How to Root Galaxy S3 GT I9300 on XXUGNB6 Firmware

 

Procedure to Root Galaxy S3 GT I9300 on XXUGNB6 Firmware:

• Download  XXUGNB6 Rooting Package along with Odin from here to your computer. Once downloaded, you now need to enter your Galaxy S3 I9300 in download mode.

• Turn off your Galaxy S3 I9300 and after 5 seconds or when your device gives a small vibration, hold the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device to see the Green Robot on the screen.

• Connect your device in Download mode with the computer in which you have opened the Odin. In Odin you will see that the ID:COM section will turn yellow indicating that all the drivers are installed successfully.

• Once done, click on “PDA” / “AP” depending upon the Odin version to choose the Rooting tar file which you got after extraction and click on “Start” to start the process of rooting. It will take around a minute for rooting the device. In some cases it may taken even longer time than expected.

• Download the “Root Checker” app from the Google PLAY Store to check on whether the device is rooted or not. Just in case if the device is not rooted, you need to retry the process of rooting.

Tip: Since rooting voids warranty, if you need to get back the lost warranty, you need to update the device with the below mentioned firmware by following the respective instructions.
Manual Update Galaxy S3 GT I9300 with Official Jellybean 4.3 XXUGNB6 Firmware – Guide
Note: Just in case if your Samsung Galaxy S3 GT I9300 gets in the boot loop sequence then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.
Do let us know in the comments section or on out Facebook / Google+ Page if you face any issues. We will very soon be coming up with the detailed guide which will help you install the custom ROM firmwares.

Read more »

Download and install Update Galaxy S3 with most stable & Official Jellybean 4.3 XXUGNB6 Android Firmware

 

Guide to Update Galaxy S3 with Jellybean 4.3 Android OS:

• Download the Jellybean 4.3 Android OS Package  and Odin from here to your computer. Once downloaded, extract both the packages and open Odin in your computer.

• Turn off your device so that it can be entered in the Download Mode. Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy S3 i9300 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Connect your device to the computer using the original USB cable to see that the ID: COM section turns Blue which indicates that all the drivers have been installed in the computer.

• Now, in Odin, select Auto Reboot and F. Reset Time options. But, the Re-Partition option must be checked.

• Click on “AP” to choose the tar file which you got after extracting the firmware file. Once the tar file is selected, click on “Start” to start the process of firmware update. Please note that the whole process of firmware update will take around 4 -5 minutes and once done, you now need to wait to see “PASS” in Odin.

• If Google Apps gets crashed after installing, you need to turn Off the device so that it can be entered in the recovery mode. Press and hold Home + Power + Volume Up buttons to enter the device in the Recovery Mode. If your Galaxy S3 i9300 enters in the Normal mode, then you need to re try the process of entering the device in the Recovery Mode.

• In recovery mode, select “Clear Cache/ Wipe Data” options to clear the cache and wipe the data. As soon as the device gets rebooted, you can then head over to the Settings > More to check out the current version details in About Phone section where it will be mentioned as XXUGNB6 Jellybean 4.3 Android OS.

Note: If at all your Galaxy S3 I9300 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.
Do let us know in the comments section just in case if you face any issues in the process of firmware update.

Read more »

Samsung galaxy s3 Weather clock widget for Samsung star

 

Samsung galaxy s3 Weather clock widget for Samsung star

 This widget galaxy s3. Weather clock. But he hangs. Who can, please make it weather, leave only hours) as in the picture.

Download

Read more »

Download Firmware For Samsung B3410 ( B3410XEJC3 ) Corby plus

 

Firmware Samsung B3410XEJC3 Corby plus

Download

 

Read more »

Download and install Update Galaxy S4 I9500 with Official Kitkat 4.4.2 XXUFNB3 Firmware

 

Procedure to Manual Update Galaxy S4 I9500 Android Phone with KitKat 4.4.2 XXUFNB3 Android Firmware:

• Download KitKat 4.4.2 Android Firmware Package and Odin from here to your computer. Once downloaded, open Odin in your computer and turn Off your device so that it can be entered in the Download Mode.

