Download and install Update Galaxy S3 I9300 with Galaxy S5 styled Kitkat 4.4.2 Firmware

 

Revolutionary Kitkat 4.4.2 Firmware for Galaxy S3 is finally here and for all those users who are having the Galaxy S3 smartphone can now update with this latest version of Kitkat 4.4.2 Android OS. This new update comes with tons of new features which are otherwise there in the Galaxy S5 smartphone. While Samsung is still keeping its mum on by when there will be an official firmware update of Kitkat 4.4.2 for Galaxy S3, this one is one of the most stable kitkat 4.4.2 android firmware. After checking out on what are the quick list of pre requisites mentioned below, we will be checking out on what is the procedure with which you can apply this firmware update.

Note: This update should only be applied to the Galaxy S3 I9300 Android phone and not to any other Galaxy S3 variants as it may even brick the device.

Features:

• All S5 UI sounds
• All S5 ringtones
• All S5 Alarms
• All S5 notification sounds
• S5 boot animation(true)
• S5 boot sounds
• New S5 default wallpaper
• Complete S5 UI
• True S5 UI icons
• S5 status bar
• S5 framework(updated)
• Slightly faster
• Android Secure wiped while wiping /data
• Re-enabled ink effect
• More S5 icons(in launcher)
• S5 download UIProcedure to Update Galaxy S3 with Kitkat 4.4.2 Android Firmware:
  
• Check on whether your device is rooted or not. With the help of “Root Checker” app, you can check on whether the device is rooted or not. Just in case if your device is not rooted, you need to root the device with the help of below mentioned step;

• Download the Kitkat 4.4.2 Android Firmware Zip package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the same in your device.

• Disconnect the device and turn off your device so that it can be entered in the Recovery Mode. Press and hold Home + Power + Volume Up buttons to enter the device in the Download Mode. If your Galaxy S3 i9300 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• In recovery mode, select Clear Data” and “Wipe Cache” to clear the data and wipe the cache present in your phone.

• Once the data is cleared, select the option of “install zip from sd card” and then select the firmware zip file which you have placed in the device and then followed by the Google Apps Package. It will take around 4 -5 minutes to apply both the zip files in your device.

• Once done, select “go back” and choose the option of “reboot in normal mode” for rebooting the device normally. Please note that it may sometime take more than 4 -5 minutes for rebooting the device in the normal mode.

Note: If at all your Galaxy S3 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully applied the latest firmware update of KITKAT 4.4.2 in your Galaxy S3 GT I9300 Android phone. Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download and install Update Galaxy S3 GT I9300 with Kitkat 4.4.2 Android Firmware (OmniRom)

Omni ROM Android custom ROM firmware is one of the most used custom ROM firmware by all Galaxy S3 users. So for all those who want to experience the best of Kitkat 4.4.2 Android firmware can now make use of this custom ROM firmware as it comes lots of new features. This firmware comes with many bug fixes along with the additional customizations which even allows you to play with different boot screens. So after checking out the detailed list of quick pre requisites, we will be checking out on what are the instructions with which you can apply this Omni ROM in your device.

Quick Pre Requisites:

• All the data in your Galaxy S3 should be backed up with the help of below mentioned manual steps. Don’t make use of KIES for backing the data up as it may not help you detect the device as this being the custom ROM firmware.

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

• Head over to the path “Settings > Applications > Development > USB debugging” in your Samsung Galaxy S3 so as to enable the USB Debugging Mode.

Disclaimer: We should not be held responsible in any manner for any damage happened to your Galaxy S3 due to not following the instructions mentioned in the article.
Let’s head over to the detailed guide which will empower you to update your Galaxy S3 with this latest update.
Procedure to update Galaxy S3 with OmniROM Kitkat 4.4.2 Firmware Update:

• Download Omni ROM Custom ROM Firmware Zip and Google Apps from here to your computer. Once downloaded, connect your device to the computer and place this zip file in your Galaxy S3.

• Disconnect the device from computer and check on whether your device is rooted or not which can be checked with the help of Root Checker app. You can download Root Checker app from Google PLAY Store. Just in case if your device is not rooted, you need to root the same with the help of below mentioned 2 steps.

• You need to root the device so as to continue. Once done, you now need to download the “ROM Manager” app from Google PLAY Store and install the custom recovery image in your Galaxy S3.

• Once custom recovery image is installed successfully, open the ROM manager app to enter the device in recovery mode.

