Download and install - Update Galaxy ACE S5830 with Jellybean Styled Revolution Light Custom ROM

 

Procedure to Update Samsung Galaxy ACE S5830 with Revolution Light Custom ROM Firmware:

• Download the Revolution Custom ROM Firmware package from here to your computer. Once downloaded connect your device to the computer with the help of original USB cable and place the downloaded zip file in the internal memory of your device.

• Now, disconnect the device from computer and download the ROM Manager app from the Google PLAY Store. Open ROM Manager app and select the option of “FLASH Clock Work mod Recovery” so that the custom recovery image is flashed. Up next select “Reboot in Recovery Mode” for entering the device in the recovery mode.

• Once the device boots in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and select the Revolution Light Custom ROM Firmware which you have placed in your device.

• Please note that once the file is selected, it will take around 4 – 5 minutes for applying this update and once it’s placed, you will need to select “Go Back” and “reboot system now” for rebooting the device in the normal mode. It may take more than 6 – 7 minutes for booting the device sometimes, make sure that you are not interrupting while the device shows the Galaxy ACE Logo boot animation.

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully learnt on how to update your Galaxy ACE S5830 with the latest Revolution Light Custom ROM Firmware.

Read more »

Download and install - Update Galaxy S I9000 with Paranoid Jellybean 4.1 Custom ROM Firmware

 

Procedure to Update Galaxy S GT I9000 with Paranoid custom ROM Firmware:

• Download the Paranoid Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the Paranoid Custom ROM Firmware Package in your device.

• Disconnect the device from computer and turn off your Galaxy S GT I9000 so that it can be entered in the recovery mode. Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Now in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the Paranoid Custom ROM Firmware Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• As soon as the update is applied select “Go Back” and select “reboot system now” for rebooting the device. Please note that it may take longer than expected time for rebooting the device since it’s a first time the device is being booted up after firmware installation.

• To check on whether firmware has been updated successfully or not, head over to the path “Settings > About Phone” where you will get to see the firmware version as “Paranoid Custom ROM Firmware” based on the latest Jellybean 4.1.2 firmware.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S GT I9000 with the latest firmware of Paranoid version.

Read more »

Download and install - Update Galaxy S PLUS GT I9001 with Official Value Pack Gingerbread 2.3.6 XXKQD Firmware

 

Procedure to Update Galaxy S PLUS GT I9001 with Value Pack Gingerbread 2.3.6 XXKQD firmware:

• Download Odin and Value Pack Gingerbread 2.3.6 XXKQD firmware Package from here to your computer. Once downloaded, extract both the zip files and open Odin in your computer.

• Turn Off your phone so that it can be entered in the download mode. Download Mode in Galaxy S PLUS GT I9001 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off.

• If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. Connect your device to the computer with the help of original USB cable which you got with the phone and once you connect it will install all the required drivers and then the ID : COM section will turn Yellow which will indicate that all the drivers are installed and you are ready to proceed to the next step.

• Click on “PDA” to select “I9001XXKQD_I9001ODDKP5_I9001DDKP9_HOME.tar.md5” and simple click on “Start” to start the process of firmware update. It will take around 4 -5 minutes for applying the update, once the firmware is updated, the Galaxy S PLUS GT I9001 will reboot automatically. Once you see the home screen, disconnect the device and configure the prompted settings.

• You may now be prompted to enter the Google Account details and Country selector with the Language preference, make sure that you have an active data connection.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. To check on whether the firmware has been updated or not, tap on Menu Key > Settings > About Phone where you will get to see the firmware version as Value Pack Gingerbread 2.3.6 XXKQD firmware.

Read more »

Download and install - Update Galaxy S GT I9000 with Jellybean 4.1.2 Codename Android Firmware

 

Procedure to update Galaxy S I9000 with Codename Android 4.1.2 Firmware:

• Download the Google Apps Package and Codename Android 4.1.2 Firmware from here to your computer. Once downloaded, connect your device to the computer and place these two zip files in your internal SD Card. Ensure that you are not placing the file deep into the sub folders.