• Press and hold Home + Power + Volume down buttons to enter the device in the Download Mode. If your Galaxy S4 I9500 enters in the Normal mode, then you need to re try the process of entering the device in the Download Mode.

• Click on “AP” tab in the Odin to select the tar file which you got after extracting the firmware package to click on “Start” in Odin.

• Once you click on “Start”, you will now need to wait for the whole process of firmware gets finished. The whole process of firmware update will take around 3 -4 minutes and once done, the phone will be rebooted automatically.

Note: If at all your Galaxy S4 I9500 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button.

Do let us know in the comments section just in case if you face any issues in the process of firmware update. You have now successfully updated the latest version of KitKat 4.4.2 Android firmware in your Samsung Galaxy S4 Android smartphone. We will very soon be coming up with the rooting process for your Galaxy S4 I9500 on XXUFNB3 firmware version of Kitkat 4.4.2.

Read more »

Download and install Update Galaxy Note 2 N7100 with Kitkat 4.4.2 Firmware

 

Procedure to Update Galaxy Note 2 N7100 with the KitKat 4.4.2 Android Firmware:

• Download the Kit Kat 4.4.2 for  Galaxy Note 2 N7100 and Google Apps Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and place the two zip files in your device.

• Disconnect the device so that it can be entered in the Recovery Mode. Manually Galaxy Note 2 N7100 can be entered in the recovery mode by pressing Volume Up Key, Centre button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the recovery mode.

• Select “install zip from SD Card” to choose the KitKat 4.4.2 Firmware Package which you have placed in the Note 2. Please note that it might take around 4 – 5 minutes for applying the update. Once updated, select “Go BACK” and choose the option of “Reboot System Now” for rebooting the device.

Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
You can check the firmware update from the path “Settings > More > About Phone > Firmware Version” where the firmware update version will be mentioned. Do let us know in the comments section just in case if you face any issues in the process of firmware update as we will try our level best to answer all your queries / issues at the earliest
Note: If at all your Galaxy Note 2 N7100 smartphone gets in the boot loop mode, then you need to turn off the device and then reapply the update from the start. To turn off you can reinsert the battery or say you can long press the power button and repeat the whole process again.
Stay tunes to Android Advices as we will be very soon be coming out with the detailed guide which will help you install custom ROMs especially for Galaxy Note 2 N7100. Do let us know in the comments section just in case if you face any issues in the process of firmware update. You have now successfully rooted your device Galaxy Note 2 N7100.

Read more »

Download and install Update T-Mobile Galaxy S4 with UVUFNB4 Kitkat 4.4 Firmware

 

Procedure to Manual Update Galaxy S4 M919 Android Phone with KitKat 4.4.2 XXUFNB3 Android Firmware:

• Download Kitkat 4.4 Android update for Galaxy S4 M919 from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.

• Once placed, you then will have to disconnect the device so that it can be entered in the recovery mode.

• Turn off your device so that it can be entered in the Recovery Mode. Galaxy S4 can be entered into the recovery mode by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.

• Alternatively, you can also enter the recovery mode with the help of “ROM Manager” app. In recovery mode, select corresponding options to clear and wipe the data present in your phone.

• In recovery mode, select “install zip from sd card” and then choose the zip file of Firmware Zip Package which you have placed in your phone. Now, once the firmware is updated, select “Go Back” and select “reboot system now”.

• Please note that it might take 3 -4 minutes for applying the update. Once the update is applied and once you see the home screen in your device, you can disconnect the device from computer.

• To check on whether the firmware is applied successfully or not, head over to the path “Settings > About Phone” where the firmware version will be mentioned as KitKat 4.4.2 firmware.

Read more »