Download and install Update Galaxy Note 2 N7100 with Kitkat 4.4.2 Firmware

 

Procedure to Update Galaxy Note 2 N7100 with the KitKat 4.4.2 Android Firmware:

• Download the Kit Kat 4.4.2 for  Galaxy Note 2 N7100 and Google Apps Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place the two zip files in your device.

• Disconnect the device so that it can be entered in the Recovery Mode. Manually Galaxy Note 2 N7100 can be entered in the recovery mode by pressing Volume Up Key, Centre button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the recovery mode.

• Select “install zip from SD Card” to choose the KitKat 4.4.2 Firmware Package which you have placed in the Note 2. Please note that it might take around 4 – 5 minutes for applying the update. Once updated, select “Go BACK” and choose the option of “Reboot System Now” for rebooting the device.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
You can check the firmware update from the path “Settings > More > About Phone > Firmware Version” where the firmware update version will be mentioned. Do let us know in the comments section just in case if you face any issues in the process of firmware update as we will try our level best to answer all your queries / issues at the earliest
Note: If at all your Galaxy Note 2 N7100 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.
Stay tunes to Android Advices as we will be very soon be coming out with the detailed guide which will help you install custom ROMs especially for Galaxy Note 2 N7100. Do let us know in the comments section just in case if you face any issues in the process of firmware update. You have now successfully rooted your device Galaxy Note 2 N7100.

Read more »

Download and install Update T-Mobile Galaxy S4 with UVUFNB4 Kitkat 4.4 Firmware

 

Procedure to Manual Update Galaxy S4 M919 Android Phone with KitKat 4.4.2 XXUFNB3 Android Firmware:

• Download Kitkat 4.4 Android update for Galaxy S4 M919 from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.

• Once placed, you then will have to disconnect the device so that it can be entered in the recovery mode.

• Turn off your device so that it can be entered in the Recovery Mode. Galaxy S4 can be entered into the recovery mode by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.

• Alternatively, you can also enter the recovery mode with the help of “ROM Manager” app. In recovery mode, select corresponding options to clear and wipe the data present in your phone.

• In recovery mode, select “install zip from sd card” and then choose the zip file of Firmware Zip Package which you have placed in your phone. Now, once the firmware is updated, select “Go Back” and select “reboot system now”.

• Please note that it might take 3 -4 minutes for applying the update. Once the update is applied and once you see the home screen in your device, you can disconnect the device from computer.

• To check on whether the firmware is applied successfully or not, head over to the path “Settings > About Phone” where the firmware version will be mentioned as KitKat 4.4.2 firmware.

Read more »

Download and install Update Kitkat 4.4 in Galaxy S3 Mini with Cyanogen Mod 11 Firmware

 

• 2D/3D HW Acceleration
• audio (both speakers/headphones/microphone)
• GPS and A-GPS – fast fix getting
• Glonass navigation
• compass
• sensors
• Wi-fi
• Bluetooth 4.0 with LE support A2DP
• all native tethers (Wifi/BT/USB)
• Google Play
• CM11 functionallity
• CPU sleep mode
• MTP
• ADB
• no flicker
• YouTube HQ
• Wifi direct
• 3.0.101 kernel
• external storage
• native 64GB+ sdcard support (exFAT)
• camera
• video playing
• SELinux (temporary disabled)
• BLN (backlight notifications) support
• offline charging
• auto EFS backup
• New BT/GPS/offline charging/sensors drivers – no longer buggy Samsung’s ones!
• built using Linaro toolchain
• no 1GHz bug

Procedure to Update Galaxy S3 Mini with KitKat 4.4 Cyanogen Mod 11 Firmware:

• Download the latest Cyanogen Mod 11 Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the original USB cable and place the zip file in your device’s internal memory.

• Once you have placed the file in your Galaxy S3 Mini, disconnect the device from computer and download the ROM Manager app from the Google PLAY Store. Now, select “reboot into recovery mode” for booting the device in the recovery mode. You can also enter the device into the recovery mode manually with the help of below mentioned step.

• Recovery mode in Galaxy S3 Mini can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. Now, in the recovery mode you will have to select “Wipe data/factory reset” & “Wipe Cache partition” so that all the data can be cleared in the device.

• Select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device for installing the update.  Once selected, the update process will be completed within 4 -5 minutes.

Please note that it may take around 3 -4 minutes for applying the update. Once the device is booted, you then will have to follow the on screen instructions for setting up the device.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
We will very soon be coming up with many new firmwares based on Kitkat 4.4 firmware update. Do share with us in the comments section below just in case if you face any issues as we will try to fix the same at the earliest.

Read more »

Download and install Update Galaxy S4 Mini I9190/ I9195 with Carbon Jellybean 4.3 Firmware

 

Procedure to Update Galaxy S4 Mini with Latest Jellybean 4.3 Firmware:

• Download Jellybean 4.3 for Galaxy S4 Mini I9190 / Jellybean 4.3 for Galaxy S4 Mini I9195 LTE from here to your computer along with the Google Apps Package. Once downloaded, connect your device to the computer and place the two zip files in your phone.

