Twitter

Online

Sunday, July 8, 2012

Download and install Samsung Galaxy 3 i5801 with Cyanogen Mod 7.2 Firmware

How to Update Samsung Galaxy 3 i5801 with Cyanogen Mod 7.2 Firmware

Procedure to Update Galaxy 3 I5801 with latest Cyanogen mod 7.2 Firmware:
  • Before proceeding, ensure that you have rooted your Galaxy 3 I5801. If you haven’t rooted then you need to root the same by following the instructions mentioned in the above link.
  • Once the zip file is placed, disconnect the device and turn off the phone so that it can be entered in the recovery mode. The recovery mode in Galaxy 3 I5801 can be entered by pressing the Volume Up Key + Volume Down button and keeping both of these pressed, you now need to press Home button and Power button. Just in case if the device starts in the normal mode, then you will have to again retry the process of entering in the recovery mode.
  • Select “install zip from sd card” > “choose zip from sd card” and then choose the Cyanogen mod  firmware package and then select “Yes” with the help of Volume rocker keys and Menu button. Also, after this, you need to select the Google Apps Zip package which you have placed in your device.
  • Once the firmware is applied successfully, you now need to select “Go BACK” and select “reboot system now” for rebooting the device in the normal mode.
Note: In a rare case if the device refuses to boot or gets in the boot loop mode, you need to re insert the battery and turn ON the device normally. You can also re apply the update by following the above mentioned steps.
Congratulations, you have now successfully learnt on how to upgrade your Galaxy 3 I5801 device with the latest Gingebread based ICS looking Cyanogen Mod 7.2 custom ROM firmware. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.
This ROM was developed by marcellusbe on xda-developers

1 yorum:

Unknown said...

I tried installing it the way you said it but one error is coming that update.zip is not present in sd-card.
Its only showing it only no other zip file it is showing in sd card. Help me

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | belt buckles
Design Downloaded from Free Blogger Templates | Free Website Templates