• Disconnect the device and turn off your phone so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Now, in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the Codename Android Custom ROM Firmware and Google Apps Package. It will take around 4 -5 minutes for applying the update.

• Once you see the “install from sd card complete” message on screen, select “Go Back” and select “reboot system now” for rebooting the device in the normal mode. To check whether the firmware is updated or not, head over to the path “Settings > About Phone” where you will find the current firmware version.

Note: just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Alternatively, you can also head over to the source witht he help of below mentioned link.

Read more »

Download and install - Update Galaxy R I9103 with CM 10 Jellybean 4.1.2 Firmware

 

Procedure to Update Galaxy R I9103 with CM 10 Jellybean 4.1.2 based Firmware:

• Download the CM 10 Jellybean 4.1.2 firmware package and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the two downloaded zip files in your Galaxy R, ensure that you are not placing the file deep into the device as it may not get detected in the recovery mode.

• Turn Off your Samsung Galaxy R I9103 so that it can be entered in the Recovery mode. The recovery mode can be entered by “Pressing Volume Up key+ Menu Key + Power ON the device”. Once you enter into the recovery mode, you need to select “Wipe data/factory reset” & “Wipe Cache partition” so that this will clear the cache in your device.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” after which you need to select the CM 10 Firmware Package which you have placed in your device and then select the Google Apps Package. Please note that once the files are selected, it will take around 5 -6 minutes for applying the update.

• Once the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode. Please note that it may take longer time than expected for rebooting the device as it’s the first time the device is being rebooted after updating the firmware.

Note: If your Galaxy R refuses to boot or gets in the boot loop mode, you need to re insert the battery and turn ON the device normally. You can also re apply the update by following the above mentioned steps.

Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go, you have now successfully learnt on how to apply with the latest unofficial Cyanogen Mod 10 Firmware in your Galaxy R I9103 which ropes in the goodness of Jellybean 4.1.2 firmware.

Read more »

Download and install - Update samsung Galaxy S 4G with Paranoid Custom ROM Firmware

 

Procedure to Update Samsung Galaxy S 4G with latest Paranoid tablet based custom ROM firmware:

• Download the Paranoid tablet based custom ROM firmware package and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable.

• Place the zip files in your phone, ensure that you are not placing the file deep into the device as it may not get detected in the recovery mode. After placing the file, disconnect the phone from computer and turn off the same so that it can be entered in the recovery mode.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Samsung Galaxy S 4G .

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware. Now, in the recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the paranoid Custom ROM Firmware package and Google Apps Package which you have placed in the device. Once selected, it will take round about 4 – 5 minutes for applying the update.

• Once the update is applied successfully, you will now need to select “go back” and select the option of reboot system now. Once the device is booted successfully, you can see that the device is updated with this latest paranoid custom rom firmware.

Note: If at all your Samsung Galaxy S 4G gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go you have now successfully learnt on how you can apply this Paranoid custom ROM firmware which is very high on the features list.

Read more »

Download and install - Update Galaxy S3 I9300 with Capon Mod Jellybean 4.1.2 Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 firmware based Capon ROM:

• Download the Capon ROM firmware zip Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place this zip file in your device’s external SD Card.

• Now, disconnect the Galaxy S3 connected to your computer and turn Off your device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” to select the Capon ROM Custom ROM Firmware Package which you have placed in your device. Once selected, it will take around 4 – 7 minutes for applying the update. As soon as the update is applied successfully, select “go back” and “reboot system now” for rebooting the device in the normal mode.

• For your phone to show the home screen, it might take longer than expected time as it is the first time after installing the firmware update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Capon Mod custom ROM.
 

Read more »

Download and install - Update Galaxy S3 with Official Jellybean 4.1.1 XXDLIH Firmware

 

Procedure to Update Galaxy S3 GT I9300 with XXDLIH Jellybean 4.1.1 Firmware:

• Download the XXDLIH Jellybean 4.1.1 Firmware package and Odin from here to your computer. Once downloaded, extract the files in your computer.

