 4.4.2 Kitkat updated your tablet . Please let us know in the comments below just in case if you . Facial any questions during the upgrade

Read more »

Download-install and Manual Update Samsung Galaxy S Advance I9070 with Kitkat 4.4.2 Android Firmware (Cyanogen Mod 11)

 

 Samsung I9070 Galaxy S Advance could have been called as "advanced", but Samsung does not recognize them as advanced to the Android OS 4.4.2 Kitkat vocation RAM and other hardware invoice concerns. So, for all those users who wanted to install the latest version of Android 4.4.2 firmware Kitkat, can now manually update the same. Unfortunately, Samsung does not come out with the official firmware update but all thanks to the custom ROM firmware makers who have made it possible. After checking out the list of these Quick below conditions before, we will check out how this firmware application.

 Process for Samsung Galaxy S Advance with Android 4.4.2 firmware update Kitkat:

 Cyanogen Mod 11 Download firmware package and Google Apps Package from here to your computer. Once downloaded, you must have the same in your device to place the .

    Turn on the device so that it can be entered into the recovery mode .

    Press and hold Home + Power + Volume Up button to turn the device into recovery mode. If your Galaxy S Advance is in normal mode , then you need to try again , the process of entering the device is in Recovery Mode .

    In recovery mode , select Clear data "and" to delete Wipe cache " the data and wipe the phone available in your cache.

    Once the data is deleted , select "install zip from SD card " and select the firmware ZIP file that you have provided in the device and then followed by the Google Apps package then . It will take about 4 to 5 minutes, until both of the zip files on the device.

    Once done , select "Back" and select the " Restart in normal mode " option for a device restart normally. Please note that it can sometime take longer than 3 -4 minutes to restart the device to normal mode .
Note: If all Galaxy S Advance is in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
While there are many custom ROM firmware for the Galaxy S Advance Android phone is available , we will continue to come up with the custom ROMs that will help you make the most of your device. So there you go , you have now successfully updated your device with the latest version of 4.4.2 KITKAT in your Galaxy S Advance .

Read more »

Download-install and Update Galaxy Note 2 N7100 with Official Kitkat 4.4.2 Android OS

 

Now it's official, Samsung Galaxy Note 2 Android smartphone with the latest official version of Kitkat 4.4.2 still referred to as XXUFND4 that comes to be updated with tons of new features along with many bug fixes. Interface has become much smoother than before, and this new update comes with the faster performance along with the white status bar icons along with the Samsung better Wallet and KNOX App. After checking out the list of these Quick below conditions before, we will check out what is the method by which you are installing this firmware update.

How to root Galaxy Note N7100 2 on pre- coated XXUFND4 Kitkat Android 4.4.2 Firmware:
    Download Odin along with the firmware package from Kitkat 4.4.2 on your computer and extract both the zip files.

    Open Odin in your computer and turn your device so that it can be entered into the download mode . Now turn off your Galaxy Note 2 so that it will now be entered into the download mode .

    Galaxy Note 2 can press ( middle button) to be entered into the download mode by holding the Volume Down button + the Home key . Hold these two buttons , you must turn on your device.

    If grade 2 comes in the normal mode , then you need the process of in the device into download mode to try again .

    Click " PDA" tab in the Odin to the rooting file that you click " Start" after extracting the firmware package Odin got to select.

    Once you click "Start " , you will now need to look for the whole process of the firmware is ready to wait. The whole process of firmware update will take about 3 -4 minutes and once done , the phone will automatically restart .

    Once the device is rooted , you can now see that the device will reboot and it will take about 3 -5 minutes for setting up the machine . You can relate to whether the device to check with the help of Root Checker app that can be downloaded from the root checker app or not rooted .
Note: If at all Samsung Galaxy Note 2 will be in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
So there you go , you have now successfully inserted the device with the latest firmware from Kitkat Android OS 4.4.2 rooted . We will very soon come up with the custom ROM firmware for your Galaxy Note 2 on the basis of Kitkat 4.4.2 and 4.4.3 firmware. 

