Download-install and Update Samsung Galaxy ACE 2 with Kitkat 4.4.2 Firmware

 

Note: This update is the custom ROM firmware and not the official firmware from Samsung released.

Quick Pre-requisites:

      All data in your Samsung Galaxy ACE 2 must be secured using the steps mentioned below and not with the Samsung KIES, so as to ensure that the data be restored manually.

Go to the path "Settings> Applications> Development> USB Debugging" on your Samsung Galaxy ACE 2 to enable the USB debugging mode. Could charge batteries in the left device must have a minimum of 60% or other device to be getting off in the middle of firmware update.

      Since this is the custom ROM firmware, you must ensure that your phone is rooted. Download "Root Checker" app. Just in case, if the device is not rooted, it is imperative that the root of the device. You must also ensure that you are not under the backup using the ROM Manager app.

 Update process for Galaxy ACE 2 with Android 4.4.2 firmware Kitkat :

    Cyanogen Mod 11 Download firmware package and Google Apps Package from here to your computer. Once downloaded, you must have the same in your device to place the .
    Turn on the device so that it can be entered into the recovery mode .

    Press and hold Home + Power + Volume Up button to turn the device into recovery mode. If your Galaxy ACE 2 is in the normal mode , then you need to try again , the process of entering the device is in Recovery Mode . You can also enter the device in recovery mode by using the ROM Manager app.

    In recovery mode , select Clear data "and" to delete Wipe cache " the data and wipe the phone available in your cache.

    Once the data is deleted , select "install zip from SD card " and select the firmware ZIP file that you have provided in the device and then followed by the Google Apps package then . It will take about 4 to 5 minutes, until both of the zip files on the device.

    Once done , select "Back" and select the " Restart in normal mode " option for a device restart normally. Please note that it can sometime take longer than 3 -4 minutes to restart the device to normal mode .

    If you are getting all the force close error , restart the device back into recovery mode and then clear the cache and wipe the data , start the unit in the normal mode.

    Go to the path " Settings> Phone " to know the firmware version , the details are mentioned as KITKAT 4.4.2 .Note: If all Galaxy ACE 2 gets in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.Please let us know just in case if you ask any questions in the comments section . Alternatively, we will also come out with the custom ROM firmwares that will ensure that you make the most of it .

Read more »

Download and install - Update Galaxy ACE S5830 with Most Popular APOCALYPSE Custom ROM Firmware

 

• ICS-Style Settings Menu
• modded ICS Transparent Theme
• centered clock
• status bar supports transparency
• 50% trans-black lockscreen styles (sliding tabs, rotary, lens)
• bubble locksreen style by Team Carbon/Steel Blue Theme
• blue lockscreen buttons by Team Carbon/Steel Blue Theme
• contacts list image by Team Carbon/Steel Blue Theme
• usb mount image by Team Carbon/Steel Blue Theme
• sansation font  

 Procedure to Update Galaxy ACE S5830 with APOCALYPSE Custom ROM Firmware:

• Download the APOCALYPSE firmware package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the downloaded zip file in your Galaxy ACE.

• Once you have placed the same, turn off the device so that it can be entered in the recovery mode. To enter Galaxy ACE S5830 in the recovery mode, download the ROM Manager app and select the option of “reboot into recovery mode”.

• Once the device boots in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and select the APOCALYPSE Custom ROM Firmware package which you have placed in your device.

• Please note that once the file is selected, it will take around 4 – 5 minutes for applying this update and once it’s placed, you will need to select “Go Back”

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

So there you go you have now successfully updated your device with the latest APOCALYPSE custom ROM firmware. Do share with us in the comments section below just in case if you face any issues as we will try our level best to sort out the same. To check whether your phone is updated or not, head to the path “Settings > About Phone” where you will get to see the firmware as APOCALYPSE.

Read more »

Download and install - Update Galaxy ACE S5830 with Jellybean Styled Revolution Light Custom ROM

 

Procedure to Update Samsung Galaxy ACE S5830 with Revolution Light Custom ROM Firmware:

• Download the Revolution Custom ROM Firmware package from here to your computer. Once downloaded connect your device to the computer with the help of original USB cable and place the downloaded zip file in the internal memory of your device.

• Now, disconnect the device from computer and download the ROM Manager app from the Google PLAY Store. Open ROM Manager app and select the option of “FLASH Clock Work mod Recovery” so that the custom recovery image is flashed. Up next select “Reboot in Recovery Mode” for entering the device in the recovery mode.

• Once the device boots in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and select the Revolution Light Custom ROM Firmware which you have placed in your device.

• Please note that once the file is selected, it will take around 4 – 5 minutes for applying this update and once it’s placed, you will need to select “Go Back” and “reboot system now” for rebooting the device in the normal mode. It may take more than 6 – 7 minutes for booting the device sometimes, make sure that you are not interrupting while the device shows the Galaxy ACE Logo boot animation.