• Once extracted, open Odin and turn off your Galaxy S3 so that it can be entered in the download mode. Download Mode can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode. You can refer to the below mentioned video to know more on how to enter the device in the download mode.

• In download mode, connect your device to the computer with the help of original USB cable and click on “PDA” in Odin to select the tar file which you got after extracting the XXDLIH firmware. Ensure that the ID : COM section in Odin has turned yellow or else the firmware can’t be applied.

• Once you click on Start, you will see a progress bar which will indicate the progress of the firmware update in your Galaxy S3. It will take round about 5 – 8 minutes for applying the update. As soon as the firmware is update, you will see the home screen in your computer.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Samsung Galaxy S3 GT I9300 with the Official jellybean 4.1.1 XXDLIH firmware.

Read more »

Download and install - Update Galaxy R I9103 with Official ICS Android 4.0.4 Firmware

 

Procedure to Update Galaxy R I9103 with Official ICS XWLP2 Android 4.0.4 Firmware:

• Download the XWLP2 ICS 4.0.4 Firmware Package and Odin from here to your computer. Once downloaded, extract both the zip files preferably to your desktop and Open ODIN in your computer.

• Up next, turn off your Galaxy R I9103 device so that it can be entered in the download mode. Download Mode in Galaxy R I9103 can be entered by pressing the Volume Down rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.

• Once the device enters in the Download Mode, connect your device to the computer with the help of original USB cable and click on “PDA” in Odin to select the tar file which you got after extracting the XWLP2 firmware. Ensure that the ID : COM section in Odin has turned yellow or else the firmware can’t be applied.

• Click on “Start” for starting the process of firmware update. As soon as the firmware is updated successfully, the Galaxy R will be rebooted. It will take around 4 – 5 minutes for rebooting the device. Please note that it may take longer time than expected for applying the update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the update of Official ICS Android 4.0.4 firmware in your Galaxy R I9103 which you can check the same from the path “Settings > About Phone > Firmware Version”.

Read more »

Download and install - Update Galaxy S3 GT I9300 with XXDLIJ Jellybean 4.1.1 WanamLite ICS Custom ROM Firmware

 

Procedure to Update Galaxy S3 GT I9300 with XXDLIJ Jellybean 4.1.1 WanamLite ICS Custom ROM Firmware:

• Download the WanamLite Custom ROM firmware package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and then place the downloaded zip file in your phone.

• Once placed, disconnect the phone and turn off the device so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S III GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button).

• While holding these both buttons, turn ON your device. In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• Select “install zip from sd card” > “choose zip from internal sd card” and then select the “Wanam lite Custom ROM Firmware Zip File”. Once you have selected the file, it will take around 3 – 4 minutes for applying the same.

• It may take 2 – 3 minutes for turning ON the device and for showing the language selection and country selection options since it’s the first boot after the firmware update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Once you see the home screen, get over to the path “Settings > About Phone” where you will get to see the firmware version as Wanam Lite custom ROM firmware. Do leave a comment below if you come across with any of the unusual thing about this Wanam Lite custom ROM firmware.

Read more »

Download and install - Update Galaxy ACE S5830 with Official Value Pack XWKTQ Gingerbread 2.3.6 Firmware

 

Procedure to Update Galaxy ACE S5830 with Value Pack Gingerbread 2.3.6 Firmware:

• Download Odin + OPS and XWKTQ Value Pack Gingerbread 2.3.6 Firmware Package from here to your computer. Once downloaded, extract both the files and open Odin in your computer.

• The download mode in Galaxy ACE S5830 can be entered by pressing down on Volume Down Key + OK button, and holding both simultaneously press the Power Button. If device boots up in normal mode, then you need to again try entering the device in the download mode.