Read more »

Download-install and Update Galaxy S Advance I9070 with Kitkat 4.4.2 Android Firmware

 

Samsung I9070 Galaxy S Advance could have been called as "advanced", but Samsung does not recognize them as advanced to the Android OS 4.4.2 Kitkat vocation RAM and other hardware invoice concerns. So, for all those users who wanted to install the latest version of Android 4.4.2 firmware Kitkat, can now manually update the same. Unfortunately, Samsung does not come out with the official firmware update but all thanks to the custom ROM firmware makers who have made it possible. After checking out the list of these Quick below conditions before, we will check out how to install this firmware update.

 

Procedure to Update Samsung Galaxy S Advance with Kitkat 4.4.2 Android Firmware:

• Download Cyanogen Mod 11 Firmware Package and Google Apps Package from here to your computer. Once downloaded, you need to place the same in your device.
•  Turn on the device so that it can be entered into the recovery mode .
  
      Press and hold Home + Power + Volume Up button to turn the device into recovery mode. If your Galaxy S Advance is in normal mode , then you need to try again , the process of entering the device is in Recovery Mode .
  
      In recovery mode , select Clear data "and" to delete Wipe cache " the data and wipe the phone available in your cache.
  
      Once the data is deleted , select "install zip from SD card " and select the firmware ZIP file that you have provided in the device and then followed by the Google Apps package then . It will take about 4 to 5 minutes, until both of the zip files on the device.
  
      Once done , select "Back" and select the " Restart in normal mode " option for a device restart normally. Please note that it can sometime take longer than 3 -4 minutes to restart the device to normal mode .
  Note: If all Galaxy S Advance is in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
  While there are many custom ROM firmware for the Galaxy S Advance Android phone is available , we will continue to come up with the custom ROMs that will help you make the most of your device. So there you go , you have now successfully updated your device with the latest version of 4.4.2 KITKAT in your Galaxy S Advance .

Read more »

Download-install and Update Samsung Galaxy ACE 2 with Kitkat 4.4.2 Firmware

 

Note: This update is the custom ROM firmware and not the official firmware from Samsung released.

Quick Pre-requisites:

      All data in your Samsung Galaxy ACE 2 must be secured using the steps mentioned below and not with the Samsung KIES, so as to ensure that the data be restored manually.

Go to the path "Settings> Applications> Development> USB Debugging" on your Samsung Galaxy ACE 2 to enable the USB debugging mode. Could charge batteries in the left device must have a minimum of 60% or other device to be getting off in the middle of firmware update.

      Since this is the custom ROM firmware, you must ensure that your phone is rooted. Download "Root Checker" app. Just in case, if the device is not rooted, it is imperative that the root of the device. You must also ensure that you are not under the backup using the ROM Manager app.

 Update process for Galaxy ACE 2 with Android 4.4.2 firmware Kitkat :

    Cyanogen Mod 11 Download firmware package and Google Apps Package from here to your computer. Once downloaded, you must have the same in your device to place the .
    Turn on the device so that it can be entered into the recovery mode .

    Press and hold Home + Power + Volume Up button to turn the device into recovery mode. If your Galaxy ACE 2 is in the normal mode , then you need to try again , the process of entering the device is in Recovery Mode . You can also enter the device in recovery mode by using the ROM Manager app.

    In recovery mode , select Clear data "and" to delete Wipe cache " the data and wipe the phone available in your cache.

    Once the data is deleted , select "install zip from SD card " and select the firmware ZIP file that you have provided in the device and then followed by the Google Apps package then . It will take about 4 to 5 minutes, until both of the zip files on the device.

    Once done , select "Back" and select the " Restart in normal mode " option for a device restart normally. Please note that it can sometime take longer than 3 -4 minutes to restart the device to normal mode .

    If you are getting all the force close error , restart the device back into recovery mode and then clear the cache and wipe the data , start the unit in the normal mode.

    Go to the path " Settings> Phone " to know the firmware version , the details are mentioned as KITKAT 4.4.2 .Note: If all Galaxy ACE 2 gets in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.Please let us know just in case if you ask any questions in the comments section . Alternatively, we will also come out with the custom ROM firmwares that will ensure that you make the most of it .

Read more »

Download-install and Update Galaxy S5 with Official XXU1ANE2 Kitkat 4.4.2 Firmware

 

Procedure to Update Galaxy S5 with Kitkat 4.4.2 XXU1ANE2 Firmware:

• Download KitKat 4.4.2 Android Firmware Package and Odin from here to your computer. Once downloaded, open Odin in your computer and turn Off your device so that it can be entered in the Download Mode.

• Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy S5 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Click on “AP” tab in the Odin to select the tar file which you got after extracting the firmware package to click on “Start” in Odin.

• Once you click on “Start”, you will now need to wait for the whole process of firmware gets finished. The whole process of firmware update will take around 3 -4 minutes and once done, the phone will be rebooted automatically.

Note: If at all your Galaxy S5 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

So there you go, you have now successfully updated the latest firmware version of KitKat 4.4.2 android firmware. Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download-install and Manual Update Galaxy Note 3 with Official XXUEND6 Kitkat 4.4.2 Firmware (Battery Optimized)

Procedure to Update Galaxy Note 3 with Kitkat 4.4.2 Android Firmware:

• Download Kitkat 4.4.2 Firmware Package and Odin from here to our computer. Once downloaded, extract both the zip files in your computer and then turn Off your Galaxy Note 3 so that it can be entered in the Download mode.

• After turning off the device, you need to press Home + Power + Volume down buttons to enter Galaxy Note 3 in the Download Mode. If device enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Open Odin tool which was extracted in the initial step to connect the device with the computer using original USB cable. Once connected, you will see that the ID: COM section will turn Blue/ Green/ Yellow indicating that all the drivers are installed successfully. Please note that it will take around 2 -3 minutes for applying the update.

• Click on “AP” / “PDA” tab in the Odin to select the tar file which you got after extracting the firmware tar file to click on “Start” in Odin.

• Make sure to check options “Auto Reboot” and “F.Reset Time.” Check “Re-Partition” option in Odin only if you selected the .pit file.

• Once clicked on “Start”, it will take around 4 – 5 minutes for updating the device. Once the firmware is updated, device will be rebooted. Please note that it may take a while for device to reboot as it’s the firmware time device will be booted since the firmware update.

• Check the firmware version from the path “Settings > About Phone” to check the firmware version which should read as XXUEND6 Kitkat 4.4.2 Android OS.

Note: If at all your Galaxy Note 3 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.

Do let us know in the comments section just in case if you face any issues in the comments section below.

Read more »

List of Samsung Galaxy Android Phones KitKat Update Status Leaked

A leaked document from Samsung has revealed the list of smartphones which are going to get the Android KitKat update, and the phones which are not getting it right away because of some issues which the company is facing on the devices during testing. The problem these days for the users isn’t with the compatibility of the apps with the OS version, but the need for the latest OS to get the newer features which they don’t find in the current / previous OS version in their smartphone. Thus is the need for the latest OS version, and KitKat being the latest one, millions of users are waiting for the update to be rolled out for their device.

At the right time, Samsung’s document with the status is leaked, and it’s SamMobile who grabbed that to give the users a list of devices which might be getting the update in the near future, and for the ones whose update is delayed.

The KOT49H here is referred to the Android 4.4.2 version release, and below are the devices and the update status for them.

• Samsung Galaxy Note II GT-N7100 – Available – ETA April 2014
• Samsung Galaxy Note II LTE GT-N7105 – Completed – ETA May 2014
• Samsung Galaxy S3 GT-I9300 – Update canceled due to unsolved problems
• Samsung Galaxy S3 LTE GT-I9305 – Final Testing – ETA May 2014
• Samsung Galaxy S4 Mini GT-I9190 – Final Testing – ETA June 2014
• Samsung Galaxy S4 Mini LTE GT-I9195 – Completed – ETA June 2014
• Samsung Galaxy Note 3 Neo SM-N750 – Completed – ETA May 2014
• Samsung Galaxy Grand 2 SM-G7102 – Testing – ETA June 2014
• Samsung Galaxy Mega 5.8 GT-I9152 – Testing – ETA June 2014
• Samsung Galaxy Mega 6.3 GT-I9200 – Testing – ETA June 2014

The Galaxy Note II LTE version update has been completed and it is waiting for the approval of the firmware center before it is rolled out to the devices.
The Galaxy Note 3 Neo’s KitKat update is waiting to be certified by Google.
The Galaxy S4 Mini’s firmware update is waiting the approval of the firmware center.

