Download and install - Update Galaxy SL I9003 with Super Stable EHNDROIX ICS based Firmware

 

Procedure to Update Samsung Galaxy SL I9003 with ICS EHNDROIX Firmware:

• Download the EHNDROIX Custom ROM & S3 Styled Package from here to your computer. Once downloaded, connect your phone to the computer with the USB cable and place these two zip files in your device. Don’t put the files deep into the sub folders.

• Disconnect the device and turn off the phone so that it can be entered in recovery mode. The recovery mode can be entered by pressing the Volume Down Key + OK button, and holding both simultaneously press the Power Button.

• In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the EHNDROIX Firmware Package which is placed in the phone and then followed by which you need to select the S3 styled Package.

• Once the update process is completed, the device will again land back to the recovery screen. In the recovery screen, select “++++ Go Back ++++” and then choose the option of “reboot system now” for rebooting the system. If in any case if you come across the force close errors then all you need to do is to just

Tip: Just in case if due to some reasons if the update process gets failed or interrupted, then you need to apply the update again by following the steps again from the start. Don’t forget to restore the backup which you have taken in the initial steps.

If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
Congratulations, you have now successfully applied this all new ICS based firmware in your device. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.