• Once the device is booted in the download mode, connect your phone to the computer with the help of original USB cable. Assuming that Odin is opened, you will see that the ID : COM section in your Odin turns Yellow which will indicate that all the drivers have been installed successfully.

• Now, all you need to do is to just click on “OPS” tab to select “Cooper_v1.0.ops”, tick mark on “One package” option. Up next, you will have to select the file “S5830XWKTQ_S5830XWKT8_S5830FRELT2_HOME.tar.md5” by clicking on “One Package” tab. Once you have selected the files, click on “Start” to start the process of firmware update. As soon as the firmware is applied successfully, the device will be rebooted.

Note: If the Odin gives error at param.fs or say at any point then you will have to reboot your computer and try applying the process from the start. Ensure that you have installed all the latest possible drivers of your phone. Also, KIES should be the latest version.

Do let us know in the comments section if you face any issues as we will try our level best to fix the same.  Congratulations, you have now successfully applied the update of Value Pack Gingerbread 2.3.6 Firmware which is dubbed as XWKTQ.

Read more »

Download and install - Update Galaxy Note 2 with Android Revolution HD Custom Firmware

 

Procedure to Update Galaxy Note 2 with XXALJ3 Jellybean 4.1.1 Android Revolution Custom ROM Firmware:

• Download the Galaxy Note 2 with XXALJ3 Jellybean 4.1.1 Android Revolution Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in the external SD Card.

• Once the zip file is copied, disconnect the phone and turn Off the device so that it can be entered in the recovery mode.

• Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy Note 2 N7100.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.

• After this, select “install zip from sd card” > “choose zip from sd card” and then choose the Omega Custom ROM Firmware Package which you have placed in your Galaxy Note 2 N7100 smartphone.

• It will take around 4 -5 minutes for applying the update, as soon as the update is applied, select “go back” and then choose the option of “reboot system now” for rebooting the device. Please be informed that for the 1^st reboot it may take longer time than expected.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Congratulations, you have now successfully learnt on how to apply this XXALJ3 Jellybean 4.1.1 based Android Revolution Custom ROM firmware. Do let us know in the comments section just in case if you face any issues in the process of applying this firmware update.

Read more »

Download and install - Update Galaxy S3 GT I9300 with Jellybean 4.1 based Dragon ROM

 

Procedure to Update Galaxy S3 GT I9300 with Dragon Custom ROM Firmware:

• Download the latest Dragon Custom ROM Firmware which is based on the Jellybean 4.1.1 firmware in your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place this zip file in the external SD Card.

• Once you have placed the zip file, disconnect the device from computer and turn off your phone so that it can be entered in the recovery mode.

• In recovery mode, select “install zip from sd card” > “choose zip from sd card” and then choose the Dragon Custom ROM Firmware package which you have placed in the. As soon as the update is applied, it will take around 3 -5 minutes for applying the update.

• Once the firmware is updated successfully, the device will be rebooted and you will be prompted to enter the Google Account and Wi Fi Settings. Please note that if you face any force close errors, start your phone in recovery mode to select “Wipe data/factory reset” & “Wipe Cache partition” and then select “advanced” and clear the Dalvik cache.

• To check on whether the firmware has been updated or not, you can navigate to the path “Settings > About Phone” where the current firmware version will be shown as XXDLIB based Dragon custom ROM Firmware

Note: If at all your Samsung Galaxy S3 GT I9300 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go you have now successfully learnt on how you can apply this Dragon custom ROM firmware which is very high on the features list.

Read more »

Download and install - Update Samsung Galaxy S3 I9300 Omega v27.2 Jellybean 4.1.1 Custom Firmware

 

Procedure to update Galaxy S3 GT I9300 with Omega v 27.2 Custom ROM firmware:

• Download the Omega v 27.2 Custom ROM Firmware Package from here to your computer. Once downloaded, connect your phone to the computer and place the zip file in your external sd card and not in your phone memory.

