Download-install and Manual Update Galaxy Note 10.1 N8000 with Official Kitkat 4.4.2 XXUDNE4 Firmware

 

Samsung Galaxy Note N8000 10.1 Android tablet can now be officially updated with the latest version of Android OS 4.4.2 Kitkat. The best part is that the new Android OS 4.4.2 Kitkat uses less memory and is faster than any other operating system of Android. So let us know how you need the same hand without you to get to the root device. Since this is the official firmware update, this update does not wipe the device or void your warranty in any way. This firmware is dubbed as XXUDNE4. After checking out what is in front of the list of specified conditions Quick below, we are writing to detailed instructions to help you apply this update.

 How to Update Galaxy Note 10.1 N8000 with Kitkat 4.4.2 Android OS ?

Download Android 4.4.2 0S Kitkat Package from here to your computer along with the Odin file. Once downloaded, extract Odin in your computer and turn off the N8000 Galaxy Note 10.1 .

    Enter your N8000 Galaxy Note 10.1 in download mode . By holding the Volume Down key + Home key button ( the middle button) . Hold these two buttons , you must turn on your device.

    If Galaxy Note 10.1 is in the normal mode , then you must use the command to retry the device into download mode .

    Connect your tablet to your computer using the original USB cable. Assuming that Odin opened in your computer and ID: COM section is yellow / blue , click on "PDA" / tab "AP" in the Odin to the rooting file you after extracting the firmware package received , select click on "Start" in Odin.

    Once you click "Start " , you will now need to look for the whole process of the firmware is ready to wait. The whole process of firmware update will take about 3 -4 minutes and once done , the phone will automatically restart .

    Once the device updates , you can now see that the device will reboot and it will take about 3 -5 minutes for setting up the machine .
Go to the path " Settings> About tablet " where you can check the firmware version 4.4.2 as Kitkat Android OS version XXUDNE4 .
Note: If at all Samsung Galaxy Note 10.1 is in the boot loop sequence , then you must turn off the power , then at the update from the beginning. To turn the battery use or say you can long press the power button.
So there you go , you have now successfully using the latest version of Android OS 4.4.2 Kitkat updated your tablet . Please let us know if you make in the process of firmware update in the comments section just in case any questions.