Download and install - Update Galaxy S3 with Jellybean 4.1.1 based Turkbey Custom ROM firmware

 

Procedure to Update Galaxy S3 with the Turkbey Custom ROM Firmware:

• Download the Turkbey Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and move the zip file to your external SD card which is there in your Galaxy S3 device.

• Don’t place the zip file in the internal memory of your S3 as it won’t detect the zip package. After placing the file, disconnect the device and turn off the same so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Turkbey Custom ROM Firmware which you have placed in your phone. Once it’s selected, it will take around 4 -5 minutes for applying the update. As soon as the update is applied, you will be needing to enter the Google Account settings along with other settings which you can find in the below mentioned video.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go, you have now successfully applied the latest Turkbey custom ROM firmware in your Samsung Galaxy S3 GT I9300 smartphone.