• Disconnect the device from computer and turn off your Galaxy S3 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Omega Custom ROM Firmware which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy S3 with the Omegas v27.2 custom ROM Firmware.

Read more »

Download and install - Update Galaxy S2 GT I9100 Thebyani Jellybean 4.1.1 Firmware

 

 

 

 

Procedure to Update Galaxy S2 GT I9100 with Thebyani custom ROM Firmware:

• Download the Thebyani custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the same in your device.

• Ensure that you are not placing the file deep into the device. Once the file is placed, disconnect the phone from computer and turn off the device from computer so that it can be entered in the recovery mode.

• Recovery mode in Galaxy S3 GT I9100 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app which can be downloaded from the Google PLAY Store.

• Now, select “Go Back” and select “install zip from sd card” > “choose zip from internal sd card” and then choose the Thebyani custom ROM Firmware Package which you have placed in your phone.

• Once you select the firmware update zip package, you will have to wait for the same to finish the update process. As soon as the update is applied, select “Go Back” and select the “reboot system now” for rebooting the Galaxy S2.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go you have now successfully applied the update of Thebyani custom ROM firmware based on Jellybean 4.1.1 firmware update.

Read more »

Download and install - Update Galaxy ACE S5830 with Droid ACE v2.1 Firmware

 

How to Update Galaxy ACE S5830 with Droid ACE v2.1 Firmware

Procedure to Update Samsung Galaxy ACE S5830 with Droid ACE CM 7.2 firmware:

• Download Galaxy ACE S5830-S3 Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer and then place the downloaded zip file in your device’s internal memory.

• Once the file is copied, you now need to disconnect the device and turn Off the phone so that it can be entered in the recovery mode.

• The recovery mode in the Galaxy ACE S5830 can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Cyanogen Mod 7.2 Firmware Zip file which is placed in the phone.

• Once the file is selected, it will take 4 -5 minutes for applying this update. Once the update is applied, the device will land back to the recovery mode screen, in recovery mode screen select “reboot system now” by selecting “Go back” option with the help of Volume keys and power button.

Tip: If your Galaxy ACE doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.

Do let us know in the comments section below just in case if you face any issue in updating your Galaxy ACE. You have successfully applied the update of Cyanogen Mod 7.2 Firmware in your device.

Read more »

Download and install - Update Galaxy SL I9003 with S3 Styled REMICS v1.7 ICS Custom ROM Firmware

 

   

Procedure to Update Galaxy SL I9003 with remics ICS Custom ROM Firmware:

• Download the Remics Custom ROM Firmware Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and then place the zip file in your device. Disconnect the device and turn off the phone so that it can be entered in recovery mode. The recovery mode can be entered by pressing the Volume Down Key + OK button, and holding both simultaneously press the Power Button.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Remics Custom ROM Firmware Package which is placed in the phone. It will take around 3 – 4 minutes for applying the update. Also, you will see that the device might just stay on the S Logo for more than 3 -4 minutes.

• Once the update process is completed, the device will again land back to the recovery screen. In the recovery screen, select “++++ Go Back ++++” and then choose the option of “reboot system now” for rebooting the system. If in any case if you come across the force close errors then all you need to do is to just enter the device in the recovery mode and wipe all the cache data as well as wipe all the data present in your device.

Tip: Just in case if due to some reasons if the update process gets failed or interrupted, then you need to apply the update again by following the steps again from the start. Don’t forget to restore the backup which you have taken in the initial steps.

So there you go, you have now successfully installed the latest firmware update of Remics in your device. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Read more »

Download and install - Update Galaxy S GT I9000 Super Stable Jellybean 4.1.1 Firmware

 

Procedure to update Galaxy S GT I9000 with the Latest Jellybean 4.1.1 Firmware Update:

• Download Google Apps Package and Jellybean 4.1.1 Firmware package from here to your computer. Once downloaded, place these two zip files in your Galaxy S’s internal memory.