• Recovery Mode in Galaxy S4 Mini can also be entered by pressing Volume Up + Home Key and holding these both buttons you now need to press the Power button. If the device boots in the normal mode, you now need to retry the process.

• In recovery mode, select options to clear and wipe the data present in your phone by selecting the options like “Clear Data” and “Wipe Cache”.

• Select “install zip from sd card” and then select the firmware zip file which you have placed in the device and then followed by the Google Apps Package. It will take around 4 -5 minutes to apply both the zip files in your device.

• Once done, select “go back” and choose the option of “reboot in normal mode” for rebooting the device normally. Please note that it may sometime take more than 4 -5 minutes for rebooting the device in the normal mode. Once the firmware is updated successfully, it will load all required services in the device.

• To check on whether the firmware is update or not, you need to head over to the path “Settings > About Phone” where the current firmware will be mentioned as Jellybean 4.3 firmware.

Note: If at all your Galaxy S4 MIni smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.
Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Download and install Update Galaxy Note 2 N7100 with Official Jellybean 4.3 Android Firmware

 

Procedure to Update Galaxy Note 2 N7100 with Jellybean 4.3 Android Firmware:

• Download the Firmware Package of Jellybean 4.3 and Odin from here to your computer. Once downloaded, open Odin in your computer and turn off your device so that it can be entered in the Download Mode.

• Extract the downloaded firmware zip file to some folder preferably on desktop.

• Download Mode in Galaxy Note 2 can be entered by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. If the device starts normally, you need to retry the process of entering the device in the download mode.

• Once your Note 2 is entered in download mode, you can then connect your device to the computer with the help of original USB cable. Download Mode is indicated by the green robot.

• Once connected, it will take around 3-5 minutes for installing all the drivers. Once installed, you will see that ID: COM section in Odin will turn Yellow indicating that all the drivers are installed successfully.

• Click on “PDA” to select the firmware file which you got after extracting the firmware zip file in the initial step.

• As soon as the firmware file is selected, click on “Start” for starting the process of firmware update. It will take around 3 – 5 minutes for applying the update. Once updated, the phone will reboot automatically indicating that the firmware update process is completed.

• Now, disconnect the device from computer and head over to the path “Settings > More > About Phone” where you will get to see the current firmware version as Jellybean 4.3 Android Firmware which is XXUENC3.

Note: If at all your Galaxy Note 2 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can rein
So there you go, you have now successfully updated your device with the latest version of XXUENC3 firmware. Do let us know in the comments section just in case if you have any issues in the process of firmware update.

Read more »

Download and install Update Galaxy Note 3 Neo N750 with Jellybean 4.3 XXUANAD Android Firmware

,

Procedure to Update Galaxy Note 3 Neo N750 with XXUANAD Jellybean 4.3 Android Firmware:

• Download Firmware for Galaxy Note 3 Neo N750 and Odin from here to your computer. Once downloaded, extract both the files and open Odin in your computer.

• Turn off your device so that it can be entered in the Download Mode. Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy Note 3 Neo N750 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Connect your phone to the computer while keeping Odin opened in your computer. Once connected, you will see that the ID: COM section will turn Blue/ Green/ Yellow indicating that all the drivers are installed successfully.

• In Odin, click on “AP” to select the PDA file which you got upon extracting the file in your computer. Once selected, click on “Start” to start the process of firmware update. Make sure that in Odin, Auto Reboot and F: Reset Time check boxes are selected.

• The whole process of firmware update will take around 4- 5 minutes and once done you will have to wait for the device to install all the apps in the device.

• As soon as the device gets rebooted, you can then head over to the Settings > More to check out the current version details in About Phone section where it will be mentioned as XXUANAD Jellybean 4.3 firmware.
•  Note: If at all your Galaxy Note 3 Neo N750 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.

Read more »

Download Official Samsung Galaxy S5 Stock Wallpapers

 

Samsung Galaxy S5 has been finally announced which is the next flagship model for the year 2014. And for all those who are waiting to make use of the wallpapers of Galaxy S5, we will help fulfil your wish. While we are still waiting for complete wallpaper pack of Galaxy S5, we got 2 of the wallpapers which are from Samsung Galaxy S5. In the Google PLAY Store, there are many apps which pretend to offer Galaxy S5 launcher and themes along with the Galaxy S5 wallpapers but doesn’t offer you the original wallpapers.

You can download the below mentioned wallpapers in your computer / phone directly to set the same as your device wallpapers. Since these wallpapers are the static wallpapers and not the live wallpapers, almost every smartphone can make use of these stock wallpapers of Galaxy S5. We will keep on adding more and more wallpapers of Galaxy S5 very soon. Do bookmark this article so that you can refer back for additions of remaining stock wallpapers of Galaxy S5.

Download

Read more »