• Alternatively, recovery mode in Galaxy S3 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.

• In recovery mode, select options to clear and wipe the data present in your phone by selecting the options like “Clear Data” and “Wipe Cache”.

• Once done, you now need to select the option of “install zip from sd card” and then select the firmware zip file which you have placed in the device and then followed by the Google Apps Package. It will take around 4 -5 minutes to apply both the zip files in your device.

• Once done, select “go back” and choose the option of “reboot in normal mode” for rebooting the device normally. Please note that it may sometime take more than 4 -5 minutes for rebooting the device in the normal mode.

• To check on whether the firmware is update or not, you need to head over to the path “Settings > About Phone” where the current firmware will be mentioned as Kitkat 4.4.2 firmware.

Note: If at all your Galaxy S3 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
So there you go, you have now successfully learnt on how to update with the latest version of Kitkat 4.4.2 Android firmware. Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download and install Upgrade Galaxy S3 I9300 with Official Jellybean 4.3 XXUGND1 Firmware

 

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.3 XXUGND1 Android OS:

• Download Odin and XXUGND1 Android firmware package (Alternate Link) from here to your computer. Once downloaded, extract both the firmwares in your computer.

• Turn off your device so that it can be entered in the Download Mode. Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy S3 i9300 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Connect your device to the computer using the original USB cable to see that the ID: COM section turns Blue which indicates that all the drivers have been installed in the computer.

• Now, in Odin, select Auto Reboot and F. Reset Time options. But, the Re-Partition option must be checked.

• Click on “AP” to choose the tar file which you got after extracting the firmware file. Once the tar file is selected, click on “Start” to start the process of firmware update. Please note that the whole process of firmware update will take around 4 -5 minutes and once done, you now need to wait to see “PASS” in Odin.

• Once the firmware is applied successfully, you need to head over to the path Settings > More > About Phone where the current version of firmware will be mentioned as XXUGND1.

• If you get to see the Google Apps crashed, you need to enter the device in the recovery mode. Press and hold Home + Power + Volume Up buttons to enter the device in the recovery Mode.  In recovery mode, select “Clear Cache/ Wipe Data” options to clear the cache and wipe the data.

Note: If at all your Galaxy S3 I9300 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.
So there you go, you have now successfully applied the firmware of XXUGND1 in your Galaxy S3 device. Very soon we will also be coming out with the detailed guide which will help you root the device and install the custom ROM firmwares.

Read more »

How to Root Galaxy S3 GT I9300 on XXUGNB6 Firmware

 

Procedure to Root Galaxy S3 GT I9300 on XXUGNB6 Firmware:

• Download  XXUGNB6 Rooting Package along with Odin from here to your computer. Once downloaded, you now need to enter your Galaxy S3 I9300 in download mode.

• Turn off your Galaxy S3 I9300 and after 5 seconds or when your device gives a small vibration, hold the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device to see the Green Robot on the screen.

• Connect your device in Download mode with the computer in which you have opened the Odin. In Odin you will see that the ID:COM section will turn yellow indicating that all the drivers are installed successfully.

• Once done, click on “PDA” / “AP” depending upon the Odin version to choose the Rooting tar file which you got after extraction and click on “Start” to start the process of rooting. It will take around a minute for rooting the device. In some cases it may taken even longer time than expected.

• Download the “Root Checker” app from the Google PLAY Store to check on whether the device is rooted or not. Just in case if the device is not rooted, you need to retry the process of rooting.

Tip: Since rooting voids warranty, if you need to get back the lost warranty, you need to update the device with the below mentioned firmware by following the respective instructions.
Manual Update Galaxy S3 GT I9300 with Official Jellybean 4.3 XXUGNB6 Firmware – Guide
Note: Just in case if your Samsung Galaxy S3 GT I9300 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
Do let us know in the comments section or on out Facebook / Google+ Page if you face any issues. We will very soon be coming up with the detailed guide which will help you install the custom ROM firmwares.

Read more »

Download and install Update Galaxy S3 with most stable & Official Jellybean 4.3 XXUGNB6 Android Firmware

 

Guide to Update Galaxy S3 with Jellybean 4.3 Android OS:

• Download the Jellybean 4.3 Android OS Package  and Odin from here to your computer. Once downloaded, extract both the packages and open Odin in your computer.

• Turn off your device so that it can be entered in the Download Mode. Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy S3 i9300 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Connect your device to the computer using the original USB cable to see that the ID: COM section turns Blue which indicates that all the drivers have been installed in the computer.