• Disconnect the phone and simply turn off the device so that it can be entered in the recovery mode. Samsung Galaxy S can be entered in the recovery mode by pressing the Volume Up Key, Center button, and holding both simultaneously press the Power Button.

• In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition which will clear out all the cache data present in your device, if you skip this step then you may face issues like force close issues in your phone.

• Select “install zip from sd card” > “choose zip from sd card” and then choose the Jellybean 4.1.1 firmware package and then the Google Apps Package to select “Yes” with the help of Volume rocker keys and Menu button. Once the file is selected, it will take around 5 – 7 minutes for applying the same. Once the update is applied, select “go back” and then “reboot system now”.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section so that just in case if you face any issues faced in the process of applying this update as we will try our level best to sort out the same. Congratulations, you can check the firmware version from the path “Settings > About Phone”.

Read more »

Samsung Galaxy Nexus Android 4.1.2 OTA Update

 

Here comes good news for the unlocked Galaxy Nexus GSM owner as Google has pushed the Android 4.1.2 update to the device starting from today.

How to Update
Android 4.1.2 to the GSM Galaxy Nexus owner is pushed via Over the Air update and the file size of this update is not too large but still it’s recommended that you should update while you are connected to a WI Fi network in your area. Many users have received the update notification on their device and if you have received such, you just need to follow the onscreen instructions to apply the updates to Android 4.1.2. Your phone will be restarted automatically and you will see the Android 4.1.2 new features added.
Alternatively if you have not received the update notification then you should check for the update manually. One can proceed to Settings > About Phone > Software Update and then tap on Check Now to know whether update is available or not. Your phone then will be connected to the Google server and reply will soon come down. Once the message is received, you need to tap on Download. Once the files are downloaded, you will be prompted to Install the updates. Your phone will be restarted automatically and the updates will be applied. Make sure that for the first time on Android 4.1.2 booting period will be little longer.
GSM Galaxy Nexus owner have got this update, do you see this on your device? Do let us know what you feel about the same via the comments included below.

Read more »

Download and install - Update Galaxy S2 GT I9100 with RootBox Jellybean 4.1.2 Firmware

 

How to Update Galaxy S2 GT I9100 with RootBox Jellybean 4.1.2 Firmware

Procedure to Update Galaxy S2 GT I9100 with Root Box Jellybean 4.1.2 Firmware:

• Download the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the 2 downloaded zip files in your device.

• Disconnect the device from computer and turn off your Galaxy S2 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy S2 GT I9100 with the latest Jellybean 4.1.2 Firmware.

Read more »

Download and install - Update Galaxy S3 GT I9300 with Root Box Jellybean 4.1.2 Firmware

 

How to Update Galaxy S3 GT I9300 with Root Box Jellybean 4.1.2 Firmware

Procedure to Update Galaxy S3 GT I9300 with Jellybean 4.1.2 Firmware:

• Download the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the 2 downloaded zip files in your device.

• Disconnect the device from computer and turn off your Galaxy S3 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.

• Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Root Box Jellybean 4.1.2 Custom ROM Firmware and Google APPS Package which you have placed in your phone. It will take around 4 -5 minutes for applying the update.

• Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy Nexus I9250 with the latest Jellybean 4.1.2 Firmware.

Read more »

Download and install - Update Update Galaxy Nexus I9250 with Jellybean 4.1.2 Firmware

 

How to Update Galaxy Nexus I9250 with Jellybean 4.1.2 Firmware

Procedure to Update Galaxy Nexus with the latest Jellybean 4.1.2 Firmware:

• This update can only be applied on the International version of Galaxy Nexus I9250 model and not on any of the network locked devices. Unlock the Boot loader of Galaxy Nexus from the mentioned instructions and then install the TWRP recovery in your Galaxy Nexus by following the instructions.

• Up next, download the Jellybean 4.1.2 Firmware Package and Google Apps for Galaxy Nexus I9250 from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place these two zip files in your Galaxy Nexus.

