Download Manual install and Update Galaxy Tab 7.7 with ICS 4.0.4 XXLQ1 Firmware

Procedure to Update Galaxy Tab 7.7 with ICS 4.0.4 Firmware:

• Download the ICS 4.0.4 Firmware Package from here to your computer. Once downloaded, you need to connect your Galaxy Tab with the computer using the original USB cable and then followed by which place the downloaded zip file in your device. Ensure that you are not placing the file deep into any of the sub folders.

• Once the file is placed, disconnect the device connected from the computer and turn off the same so that it can be then entered in the recovery mode. Press the Volume Up + Power keys together so that it can be entered in the recovery mode. If the device turns On in the normal mode, you need to again retry the process of firmware update.

• Now, in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the P6800XXLQ1_ICS_IT168.zip which you have placed in the device. Once its selected, it will take around 4 – 5 minutes for applying he update. As soon as its updated, you will see that you will be asked with the Language preferences setting and then you will have to disconnect the device connected from the computer. To check on the firmware has been updated or not, you need to check from the path Settings > About Tablet > Firmware Version where you will see that the firmware version as 4.1. In the next coming days, we will be coming up with more custom ROM firmwares.

Note: Just in a rare case if your Samsung device refuses to turn ON or say if it gets stuck on the Samsung Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from the start.

So there you go you have now successfully updated your device with the latest firmware of the ICS 4.0.4 in your Samsung Galaxy Tab 7.7. Do let us know in the comments section just in case if you face any issues in the comments section below.