Given the OS version mentioned by Samsung, it is pretty clear that a few devices are skipping the Android 4.3 update and directly would be getting the KitKat update.
Source: SamMobile

Read more »

Download and install Manual Update Galaxy Mega 6.3 Cyanogen Mod 11 with Kitkat 4.4.2 Android Firmware

 

Galaxy Mega 6.3 Android smartphone can now be updated with the Cyanogen Mod 11 firmware which ropes in the latest Kitkat 4.4.2 Android OS. The best part is that it comes with the added features which otherwise is only available with the Kitkat 4.4.2 Android OS which is available with the Nexus range of smartphones. Please note that this is not the official firmware reelased by Samsung and is the Cyanogen Mod 11 firmware which ropes in the goodness of Kitkat 4.4.2 Android firmware. While there are no updates on by when there will be official Kitkat 4.4.2 Android firmware for this smartphone, let’s check out on how you can apply this update manually.

Note: Please note that since this is the custom ROM firmware, you need to root the same.

Procedure to Update Galaxy Mega 6.3 Android smartphone with Cyanogen Mod 11 Firmware:

• Download the Kitkat 4.4.2 Android Firmware and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the same in your device.
• Disconnect the device from computer and turn Off the same so that the device can be entered in the recovery mode.

• Recovery mode in Galaxy Mega 6.3 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.

• In recovery mode, select options to clear and wipe the data present in your phone by selecting the options like “Clear Data” and “Wipe Cache”.

• Once done, you now need to select the option of “install zip from sd card” and then select the firmware zip file which you have placed in the device and then followed by the Google Apps Package. It will take around 4 -5 minutes to apply both the zip files in your device.

Note: If at all your Galaxy Mega 6.3 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

So there you go, you have successfully updated your device with the latest version of Kitkat 4.4.2 Android OS. Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download and install Update Galaxy S3 I9300 with Galaxy S5 styled Kitkat 4.4.2 Firmware

 

Revolutionary Kitkat 4.4.2 Firmware for Galaxy S3 is finally here and for all those users who are having the Galaxy S3 smartphone can now update with this latest version of Kitkat 4.4.2 Android OS. This new update comes with tons of new features which are otherwise there in the Galaxy S5 smartphone. While Samsung is still keeping its mum on by when there will be an official firmware update of Kitkat 4.4.2 for Galaxy S3, this one is one of the most stable kitkat 4.4.2 android firmware. After checking out on what are the quick list of pre requisites mentioned below, we will be checking out on what is the procedure with which you can apply this firmware update.

Note: This update should only be applied to the Galaxy S3 I9300 Android phone and not to any other Galaxy S3 variants as it may even brick the device.

Features:

• All S5 UI sounds
• All S5 ringtones
• All S5 Alarms
• All S5 notification sounds
• S5 boot animation(true)
• S5 boot sounds
• New S5 default wallpaper
• Complete S5 UI
• True S5 UI icons
• S5 status bar
• S5 framework(updated)
• Slightly faster
• Android Secure wiped while wiping /data
• Re-enabled ink effect
• More S5 icons(in launcher)
• S5 download UIProcedure to Update Galaxy S3 with Kitkat 4.4.2 Android Firmware:
  
• Check on whether your device is rooted or not. With the help of “Root Checker” app, you can check on whether the device is rooted or not. Just in case if your device is not rooted, you need to root the device with the help of below mentioned step;

• Download the Kitkat 4.4.2 Android Firmware Zip package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the same in your device.

• Disconnect the device and turn off your device so that it can be entered in the Recovery Mode. Press and hold Home + Power + Volume Up buttons to enter the device in the Download Mode. If your Galaxy S3 i9300 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• In recovery mode, select Clear Data” and “Wipe Cache” to clear the data and wipe the cache present in your phone.

• Once the data is cleared, select the option of “install zip from sd card” and then select the firmware zip file which you have placed in the device and then followed by the Google Apps Package. It will take around 4 -5 minutes to apply both the zip files in your device.

• Once done, select “go back” and choose the option of “reboot in normal mode” for rebooting the device normally. Please note that it may sometime take more than 4 -5 minutes for rebooting the device in the normal mode.

