5:46 PM
samsungapps
Not only in the name, is also Samsung Galaxy S4 Active Android smart phone Samsung ACTIVE and finally shoots the official Android OS 4.4.2 Kitkat. So finally go for all those who hate to wait and manually apply the latest firmware update on your device. After checking out, what are the essential list of instructions that you need to get ready to follow the device for the application of the firmware, we will head up to the detailed instructions that will help you get the device with this Kitkat Android OS 4.4. 2 update. Just for your information, this Kitkat 4.4.2 Android OS is dubbed as XXUCNE4 and S4 Active variant can only be applied to the I9295 Galaxy.
How to Update Galaxy S4 Active with Android OS 4.4.2 Kitkat:
Download Kitkat 4.4.2 firmware package and Odin from here to your computer. Once downloaded, now you need to extract both the zip files to a folder on your desktop for easy discovery.
Enter your Galaxy S4 active in download mode . By holding the Volume Down key + Home key button ( the middle button) . Hold these two buttons , you must turn on your device.
If Galaxy S4 Active comes in the normal mode , then you must use the command to retry the device into download mode .
Connect your tablet to your computer using the original USB cable. Assuming that Odin opened in your computer and ID: COM section is yellow / blue , click on "PDA" / tab "AP" in the Odin to the rooting file you after extracting the firmware package received , select click on "Start" in Odin.
Once you click "Start " , you will now need to look for the whole process of the firmware is ready to wait. The whole process of firmware update will take about 3 -4 minutes and once done , the phone will automatically restart .
Navigate to the path " Settings> About tablet " where you can check the firmware version 4.4.2 as Kitkat Android OS version XXUCNE4 .
Note: If all Galaxy S4 Active gets in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
So there you go , you have now successfully using the latest version of Android OS 4.4.2 Kitkat updated your tablet . Please let us know in the comments below just in case if you . Facial any questions during the upgrade
Enter your Galaxy S4 active in download mode . By holding the Volume Down key + Home key button ( the middle button) . Hold these two buttons , you must turn on your device.
If Galaxy S4 Active comes in the normal mode , then you must use the command to retry the device into download mode .
Connect your tablet to your computer using the original USB cable. Assuming that Odin opened in your computer and ID: COM section is yellow / blue , click on "PDA" / tab "AP" in the Odin to the rooting file you after extracting the firmware package received , select click on "Start" in Odin.
Once you click "Start " , you will now need to look for the whole process of the firmware is ready to wait. The whole process of firmware update will take about 3 -4 minutes and once done , the phone will automatically restart .
Navigate to the path " Settings> About tablet " where you can check the firmware version 4.4.2 as Kitkat Android OS version XXUCNE4 .
Note: If all Galaxy S4 Active gets in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
So there you go , you have now successfully using the latest version of Android OS 4.4.2 Kitkat updated your tablet . Please let us know in the comments below just in case if you . Facial any questions during the upgrade
0 yorum:
Post a Comment