Download and install - Update Sprint Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware

 

How to Update Sprint Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware

Procedure to Update Samsung Galaxy S3 SPH L710 with Jellybean 4.1.1 Firmware:

• Download Firmware Package from here to your computer.
• Odex
  SPRINT JELLY BEAN LEAK
  MD5: 45BA4316C4A32788194C0B04ED7E5BFC
  
  DeOdex
  SPRINT JELLY BEAN LEAK
  MD5: 4B571B05D41D2F589BAFF84E27C0DD3F
  
  LIF Firmware:
  LIF Firmware/modem/baseband update
  
  Changelog:
  9/30/12:
  -Added Jelly Bean boot animation
  -Modified kernel to adb shell @ root, bootanimation support, and a few other tweaks.
  -Fixed root. 
•  Once you have downloaded in your computer, place the same in the external micro SD Card of your Galaxy S3 smartphone.

• Disconnect the device from computer and turn off your computer so that you can then enter your phone in the recovery mode. Recovery mode can be entered by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.
• In recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the Jellybean firmware Package which you have placed in your phone. Once it’s selected, it will take around 4 -5 minutes for applying the update. Also, note that it may take longer time than the normal time for the first reboot.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

To check on whether the firmware has been successfully applied or not, all you need to do is to just head over to the path “Settings > About Phone” where in you can check the same on the firmware has been updated or not where you will get the firmware version as Jellybean 4.1.1 update.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Very soon there will be many more Jellybean 4.1.1 firmwares which will be rolled out which too will be covered here.

•  xda