Note: If at all your Galaxy S3 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully applied the latest firmware update of KITKAT 4.4.2 in your Galaxy S3 GT I9300 Android phone. Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download and install Update Galaxy S3 GT I9300 with Kitkat 4.4.2 Android Firmware (OmniRom)

Omni ROM Android custom ROM firmware is one of the most used custom ROM firmware by all Galaxy S3 users. So for all those who want to experience the best of Kitkat 4.4.2 Android firmware can now make use of this custom ROM firmware as it comes lots of new features. This firmware comes with many bug fixes along with the additional customizations which even allows you to play with different boot screens. So after checking out the detailed list of quick pre requisites, we will be checking out on what are the instructions with which you can apply this Omni ROM in your device.

Quick Pre Requisites:

• All the data in your Galaxy S3 should be backed up with the help of below mentioned manual steps. Don’t make use of KIES for backing the data up as it may not help you detect the device as this being the custom ROM firmware.

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

• Head over to the path “Settings > Applications > Development > USB debugging” in your Samsung Galaxy S3 so as to enable the USB Debugging Mode.

Disclaimer: We should not be held responsible in any manner for any damage happened to your Galaxy S3 due to not following the instructions mentioned in the article.
Let’s head over to the detailed guide which will empower you to update your Galaxy S3 with this latest update.
Procedure to update Galaxy S3 with OmniROM Kitkat 4.4.2 Firmware Update:

• Download Omni ROM Custom ROM Firmware Zip and Google Apps from here to your computer. Once downloaded, connect your device to the computer and place this zip file in your Galaxy S3.

• Disconnect the device from computer and check on whether your device is rooted or not which can be checked with the help of Root Checker app. You can download Root Checker app from Google PLAY Store. Just in case if your device is not rooted, you need to root the same with the help of below mentioned 2 steps.

• You need to root the device so as to continue. Once done, you now need to download the “ROM Manager” app from Google PLAY Store and install the custom recovery image in your Galaxy S3.

• Once custom recovery image is installed successfully, open the ROM manager app to enter the device in recovery mode.

• Alternatively, recovery mode in Galaxy S3 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.

• In recovery mode, select options to clear and wipe the data present in your phone by selecting the options like “Clear Data” and “Wipe Cache”.

• Once done, you now need to select the option of “install zip from sd card” and then select the firmware zip file which you have placed in the device and then followed by the Google Apps Package. It will take around 4 -5 minutes to apply both the zip files in your device.

• Once done, select “go back” and choose the option of “reboot in normal mode” for rebooting the device normally. Please note that it may sometime take more than 4 -5 minutes for rebooting the device in the normal mode.

• To check on whether the firmware is update or not, you need to head over to the path “Settings > About Phone” where the current firmware will be mentioned as Kitkat 4.4.2 firmware.

Note: If at all your Galaxy S3 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully learnt on how to update with the latest version of Kitkat 4.4.2 Android firmware. Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download and install Manual Update Galaxy Tab 3 8.0 with Kitkat 4.4.2 XWUANA1 Android firmware

 

Procedure to Update Galaxy Tab 3 8.0 with Kitkat 4.4.2 Android OS:

• Download Kitkat 4.4.2 Android OS package and Odin from here to your computer. Once downloaded, you need to extract the odin in your computer and firmware package in your device.

• Turn off your Galaxy Tab 3 8.0 and after 5 seconds or when your device gives a small vibration, hold the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device to see the Green Robot on the screen.

• Connect your device in Download mode with the computer in which you have opened the Odin. In Odin you will see that the ID:COM section will turn yellow indicating that all the drivers are installed successfully.

• Once done, click on “PDA” / “AP” depending upon the Odin version to choose the firmware tar file which you got after extraction and click on “Start” to start the process of rooting. It will take around a minute for rooting the device. In some cases it may take even longer time than expected.

• Once the firmware is updated successfully, the tablet will be rebooting on its own and will install all the apps.

Note: Just in case if your Samsung Galaxy Tab 3 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully updated the latest version of firmware update in your device. Do let us know in the comments section just in case if you face any issues in the process of firmware update. We will very soon be coming out with the process which will help you root the device so that you can then install custom ROM firmwares.

