3:50 PM
samsungapps
Procedure to Update Galaxy SL I9003 with remics ICS Custom ROM Firmware:
- Download the Remics Custom ROM Firmware Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and then place the zip file in your device. Disconnect the device and turn off the phone so that it can be entered in recovery mode. The recovery mode can be entered by pressing the Volume Down Key + OK button, and holding both simultaneously press the Power Button.
- In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Remics Custom ROM Firmware Package which is placed in the phone. It will take around 3 – 4 minutes for applying the update. Also, you will see that the device might just stay on the S Logo for more than 3 -4 minutes.
- Once the update process is completed, the device will again land back to the recovery screen. In the recovery screen, select “++++ Go Back ++++” and then choose the option of “reboot system now” for rebooting the system. If in any case if you come across the force close errors then all you need to do is to just enter the device in the recovery mode and wipe all the cache data as well as wipe all the data present in your device.
Tip: Just in case if due to some reasons if the update process gets failed or interrupted, then you need to apply the update again by following the steps again from the start. Don’t forget to restore the backup which you have taken in the initial steps.
So there you go, you have now successfully installed the latest
firmware update of Remics in your device. Do share with us in the
comments section just in case if you face any issues as we will try our
level best to sort out the same.
0 yorum:
Post a Comment