Online

Wednesday, October 24, 2012

Download and install - Update Galaxy S3 with Official Jellybean 4.1.1 XXDLIH Firmware


 Jellybean 4.1 Logo
Procedure to Update Galaxy S3 GT I9300 with XXDLIH Jellybean 4.1.1 Firmware:
  • Once extracted, open Odin and turn off your Galaxy S3 so that it can be entered in the download mode. Download Mode can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. You can refer to the below mentioned video to know more on how to enter the device in the download mode.
  • In download mode, connect your device to the computer with the help of original USB cable and click on “PDA” in Odin to select the tar file which you got after extracting the XXDLIH firmware. Ensure that the ID : COM section in Odin has turned yellow or else the firmware can’t be applied.
  • Once you click on Start, you will see a progress bar which will indicate the progress of the firmware update in your Galaxy S3. It will take round about 5 – 8 minutes for applying the update. As soon as the firmware is update, you will see the home screen in your computer.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Official jellybean 4.1.1 XXDLIH firmware.

0 yorum:

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | belt buckles
Design Downloaded from Free Blogger Templates | Free Website Templates