Read more »

Download and install Manual Update Galaxy S GT I9000 with Kitkat 4.4.2 Android os Firmware

 

Procedure to Update Galaxy S I9000 with Kitkat 4.4.2 Android OS:

• Download Kitkat 4.4.2 Android OS package and Google Apps Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place the same in your device.

• For applying this update, you will have to root the device. To check on whether your phone is rooted or not, you will have to download “Root Checker” app from the Google PLAY Store and check on whether the device is rooted or not. Please note that just in case if you haven’t rooted your device, then with the help of below links you can easily update and root the device.

• Turn off your Galaxy S  and after 5 seconds or when your device gives a small vibration, hold the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device to see the Green Robot on the screen.

• Samsung Galaxy S GT I9000 can be entered in the recovery mode by pressing the Volume Up Key, Center button, and holding both simultaneously press the Power Button.

• In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition which will clear out all the cache data present in your device, if you skip this step then you may face issues like force close issues in your Galaxy S.

• Select “install zip from sd card” > “choose zip from sd card” and then choose the custom ROM firmware package to select “Yes” with the help of Volume rocker keys and Menu button. Once the file is selected, it will take around 5 – 7 minutes for applying the same.

Note: Just in case if your Samsung Galaxy S gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully updated the latest version of firmware update in your device. Do let us know in the comments section just in case if you face any issues in the process of firmware update. We will very soon be coming out with the process which will help you to make the most of your android device.

Read more »

Download and install Manual Update Galaxy Note 3 N900 with Kitkat 4.4.2 Android Firmware

 

Procedure to Update Galaxy Note N900 with Kitkat 4.4.2 Android Firmware:

• Download KitKat 4.4.2 XXUDNC4 Android Firmware Package and Odin from here to your computer. Once downloaded, open Odin in your computer and turn Off your device so that it can be entered in the Download Mode.

• Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy Note 3 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Click on “AP” tab in the Odin to select the tar file which you got after extracting the firmware package to click on “Start” in Odin.

• Once you click on “Start”, you will now need to wait for the whole process of firmware gets finished. The whole process of firmware update will take around 3 -4 minutes and once done, the phone will be rebooted automatically.

Note: If at all your Galaxy Note 3 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully updated the firmware of your galaxy Note 3 with the latest version of Kitkat 4.4.2 Android firmware. Do let us know in the comments section just in case if you come up with any issues. We will very soon be coming out with the detailed guide which will root the device on this firmware.

Read more »

Download and install Manual Update Galaxy S2 GT I9100 with Kitkat 4.4.2 Android OS

 

Procedure to Update Galaxy S2 GT I9100 with Kitkat 4.4.2 Android OS:

• Download KitKat 4.4.2 Android Firmware package and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the two zip files in your device.
• Press and hold Home + Power + Volume Up buttons to enter the device in the Recovery Mode. If your Galaxy S2 I9100 enters in the Normal mode, then you need to re try the process of entering the device in the Recovery Mode. You can also enter the device in the recovery mode with the help of ROM Manager app.

• In recovery mode, you need to clear and wipe the data present in your phone by selecting the options like “Clear Data” and “Wipe Cache” options.

• Select “install zip from sd card” and then select the firmware zip file which you have placed in the device. It will take around 4 -5 minutes to apply both the zip files in your device.

• Once done, select “go back” and choose the option of “reboot in normal mode” for rebooting the device normally. Please note that it may sometime take more than 4 -5 minutes for rebooting the device in the normal mode.

• To check on whether the firmware is update or not, you need to head over to the path “Settings > About Phone” where the current firmware will be mentioned as Kitkat 4.4.2 firmware.

Note: If at all your Galaxy S2 I9100 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
Do let us know in the comments section just in case if you face any issues in the process of firmware update. You have now successfully updated the latest version of Jellybean 4.3 Android firmware in your Samsung Galaxy S2 I9100 Android smartphone.

Read more »

Download and install Manual Update Galaxy Note 2 N7100 with Official Kitkat 4.4.2 Android OS

 

Procedure to Update Galaxy Note 2 N7100 with Offiical XXUFND3 Kitkat 4.4.2 Android Firmware:

• Download Odin along with the Kitkat 4.4.2 Android Firmware package in your computer and extract both the zip files.

