Download and install - Update Galaxy ACE S5830 with Official Value Pack XWKTQ Gingerbread 2.3.6 Firmware

 

Procedure to Update Galaxy ACE S5830 with Value Pack Gingerbread 2.3.6 Firmware:

• Download Odin + OPS and XWKTQ Value Pack Gingerbread 2.3.6 Firmware Package from here to your computer. Once downloaded, extract both the files and open Odin in your computer.

• The download mode in Galaxy ACE S5830 can be entered by pressing down on Volume Down Key + OK button, and holding both simultaneously press the Power Button. If device boots up in normal mode, then you need to again try entering the device in the download mode.

• Once the device is booted in the download mode, connect your phone to the computer with the help of original USB cable. Assuming that Odin is opened, you will see that the ID : COM section in your Odin turns Yellow which will indicate that all the drivers have been installed successfully.

• Now, all you need to do is to just click on “OPS” tab to select “Cooper_v1.0.ops”, tick mark on “One package” option. Up next, you will have to select the file “S5830XWKTQ_S5830XWKT8_S5830FRELT2_HOME.tar.md5” by clicking on “One Package” tab. Once you have selected the files, click on “Start” to start the process of firmware update. As soon as the firmware is applied successfully, the device will be rebooted.

Note: If the Odin gives error at param.fs or say at any point then you will have to reboot your computer and try applying the process from the start. Ensure that you have installed all the latest possible drivers of your phone. Also, KIES should be the latest version.

Do let us know in the comments section if you face any issues as we will try our level best to fix the same.  Congratulations, you have now successfully applied the update of Value Pack Gingerbread 2.3.6 Firmware which is dubbed as XWKTQ.