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt on how to update your Galaxy ACE S5830 with the latest Revolution Light Custom ROM Firmware.

Read more »

Download and install - Update Galaxy ACE S5830 with Koogly’s Mokee Custom ROM Firmware

 

 

How to Update Galaxy ACE S5830 with Koogly’s Mokee Custom ROM Firmware

Procedure to Update Galaxy ACE S5830 with Koogly’s Mokee Final Custom ROM Firmware:

• Download Koogly’s Mokee Final Custom ROM Firmware Package from here to your computer. Once placed, connect your device to the computer with the help of original USB cable and place the zip file in your device. Ensure that you are not placing the file deep into the device.

• Disconnect the device from computer once you finish placing the zip file in your computer.

• Download the “ROM Manager” app from the Google PLAY Store and install the same. Once installed, open the same and select the option of “FLASH Clock Work mod Recovery” so that the custom recovery image is flashed. Up next select “Reboot in Recovery Mode” for entering the device in the recovery mode.

• You can also enter Galaxy ACE in recovery mode, press and hold the Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and select the Koogly’s Mokee Final Custom ROM Firmware Package which you have placed in your device. Once the zip file is selected, it will take around 3 -4 minutes for applying the same.

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

So, there you go, you have now successfully applied the latest Koogly’s Mokee Final Custom ROM Firmware  in your Samsung Galaxy ACE S5830. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Read more »

Download and install - Update Galaxy ACE S5830i smartphone with MindCR Custom ROM Firmware

 

Procedure to Update Galaxy ACE S5830i with MindCr Rom V1.0.12 Custom ROM Firmware:

• Download the MindCr Rom V1.0.12 Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and

• The recovery mode in the Galaxy ACE S5830 can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the MindCr Rom V1.0.12 Custom ROM Firmware Package which is placed in the phone.

• Once the file is selected, it will take 4 -5 minutes for applying this update. Once the update is applied, the device will land back to the recovery mode screen, in recovery mode screen select “reboot system now” by selecting “Go back” option with the help of Volume keys and power button.

Tip: If your Galaxy ACE S5830i doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.
To check on whether the firmware is updated or not, navigate to the path “Settings > About Phone” where you can check out the current firmware version. So there you go, you have now successfully applied the update of MindCr Rom V1.0.12 Custom ROM Firmware in your phone. Do let us know in the comments section just in case if you need any assistance on the same in the comments section below.

Read more »

Download and install - Update Galaxy ACE S5830i with Simplicity Custom ROM Firmware

 

Procedure to Update Galaxy ACE S5830i with Simplicity Custom ROM Firmware:

• Download Simplicity Firmware Package from here to your computer. Once downloaded, connect your Samsung Galaxy ACE 5830i with the computer and place this file in your device.

• After placing the files, disconnect the Galaxy ACE 5830i device and turn off the device so that it can be entered in the recovery mode. Ensure that you haven’t placed the zip file deep into the sub folders.

• The recovery mode in the Galaxy ACE S5830i can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode. You can also enter the device in the recovery mode from the “ROM Manager” app which you can download from the Google PLAY Store.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Simplicity Firmware Package which you have placed in the phone. Once the file is selected, it will take around 4 -5 minutes for applying the same. Please note that it will take more than normal time for rebooting the device for the first time. Just in case if the device refuses to boot up, all you need to do is to just enter the device in the recovery mode and wipe all the cache and data from the recovery mode.

Once it’s done, the device will be restarted and bingo there you go, you have now successfully learnt on how to apply this Gingerbread based Simplicity custom ROM firmware in your device. Do let us know in the comments section below just in case if you face any issues as we will be more than happy t help you out.

Read more »

Download and install - update Galaxy ACE S5830 with S3 Looking TouchWiz 5.0 Powered CM 7.2 Firmware

 

How to Update Galaxy ACE S5830 with S3 mod TouchWiz 5.0 Powered CM 7.2 Firmware

Procedure to Update Samsung Galaxy ACE S5830 with the latest Cyanogen MOD 7.2 Styled SGS 3 TW5 Firmware:

• Download the CM 7.2 – SIII MOD v2 Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the downloaded zip file in your device. Once copied, disconnect the device from the computer.

• Download the “ROM Manager” app from the Google PLAY Store and install the same. Once installed, open the same and select the option of “Reboot in Recovery Mode” for entering the device in the recovery mode. For manually entering the device in recovery mode, press and hold the Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the CM 7.2 – SIII MOD v2 Package file which is placed in the phone. Once selected, it will take round about 5 -6 minutes for applying this update.

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

Do share with us in the comments section just in case if you face any issues in the comments section as we will try our level best to sort out the same. Congrats, you have now successfully applied the update of CM 7.2 – SIII MOD v2 in your Galaxy ACE S5830.

Read more »

Download and install - update Samsung Galaxy ACE S5830i with Retribution Custom ROM Firmware

 

Features of Retribution Custom ROM Firmware:

• Based on XXLA2
• 30-Volume Step Mod
• Smooth Scroll Mod
• Build.prop tweaks
• Flash Player pre-included
• Beats Audio Mod pre-included
• Updated libs and modules for better perfomance
• completely ad-free

How to Update Samsung Galaxy ACE S5830i with Retribution Custom ROM Firmware

Procedure to update Retribution Custom ROM Firmware in your Galaxy ACE S5830i:

• Before proceeding, ensure that your Galaxy ACE S5830i is rooted, if its not rooted then you will have to root the same. To check on whether the device is rooted or not, you can download “Root Checker” app from the Google PLAY Store.

• Download Retribution Custom ROM Firmware package from here to your computer. Once downloaded, connect your phone to the computer and place this zip file in your device. Ensure that you are not placing the file deep into the device.

• Once the file is copied, you now need to disconnect the device and turn Off the phone so that it can be entered in the recovery mode.

• The recovery mode in the Galaxy ACE S5830i can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Retribution Custom ROM Firmware Zip file which is placed in the phone.

• Once the file is selected, it will take 4 -5 minutes for applying this update. Once the update is applied, the device will land back to the recovery mode screen, in recovery mode screen select “reboot system now” by selecting “Go back” option with the help of Volume keys and power button. It will take more than usual time for rebooting the device.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go, you have now successfully applied the latest update of Retribution Custom ROM Firmware in your Galaxy ACE S5830i. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Read more »

Download and install CyanogenMod 10 for Galaxy Ace

What’s Not Working in this CyanogenMod 10 ROM For Galaxy Ace

• As it’s in initial process, so some bugs are there.
• Microphone is not working properly.
• Camera and headphones are not working properly.
• There are some bugs in playing FM.
• Native Android app2sd

How to Install CyanogenMod 10 (CM10) Android 4.1.1 Jelly Bean ROM on the Galaxy Ace

• The process may result in losing all of your data like apps, messages, contacts etc. So first of all take back up of all data to work risk-free.
• Uninstall the antivirus from device (if any).
• Don’t let the power of the device to create any problem for you. So keep your device charged at least 50 percent.
• Install ClockworkMod recovery on your phone.
• Download the ROM from here and make sure to save it on your internal SD card.
• Press the Home + Power and boot the phone into ClockWorkMod recovery.
• You can press the volume up and down buttons to scroll in the options and power button to make the selection.
• Now select the ‘Install Zip From SD Card‘ option and select the .zip file of the CyanogenMod 10 ROM from your device’s SD card. You will need to confirm your selection right after that.
• Again select - ’Install Zip From SD Card‘ and then install up the .zip file of the Google Apps Package.
• Now select – ‘++++ Go Back ++++’ and then select – ‘Reboot System Now’ to restart the phone.
• Your Samsung Galaxy Ace will now be running on this CM 10 based on Android 4.1.1 Jelly Bean firmware.

That’s it. Quite simple. Isn’t it? Facing any problem? We are here to help you. Just do let us know your problem in the comment box below.

Read more »

Root Samsung Galaxy ACE S5830 on Gingerbread 2.3.6 DDKQ8 Firmware

 

How to Root Samsung Galaxy ACE S5830 on Gingerbread 2.3.6 DDKQ8 Firmware

Procedure to Root Samsung Galaxy ACE S5830 on DDKQ8 Gingerbread 2.3.6 Firmware:

• Download the DDKQ8 Gingerbread 2.3.6 Rooting Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB Cable and place the zip file in the SD Card or in internal memory.

• Once placed, disconnect the device and turn off the device so that it can be entered in the recovery mode. The recovery mode in your Galaxy ACE S5830 can be entered by pressing  Volume Up Key + OK button, and holding both simultaneously press the Power Button. You can refer the below mentioned video on how you can enter into the recovery mode.

• In recovery mode, you need to choose “install zip from sd card” and select the zip file which you have placed in your device. Once it’s done, it will take around 4 – 5 minutes for applying the same.

• Once it’s rooted, you can check the same whether the phone is rooted or not by downloading the app called “Root Checker” which can be downloaded from the Google PLAY Store. Open the root checker app and check the same, if it’s rooted then it will show as rooted.

Note: if the device gets in the boot loop sequence or say gets stuck on the Samsung Logo, you need to long press the power button to turn off and then restart the process of applying this rooting process.

So, in this way you have successfully learnt on how you can easily root your Samsung Galaxy Ace. Do let us know just in case if you face any issues as we will try our level best to sort out the same.

Read more »