Download-install and Manual Update Galaxy Note 3 with Official XXUEND6 Kitkat 4.4.2 Firmware (Battery Optimized)

Procedure to Update Galaxy Note 3 with Kitkat 4.4.2 Android Firmware:

• Download Kitkat 4.4.2 Firmware Package and Odin from here to our computer. Once downloaded, extract both the zip files in your computer and then turn Off your Galaxy Note 3 so that it can be entered in the Download mode.

• After turning off the device, you need to press Home + Power + Volume down buttons to enter Galaxy Note 3 in the Download Mode. If device enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Open Odin tool which was extracted in the initial step to connect the device with the computer using original USB cable. Once connected, you will see that the ID: COM section will turn Blue/ Green/ Yellow indicating that all the drivers are installed successfully. Please note that it will take around 2 -3 minutes for applying the update.

• Click on “AP” / “PDA” tab in the Odin to select the tar file which you got after extracting the firmware tar file to click on “Start” in Odin.

• Make sure to check options “Auto Reboot” and “F.Reset Time.” Check “Re-Partition” option in Odin only if you selected the .pit file.

• Once clicked on “Start”, it will take around 4 – 5 minutes for updating the device. Once the firmware is updated, device will be rebooted. Please note that it may take a while for device to reboot as it’s the firmware time device will be booted since the firmware update.

• Check the firmware version from the path “Settings > About Phone” to check the firmware version which should read as XXUEND6 Kitkat 4.4.2 Android OS.

Note: If at all your Galaxy Note 3 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.

Do let us know in the comments section just in case if you face any issues in the comments section below.

Read more »

Download and install Manual Update Galaxy Note 3 N900 with Kitkat 4.4.2 Android Firmware

 

Procedure to Update Galaxy Note N900 with Kitkat 4.4.2 Android Firmware:

• Download KitKat 4.4.2 XXUDNC4 Android Firmware Package and Odin from here to your computer. Once downloaded, open Odin in your computer and turn Off your device so that it can be entered in the Download Mode.

• Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy Note 3 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Click on “AP” tab in the Odin to select the tar file which you got after extracting the firmware package to click on “Start” in Odin.

• Once you click on “Start”, you will now need to wait for the whole process of firmware gets finished. The whole process of firmware update will take around 3 -4 minutes and once done, the phone will be rebooted automatically.

Note: If at all your Galaxy Note 3 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully updated the firmware of your galaxy Note 3 with the latest version of Kitkat 4.4.2 Android firmware. Do let us know in the comments section just in case if you come up with any issues. We will very soon be coming out with the detailed guide which will root the device on this firmware.

Read more »

Download and install Manual Update Galaxy Note 3 N900 with Official XXUDNC4 Kitkat 4.4.2 Firmware

 

• Download KitKat 4.4.2 XXUDNC4 Android Firmware Package and Odin from here to your computer. Once downloaded, open Odin in your computer and turn Off your device so that it can be entered in the Download Mode.

• Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy Note 3 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Click on “AP” tab in the Odin to select the tar file which you got after extracting the firmware package to click on “Start” in Odin.

• Once you click on “Start”, you will now need to wait for the whole process of firmware gets finished. The whole process of firmware update will take around 3 -4 minutes and once done, the phone will be rebooted automatically.

Note: If at all your Galaxy Note 3 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download and install Update Galaxy Note 3 Neo N750 with Jellybean 4.3 XXUANAD Android Firmware

,

Procedure to Update Galaxy Note 3 Neo N750 with XXUANAD Jellybean 4.3 Android Firmware:

• Download Firmware for Galaxy Note 3 Neo N750 and Odin from here to your computer. Once downloaded, extract both the files and open Odin in your computer.

• Turn off your device so that it can be entered in the Download Mode. Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy Note 3 Neo N750 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Connect your phone to the computer while keeping Odin opened in your computer. Once connected, you will see that the ID: COM section will turn Blue/ Green/ Yellow indicating that all the drivers are installed successfully.

• In Odin, click on “AP” to select the PDA file which you got upon extracting the file in your computer. Once selected, click on “Start” to start the process of firmware update. Make sure that in Odin, Auto Reboot and F: Reset Time check boxes are selected.

• The whole process of firmware update will take around 4- 5 minutes and once done you will have to wait for the device to install all the apps in the device.

• As soon as the device gets rebooted, you can then head over to the Settings > More to check out the current version details in About Phone section where it will be mentioned as XXUANAD Jellybean 4.3 firmware.
•  Note: If at all your Galaxy Note 3 Neo N750 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.

Read more »