• Disconnect the phone and turn off your Nexus so that it can be entered in the recovery mode. Recovery mode in Samsung Galaxy Nexus I9250 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” and then select “install zip from sd card”> > “choose zip from internal sd card” to select the Jellybean 4.1.2 Firmware Package and Google Apps zip package placed in your device.

• Once the firmware is updated, the device will be rebooted and then all you need to do is to select “Go Back” and “reboot system now” for rebooting the device in the normal mode. It will take around 4 -5 minutes for applying the update.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy Nexus I9250 with the latest Jellybean 4.1.2 Firmware.

Read more »

Download and install - Update Galaxy S Blaze 4G with Jellybean Cyanogen Mod 10 Firmware

 

Procedure to Update Samsung Galaxy S Blaze 4G with Cyanogen mod 10 Firmware:

• Download the Cyanogen Mod 10 Firmware Package and Google Apps Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip files in your device.

• Once the two files are placed, disconnect the device and turn off your phone so that it can be entered in the recovery mode. Recovery mode in Samsung Galaxy Blaze 4G can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.

• In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” and then select “install zip from sd card”> > “choose zip from internal sd card” to select the Cyanogen Mod 10 Firmware Package and Google Apps Package placed in your device.

• Please note that it will take around 4 -5 minutes for applying this update. Once the update is applied, select “Go back” and “reboot system now” with the help of Volume Up / Down Keys and Power button. Also, be informed that it may take longer time than expected for rebooting the device as in the first reboot it will be finalizing all the data requiring for the startup.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the latest Cyanogen Mod 10 Jellybean firmware in your Samsung Galaxy Blaze 4G.

Read more »

Mini Sports (bada - wave game)

 

 

Olympic Sports game package. game soup.

Download

Read more »

MicroTrack dB (Bada - wave app)

 

Are you a music lover? Do you feel that you want to compose your own music on the go? Then Micro Track dB is the perfect app for you. The app is a perfect blend of musical instruments, basically the classical ones that define electronic music, and thus shall prove to be a blessing for those who want to learn as well as express their emotions through music.

Free Download

Read more »

MicrophoneHE (bada - wave app)

 

Microphone is a handy utility application that transforms your Bada phone
into a microphone. This can be accomplished in three simple steps. 1.  Start application Microphone.
2.  Connect Bada phone audio-out to microphone-in, like a PC or MAC, via 3.5 mm
male-to-male audio cable.
3.  Press PLAY inside application. Now your Bada phone just becomes a microphone.
Features
1.   High quality audio output
2.   Automatic shutdown during incoming call or SMS
3.   Built-in HowTo guide
4.   Volume control
5.   Power saving mode that enable application runs for very long time
6.   If phone is in flight mode, application igonres incoming call or SMS
7.   Very low latency
8.   If App is Interrupted by Incoming Call, SMS, Screen Lock, Screen Capture,
or Suspension, This App Terminates Automatically
Download

Read more »

Mikura (bada - wave game)

 

Mikura is a simple game where the player must help Mikura avoiding the obstacles.
Mikura is a very fragile jellyfish from out space, there are creatures trying to kill her.

To survive from their attacks, Mikura has to turn on the same color of its enemies.

in some levels the player uses the phone’s motion sensor.

In thismini-game, Mikura must go through 13 levels to get back home.

Free Download

Read more »

Poweramp Full Version Unlocker apk for android

 

Powerful Music Player for AndroidMusic moves people; it unites us, it allows us to relax, and sometimes, when done right, it can even motivate us to do great things. Poweramp does great things.
The #1 paid music player in the Google Play Store 3 years running—Poweramp is the most powerful music player available on the Android OS. Features like gapless play, an unmatched equalization system, great crossfade, and support for most popular music file format might all make Poweramp the best $5 you have ever spent in your life—1 million users would agree to that.
If you have not already, try out the free full trial version. The trial version will give you 15 days of the full, uninterrupted, Poweramp experience. That means you get to experience your music like only Poweramp can offer. If you need a few reasons why to buy the full version of Poweramp, here are two good reasons:
- Get all the future updates for free: Once you purchase Poweramp, all the future updates are free to you as long as you have the Unlocker.
- Have a dedicated music player: Poweramp is dedicated to being the best music player available, and we will never change from that. Poweramp is focus on doing nothing more than being a great music player.
installation
1. Install PowerAMP.apk (Don't run! / Clear Data!)
2. Install PowerAMP Unlocker.apk (Don't run!)
3. Install LuckyPatcher (Run and patch!)
4. Add patch on Boot (Custom patch!)
5. Enjoy 
Links:
http://adf.ly/DZRyA
http://ul.to/bffp65ci
http://rapidgator.net/file/44313474/P207.zip.html
http://filedefend.com/san16s51k9ka/P207.zip
http://www.filedownloads.org/6xmd4gjz3vl3/P207.zip.html
 skins and widgets:
Poweramp ICS Widget Pack : http://www.directmirror.com/files/MYKANA4J
PowerAmp eXTreme skin for widg :: http://www.directmirror.com/files/KUQNW7LO
Skins:
Poweramp Dark Metallic Skin v1.0.5 :: http://www.directmirror.com/files/0ON1W0JQ
Poweramp Light Metallic Skin ::  http://www63.zippyshare.com/v/93704131/file.html
Poweramp Green Skin v1.1 :: : http://www.directmirror.com/files/0BXACANY
Poweramp Brunneus Rubra Skin v1.0.1 :: http://www6.zippyshare.com/v/1030153/file.html
PowerAMP eXTreme skin v 1.1 ::: http://directmirror.com/files/1MYCWKWA

Read more »

Fresh Leaves live wallpaper apk for android

 

The FRESH LEAVES! Spring, Summer, Autumn, WinterThe FRESH GREEN! Everything growing! Everything comes to life. The FRESH green in your phones and tablets also will visit...

...or you may set or compose NEW SEASON THEMES,
NOW AVAILABLE leaves for: Spring, Summer, Autumn

Fresh Leaves is live wallpaper. You may change backgrounds, on/off elements, and more ! All in 3D in realtime - it's not a movie.

Download apk

Read more »

Digital Hive Live Wallpaper apk for android

 

A classy, beautiful, subtle live wallpaper

This live wallpaper displays a 3D grid of glowing, subtly pulsing hexagons. Select any color you like, or a mixture of two colors! Touch to make the hexagons tilt or glow.

Please make sure your device supports live wallpapers before downloading.

Please try the free version of this live wallpaper before purchasing! If you have any problems at all with this app, just send me an email and I'll fix it or refund you!

 Download apk

Read more »

Prince of Persia Classic - Android apk game

 

 

 

Requires root. !!! apk file, install the 'org.ubisoft.premium.POPClassic' folder into '/ sdcard / Android / OBB's 

Apk
http://adf.ly/DZPxJ

or
http://adf.ly/DZPzf

SD:sdcard/Android/obb
http://adf.ly/DZQ1h

or
http://adf.ly/DZQ3J

Read more »

Download and install - Update Samsung Kies v2.5

 

Sync your Samsung Android device with your PC

New colorful update for KIES.

Its now very fast and no lag while loading…

The letters are small and very good UI.

Slight animation effect. well optimised.

DOWNLOAD

Read more »

Blackberry HD Theme for wave - bada 2.0

 

Blackberry HD Theme for bada 2.0

This theme is supported on the following Samsung phones:

• S5380 Wave Y (Bada 2.0)
• S7250 Wave M (Bada 2.0)
• Wave 525 (Bada 2.0)
• Wave 533 (Bada 2.0)
• Wave 575 (Bada 2.0)
• Wave 578 (Bada 2.0)
• Wave 723 (Bada 2.0)
• Wave II (Bada 2.0)
• Wave III (Bada 2.0)
• Wave S8500 (Bada 2.0)

Download theme

Read more »