• Open Odin in your computer and turn off your device so that it can be entered in the download mode. Now, turn off your Galaxy Note 2 so that it will now have to be entered in the Download Mode. Download Mode.

• Galaxy Note 2 can be entered into the Download mode by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.

• If Note 2 enters in the normal mode, then you will have to retry the process of entering the device in the download mode.

• Click on “PDA” tab in the Odin to select the firmware tar file which you got after extracting the firmware package to click on “Start” in Odin.

• Once you click on “Start”, you will now need to wait for the whole process of firmware gets finished. The whole process of firmware update will take around 3 -4 minutes and once done, the phone will be rebooted automatically.

• As soon as the firmware updating process gets completed, you will now see that the device will be rebooted and it will take around 3 -5 minutes for setting up the device.

Note:  If at all your Galaxy Note 2 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

So there you go, you have now successfully updated the device with the latest firmware of Kitkat 4.4.2 Android OS. We will very soon come up with the article which will even help you root the device.

Read more »

Root Galaxy Note 2 N7100 on Official Kitkat 4.4.2 XXUFND3 Firmware

 

Procedure to Root Galaxy Note 2 N7100 on Offiical XXUFND3 Kitkat 4.4.2 Android Firmware:

• Download Odin along with the Rooting Tar in your computer and extract both the zip files.

• Open Odin in your computer and turn off your device so that it can be entered in the download mode. Now, turn off your Galaxy Note 2 so that it will now have to be entered in the Download Mode.

• Galaxy Note 2 can be entered into the Download mode by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.

• If Note 2 enters in the normal mode, then you will have to retry the process of entering the device in the download mode.

• Click on “PDA” tab in the Odin to select the rooting file which you got after extracting the firmware package to click on “Start” in Odin.

• Once you click on “Start”, you will now need to wait for the whole process of firmware gets finished. The whole process of firmware update will take around 3 -4 minutes and once done, the phone will be rebooted automatically.

• As soon as the device is rooted, you will now see that the device will be rebooted and it will take around 3 -5 minutes for setting up the device. You can check on whether the device is rooted or not with the help of Root Checker app which can be downloaded from the Root Checker app.

Note:  If at all your Galaxy Note 2 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully rooted the device with the latest firmware of Kitkat 4.4.2 Android OS. We will very soon come up with the custom ROM firmwares for your Galaxy Note 2 based on the Kitkat 4.4.2 and 4.4.3 firmwares.

Read more »

Download and install Manual Update Galaxy Note 10.1 N8000 with Official Kitkat 4.4.2 Android Firmware

 

Procedure to Update Galaxy Note 10.1 N8000 with Kitkat 4.4.2 Firmware:

• Download Odin and Firmware Package of Kitkat 4.4.2 from here to your computer. Once downloaded, extract both the zip files in your computer.

• Turn Off your device so that it can be entered in the download mode. Download mode in Galaxy Note 10.1 can be entered by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. If the tablet enters in the normal mode, you need to retry the process of entering the device in the Download mode.

• Open Odin in your computer and connect your Galaxy Tab 10.1 device to the computer while in the download mode to see ID: COM section turns Blue. Once it turns blue, it will indicate that all the required drivers are installed successfully and select below mentioned files in Odin.

- Add AP_N8000XXUDND5.tar.md5 to AP
- Add BL_N8000XXUDND5.tar.md5 to BL
- Add MODEM_N8000XXUDND2.tar.md5 to CP
- Add CSC_OXA_N8000OXADND5.tar.md5 to CSC

• Make sure re-partition is NOT ticked in Odin. Once the above files are selected, click on “Start” to start the process of firmware update. It will take around 3 -4 minutes for applying the update. Once the firmware is applied, tablet will be rebooted automatically.

• It will take 5 – 7 minutes for loading all the apps and applying the update in the device. Don’t disconnect the device from Odin till you see the home screen in your tablet. Once you see the home screen, you need to disconnect the device from computer.

• Head over to the path “Settings > More > About Tablet” to check out the latest version of firmware which will be mentioned as Kitkat 4.4.2 OS with the version detail as XXUDND5.

Note:  If at all your Galaxy Note 10.1 N8000 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can long press the power button.

So there you go, you have now successfully applied the latest firmware update of Kitkat 4.4.2 Android OS in the tablet manually. Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »