Download and install Galaxy Nexus S 4G with Jellybean 4.1 Firmware Update

How to Update Galaxy Nexus S 4G with Jellybean 4.1 Firmware Update

Procedure to Update Galaxy Nexus S 4G with Official Jellybean 4.1 Firmware Update:

• Download the Jellybean 4.1 firmware Package for Galaxy Nexus S 4G from here to your computer. Once downloaded, you now need to connect your device with the computer using the original USB cable and then place the downloaded zip file in your device.

• Disconnect the device connected from the computer and turn off the same so that it can be entered in the recovery mode.

• The recovery mode in the Galaxy Nexus S 4G can be entered by Pressing the Volume down button and at the same time you need to press the power button to boot the device in the recovery mode.

• Select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume rocker keys. Also, you need to clear the “Wipe Dalvik Cache” from the Advanced Option. With the help of Volume rocker keys, select “++++ Go Back ++++” for going to the main home screen of recovery mode.

• Up next, select “install zip from sd card” > “choose zip from sd card” > and select the “Jellybean 4.1 Firmware Package” which you have placed in your device.

Note: if the device gets in the boot loop mode, then you will have to again follow all the above instructions mentioned from the start. You need to turn off the device by long pressing the power button till the phone vibrates.

Congratulations, you have now successfully applied the update of Jellybean 4.1 in your Galaxy Nexus 4G device. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.