• Now, in Odin, select Auto Reboot and F. Reset Time options. But, the Re-Partition option must be checked.

• Click on “AP” to choose the tar file which you got after extracting the firmware file. Once the tar file is selected, click on “Start” to start the process of firmware update. Please note that the whole process of firmware update will take around 4 -5 minutes and once done, you now need to wait to see “PASS” in Odin.

• If Google Apps gets crashed after installing, you need to turn Off the device so that it can be entered in the recovery mode. Press and hold Home + Power + Volume Up buttons to enter the device in the Recovery Mode. If your Galaxy S3 i9300 enters in the Normal mode, then you need to re try the process of entering the device in the Recovery Mode.

• In recovery mode, select “Clear Cache/ Wipe Data” options to clear the cache and wipe the data. As soon as the device gets rebooted, you can then head over to the Settings > More to check out the current version details in About Phone section where it will be mentioned as XXUGNB6 Jellybean 4.3 Android OS.

Note: If at all your Galaxy S3 I9300 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.
Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download and install Update Galaxy S3 I9305 with Official Jellybean 4.1.2 XXBMA3 Firmware

 

Procedure to Update Galaxy S3 I9305 with XXBMA3 Jellybean 4.1.2 Firmware Update:

• Download the XXBMA3 Jellybean 4.1.2 Firmware Package + Odin from here to your computer. Once done, extract both the files and open Odin in your computer.

• Turn Off your phone so that it can be entered in the download mode. Download mode in Galaxy S3 GT I9300 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the download mode.

• Connect your phone in the download mode to the computer while keeping Odin opened. Once you connect, you will see that the ID: COM section will turn Yellow indicating that all the drivers have been successfully installed.

• Click on “PDA” to select “TAR File” which you got after extracting the firmware file and then click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, the device will be rebooted automatically indicating that the firmware has been updated successfully.

• Once you see the home screen, disconnect the device and head over to the path “Settings > About Phone” where you will be able to see the firmware version as Jellybean 4.1.2 firmware XXBMA3.

Tip: Just in a rare case if the device doesn’t boot up or gets into the continuous Boot loop mode, you need to reinsert the battery and boot the device normally. Or else you need to re-apply the update by following the steps above.

Read more »

Download and Root Galaxy S3 GT I9305 on XXBMA3 Jellybean 4.1.2 Firmware

 

Procedure to Root Galaxy S3 GT I9305 on XXBMA3 Jellybean 4.1.2 Firmware:

• Download XXBMA3 Jellybean 4.1.2 Firmware Package from here to your computer which contains Odin as well. Once downloaded, extract both of the files in your computer and open Odin in your computer.

• Turn Off your device so that it can be entered in the Download Mode. Download mode in Galaxy S3 GT I9300 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the download mode.

• Connect your phone in the download mode to the computer while keeping Odin opened. Once you connect, you will see that the ID: COM section will turn Yellow indicating that all the drivers have been successfully installed. Also, in Odin ensure that Auto Reboot and F. Reset Time checkboxes are selected and no other options are

• Now, click on “PDA” to select “CF-Auto-Root-m3-m3zh-gti9305.tar.md5” and then click on “Start” to start the process of Rooting. Once the device is rooted, download the “ROOT CHECKER” app from the Google PLAY Store to check on whether the device is rooted or not. Just in case if the device is not rooted, you need to retry the process of rooting.

Tip: Just in a rare case if the device doesn’t boot up or gets into the continuous Boot loop mode, you need to reinsert the battery and boot the device normally. Or else you need to re-apply the update by following the steps above.

So there you go, you have now successfully rooted your Jellybean 4.1.2 XXBMA3 Firmware loaded Samsung Galaxy S3 I9305 smartphone. Do let us know in the comments section just in case if you face any issues so that we can assist you as soon as possible.

Read more »

Download and install - Update Galaxy S3 with Official Jellybean 4.1.2 XXELKC Firmware

 

Procedure to Update Galaxy S2 GT I9100 with the Latest Jellybean 4.1.2

• Download the Latest Jellybean 4.1.2 Firmware Package and Odin from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your Galaxy S3’s external SD Card.

• Once you have placed the zip file, disconnect the device and turn Off your phone so that it can be then entered in the Download Mode.

• The download mode in Galaxy S3 GT I9300 can be entered in recovery mode by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• Open Odin in your computer and connect your Galaxy S3 while it’s in the download mode with the computer and then you will see that after a minute the ID : COM section will turn Yellow indicating that all the drivers are successfully installed.

Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
        Install the USB Drivers in your computer &
        Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.

• Click on “PDA” to select “” the tar file and then select the option of “Start” for starting the process of firmware update. As soon as the update is applied successfully, you will see that the device will be rebooted.

• Please note that it may take more than 5 -6 minutes for applying the update and to reboot since it has to finalize all the app data etc. Once the device shows up the home screen, navigate to “Settings > About Phone” the current firmware version will be mentioned as Jellybean 4.1.2.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So, there you go, you have now successfully updated your device with the latest Jellybean XXELKC Firmware which ropes in the latest Jellybean 4.1.2 firmware.

Read more »

Download and install - Update Samsung Galaxy S3 I9300 Omega v33.2 Jellybean 4.1.2 Custom Firmware

 

Procedure to update Galaxy S3 GT I9300 with Omega v 33.2 Custom ROM firmware:

• Download the Omega v 33.2 Custom ROM Firmware Package from here to your computer. Once downloaded, connect your phone to the computer and place the zip file in your external sd card and not in your phone memory.

• Disconnect the device from computer and turn off your Galaxy S3 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Omega Custom ROM Firmware which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy S3 with the Omegas v33.2 custom ROM Firmware.

Read more »

Download and install - Update Galaxy S3 with Insert Coin Evolution 3.0 XXELK4 Jellybean 4.1.2 Firmware

 

Procedure to Update Galaxy S3 I9300 with Insert Coin Firmware:

• Download the Insert Coin Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place this zip file as it is in your device. Ensure that you are not placing the file deep into the sub folders.

• Once the zip file is placed, you now will have to download the ROM Manager app from the Google PLAY Store. You can either enter the device in recovery mode with the help of ROM Manager app or with the manual step which is mentioned below.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy S3.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Now, select “install zip from SD Card” to find for all the zip files present in your Galaxy S3 device, select the placed InsertCoin Custom ROM Firmware package to initiate the process of firmware update.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go, you have now successfully updated your Galaxy S3 with Jallybean based Insert Coin Firmware.

Read more »

Download and install - Update Galaxy S3 GT I9300 with Ultima ROM Jelybean 4.2 Custom ROM Firmware

 

 update

 

Procedure to Update Galaxy S3 with Ultima ROM Custom ROM Firmware:

• Download Ultima Custom ROM Firmware Package from here to your computer. Once downloaded, connect your Galaxy S3 to the computer with the help of original USB cable and then place the zip file in the external sd card.

• Once placed, disconnect the device from computer and open the ROM Manager app from the Apps list to select “reboot into recovery mode” so that the device can be booted in the recovery mode.

• Now In recovery mode, select “install zip from sd card” to choose the placed zip file of Ultima ROM from external SD Card. Once selected, confirm the same. It will take around 3 -5 minutes for applying the update. Once the update is applied successfully, the device will reboot. It may take more than 4 -5 minutes for rebooting the device.

• Once the device is booted, you will have to select the country and language options and then home screen will be shown.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode. If you get any force close errors you will have to select options Wipe data/factory reset” & “Wipe Cache partition” in the recovery mode.

Do let us know in the comments section below just in case if you face any issues as we will be more than happy to help you out.

Read more »

Download and install - Update Galaxy S3 GT I9300 with LG Nexus 4 Styled Codec ROM Firmware

 

 

Features of Codec ROM Nexus 4 Styled:

• Deodexed
• Zipaligned
• Rooted (CF SuperSU 0.97)
• BusyBox
• Call Record
• No SMS In Logs
• Disabled Scrolling Cache
• Extended Power Menu
• Aroma Installer (Custom Install) – Updated Aroma Installer to 2.56
• Modded Camera
• Build Prop Tweaks
• SQLite3
• Faster GPS Fix
• 761mb rom
• 15 Toggles (Choice)
• Silent Camera
• Disabled Increasing Ringtone In Phone
• Ad Blocking
• Removed Multiple Tones (low battery, usb connection etc)
• Centered clock on statusbar or stock
• Full GPU Acceleration in UI

Procedure to Update Galaxy S3 with Nexus 4 Loaded Apps Firmware Update:

• Download the Nexus 4 Styled Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.

• Now, disconnect the device and open the ROM Manager app in your phone so that it can be entered in the recovery mode. The recovery mode can also be entered with the below mentioned manual step.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy S3.

•  In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Now, select “install zip from SD Card” to find for all the zip files present in your Galaxy S3 device, select the placed Codec ROM LG Nexus 4 Custom ROM Firmware package to initiate the process of firmware update.

• As soon as the update is applied successfully, you will get to see the message of “install from sd card complete”. Now, it will take around 4 -5 minutes for booting the device as it’s the first time the device will be booting after applying the update. If you get any force close errors you will have to select options Wipe data/factory reset” & “Wipe Cache partition” in the recovery mode.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do let us know in the comments section below just in case if you face any issues as we will be more than happy to help you out. Congratulations, you have now successfully learnt on how you can easily apply the latest update of LG Nexus 4 styled codec ROM firmware in your device.

Read more »

Download and install - Update Galaxy S3 with Jellybean 4.1.2 Thunderbolt Custom ROM Firmware

 

Procedure to Update Galaxy S3 with Thunderbolt Custom ROM Firmware:

• Download the Thunderbolt Custom ROM Firmware from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.

• Once the zip file is placed, disconnect the device and turn off your Galaxy S3 smartphone so that it can be entered in the recovery mode. You can either enter your device in the recovery mode with the help of ROM Manager app or with the manual method which is mentioned below.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. Now, in the recovery mode you will have to select “Wipe data/factory reset” & “Wipe Cache partition” so that all the data can be cleared in the device.

• Now select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device. Once the zip file is selected, it will take around 4 -5 minutes for applying the update. Once the device is updated with the firmware, head over to the path “Settings > About Phone” where the firmware version will be mentioned as Thunderbolt Jellybean 4.2.1 firmware.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do let us know in the comments section below just in case if you face any issues as we will be more than happy to help you out. Congratulations, you have now successfully applied the update of Thunderbolt Jellybean 4.2.1 firmware in your Galaxy S3 smartphone.

Read more »

Download and install - Update Jellybean 4.1 Supreme Custom ROM Firmware for Galaxy S3 I9305

 

Procedure to Update Supreme Custom ROM Firmware in Galaxy S3 GT I9305:

• Download Supreme Custom ROM Firmware package from here to your computer. Once downloaded, connect your device to the computer and place the zip file in device’s external sd card.

• Disconnect the device and download the “ROM Manager” app from the Google PLAY Store and select the option of “Enter into Recovery Mode”. Alternatively, you can also enter your S3 in the recovery mode manually with the help of below mentioned step.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy S3.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Now, select “install zip from SD Card” to find for all the zip files present in your Galaxy S3 device, select the placed Supreme Custom ROM Firmware package to initiate the process of firmware update.

• As soon as the update is applied successfully, you will get to see the message of “install from sd card complete”. Now, it will take around 4 -5 minutes for booting the device as it’s the first time the device will be booting after applying the update.

Note: just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Read more »

Download and install - Update Jellybean 4.1 NxtGen Custom ROM Firmware for galaxy s3

 

Procedure to Update NxtGen Custom ROM firmware in your Galaxy S3 GT I9300:

• Download the latest NxtGen Custom ROM firmware Package from here to your computer. Once downloaded, connect your device to the computer with the original USB cable and place the zip file in your device’s internal memory.

• Once you have placed the file in your Galaxy S3, disconnect the device from computer and download the ROM Manager app from the Google PLAY Store. Now, select “reboot into recovery mode” for booting the device in the recovery mode. You can also enter the device into the recovery mode manually with the help of below mentioned step.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. Now, in the recovery mode you will have to select “Wipe data/factory reset” & “Wipe Cache partition” so that all the data can be cleared in the device.

• Select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device for installing the update. As soon as you apply the update, you will get to see that the firmware update process will be kick started. As soon as the update is applied successfully, you will see the message “install from sd card complete” at the bottom most part of the screen.

• Please note that it may take around 3 -4 minutes for applying the update. Once the device is booted, you then will have to follow the on screen instructions for setting up the device.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So once the device is booted, you will now need to follow the on screen options for setting up your device. So, there you go, you have now successfully learnt on how to apply this latest Nxt Gen custom ROM firmware for your Galaxy S3 smartphone. Do share with us in the comments section below just in case if you face any issues as we will try to fix the same at the earliest.

Read more »

Download and install - Update Galaxy S3 – Steps to Root on XXDLIH Jellybean 4.1 Firmware

 

Procedure to Root Galaxy S3 on XXDLIH Jellybean 4.1 Firmware:

• Download Odin and XXDLIH Rooting Package from here to your computer. Once downloaded, you now need to extract the rooting package and Odin in your computer.

• Open odin in your computer and turn off your phone so that it can be entered in the Download Mode.

• Download Mode in Galaxy S3 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. Refer below video on how to enter your Galaxy S3 in the Download Mode.

• Click on “PDA” to select “CF-Root-SGS3-v6.4.tar” and then click on “Start”. Once you click on start, it will take around 2 – 3 minutes for rooting the device. Please note that once the device is rooted, the device will be rebooted automatically.

• You can now disconnect the device and check whether the device is rooted or not. To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store. If your device is not rooted, you will have to follow the instructions mentioned above for rooting your Galaxy S3.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Video Tutorial of S3 Rooting

We just hope that by following the above mentioned procedure, you were able to root the device, just in case if you were not able to root, all you need to do is to just report to us in the comments section so that we can then take up in a priority manner. Congrats, you have now successfully rooted your Galaxy S3 and you are now ready to install custom ROM firmwares.

Read more »

Download and install - Update Galaxy s3 Root on XXDLIH Jellybean 4.1 Firmware

 

Procedure to Root Galaxy S3 on XXDLIH Jellybean 4.1 Firmware:

• Download Odin and XXDLIH Rooting Package from here to your computer. Once downloaded, you now need to extract the rooting package and Odin in your computer.

• Open odin in your computer and turn off your phone so that it can be entered in the Download Mode.

• Download Mode in Galaxy S3 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. Refer below video on how to enter your Galaxy S3 in the Download Mode.

• Click on “PDA” to select “CF-Root-SGS3-v6.4.tar” and then click on “Start”. Once you click on start, it will take around 2 – 3 minutes for rooting the device. Please note that once the device is rooted, the device will be rebooted automatically.

• You can now disconnect the device and check whether the device is rooted or not. To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store. If your device is not rooted, you will have to follow the instructions mentioned above for rooting your Galaxy S3.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

We just hope that by following the above mentioned procedure, you were able to root the device, just in case if you were not able to root, all you need to do is to just report to us in the comments section so that we can then take up in a priority manner. Congrats, you have now successfully rooted your Galaxy S3 and you are now ready to install custom ROM firmwares.

Read more »

Download and install - Update Verizon Wireless Galaxy S3 with ULE based Clean ROM Jellybean 4.1.1 Firmware

 

Procedure to Update VZW Galaxy S3 with Jellybean 4.1.1 Clean ROM Firmware:

• Download the VZW Galaxy S3 with Jellybean 4.1.1 Clean ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in the external sd card.

• Disconnect the device and turn off the device so that it can be entered in the recovery mode. Recovery mode in Galaxy S2 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.

• Alternatively, you can also enter the device into recovery mode with the help of ROM Manager app. Now, in recovery mode select “install zip from sd card” > “choose zip from internal sd card” and then choose the Android revolution custom ROM firmware Package

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

To check on whether the firmware has been successfully applied or not, all you need to do is to just head over to the path “Settings > About Phone” where in you can check the same on the firmware has been updated or not. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Read more »

Download and install - Update Galaxy S3 I9300 with Capon Mod Jellybean 4.1.2 Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 firmware based Capon ROM:

• Download the Capon ROM firmware zip Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place this zip file in your device’s external SD Card.

• Now, disconnect the Galaxy S3 connected to your computer and turn Off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” to select the Capon ROM Custom ROM Firmware Package which you have placed in your device. Once selected, it will take around 4 – 7 minutes for applying the update. As soon as the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode.

• For your phone to show the home screen, it might take longer than expected time as it is the first time after installing the firmware update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Capon Mod custom ROM.

Read more »

Download and install - Update Galaxy S3 I9300 with Capon Mod Jellybean 4.1.2 Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 firmware based Capon ROM:

• Download the Capon ROM firmware zip Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place this zip file in your device’s external SD Card.

• Now, disconnect the Galaxy S3 connected to your computer and turn Off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” to select the Capon ROM Custom ROM Firmware Package which you have placed in your device. Once selected, it will take around 4 – 7 minutes for applying the update. As soon as the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode.

• For your phone to show the home screen, it might take longer than expected time as it is the first time after installing the firmware update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Capon Mod custom ROM.
 

Read more »