Online

Tuesday, December 11, 2012

Sketch Note Theme For Samsung corby 2


CORBY 2 THEMES: Sketch Note Theme by Anonymous 
Sketch Notes lets you jot down ideas, sketch ideas or note down anything else you would with your paper notebook. A nice grid background helps sketching accurately and to scale. Works especially well with a traditional stylus and resistive touchscreen tablets, as well as with your finger on capacitive screen tablets and phones.
 

Apple theme for Corby 2

 
 corby-2-themes-stained-theme

Download and install - Update Galaxy S3 with Official Jellybean 4.1.2 XXELKC Firmware

S3 Logo 
Procedure to Update Galaxy S2 GT I9100 with the Latest Jellybean 4.1.2
  • Download the Latest Jellybean 4.1.2 Firmware Package and Odin from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your Galaxy S3’s external SD Card.
  • Once you have placed the zip file, disconnect the device and turn Off your phone so that it can be then entered in the Download Mode.
  • The download mode in Galaxy S3 GT I9300 can be entered in recovery mode by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.
  • Open Odin in your computer and connect your Galaxy S3 while it’s in the download mode with the computer and then you will see that after a minute the ID : COM section will turn Yellow indicating that all the drivers are successfully installed.
Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
        Install the USB Drivers in your computer &
        Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.
  • Click on “PDA” to select “” the tar file and then select the option of “Start” for starting the process of firmware update. As soon as the update is applied successfully, you will see that the device will be rebooted.
  • Please note that it may take more than 5 -6 minutes for applying the update and to reboot since it has to finalize all the app data etc. Once the device shows up the home screen, navigate to “Settings > About Phone” the current firmware version will be mentioned as Jellybean 4.1.2.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
So, there you go, you have now successfully updated your device with the latest Jellybean XXELKC Firmware which ropes in the latest Jellybean 4.1.2 firmware.

Download and install - Update Galaxy S GT I9000 with Jellybean 4.1.2 Codename Android Firmware

Codename Android 
Procedure to update Galaxy S I9000 with Codename Android 4.1.2 Firmware:
  • Download the Google Apps Package and Codename Android 4.1.2 Firmware from here to your computer. Once downloaded, connect your device to the computer and place these two zip files in your internal SD Card. Ensure that you are not placing the file deep into the sub folders.
  • Disconnect the device and turn off your phone so that it can be entered in the recovery mode.
  • Recovery mode in Galaxy S GT I9000 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.
  • Now, in the recovery mode, select “install zip from sd card” > “choose zip from internal sd card” and then choose the Codename Android Custom ROM Firmware and Google Apps Package. It will take around 4 -5 minutes for applying the update.
  • Once you see the “install from sd card complete” message on screen, select “Go Back” and select “reboot system now” for rebooting the device in the normal mode. To check whether the firmware is updated or not, head over to the path “Settings > About Phone” where you will find the current firmware version.
Note: just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Root Samsung Galaxy Y S5360


Galaxy Y Logo 
Guide to Root Samsung Galaxy Y S5360 Android Phone:
  • Download the Rooting Package from here to your computer. Once downloaded, connect your phone to the computer with the help of original USB cable and then place the Rooting Package in your device’s external sd card.
  • Disconnect the device from computer and turn off your phone so that it can be entered in the recovery mode.
  • The recovery mode can be entered by pressing  Volume UP Key + OK button, and holding both simultaneously press the Power Button. Now, in recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” so that all the cache data will be cleared.
  • Now, select “install zip from sd card” and then select the rooting package file which you have placed in your device and press the power button to confirm the same. Once the file is selected, you need to just follow the on screen instructions for rooting the device. Please note that the whole process will take around 3 -4 minutes and may take longer time in some cases.
  • To check on whether your device is rooted or not, you will have to download the “Root Checker” app from the Google PLAY Store. If your Galaxy Y is not rooted, then you need to re follow the instructions mentioned above.
Do share with us in the comments section just in case if you come across any issues in the process of this update as we will try our level best to address the same.

Download and install - Update Galaxy Y S5360 with ICS Styled USSR V8 Stable Custom ROM Firmware

Galaxy Y Logo 
USSR 1 USSR 2 USSR 3 USSR 4 USSR 5 USSR 6 
Guide to Update Galaxy Y S5360 with ICS Looking Custom ROM Firmware:
  • Download USSR V8 Firmware package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and then place the zip file in your device.
  • Once placed, disconnect the phone and turn off your phone so that it can be entered in the recovery mode. Alternatively, you can also enter your Galaxy Y into recovery mode with the help of ROM Manager app which can be downloaded from Google PLAY Store.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.
  • Recovery mode can in Galaxy Y can be entered by pressing  Volume UP Key + OK button, and holding both simultaneously press the Power Button. Now, in recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition” so that all the cache data will be cleared.
  • Now, select “install zip from sd card” and choose the USSR V8 Firmware package zip which you have placed in your phone. It will take around 3 -4 minutes for applying the update.
  • Once the firmware is updated successfully, you will get to see the message “install from sd card complete” and then select “go back” with the help of volume rocker keys and select “reboot system now” for rebooting the device ion the normal mode.
Tip: If your Galaxy Y S5360 doesn’t power up or say it gets into the boot loop mode, you need to re insert the battery and then re try the process of firmware update by following the above steps.
  • To check on whether your device has updated with this firmware or not, head over to “Settings > About Phone” then you will get to see the current firmware version as USSR V8 2.3.6 Firmware.
Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Tuesday, December 4, 2012

Download and install - Update Samsung Galaxy S3 I9300 Omega v33.2 Jellybean 4.1.2 Custom Firmware

Galaxy S2 Pink logo 
Procedure to update Galaxy S3 GT I9300 with Omega v 33.2 Custom ROM firmware:
  • Download the Omega v 33.2 Custom ROM Firmware Package from here to your computer. Once downloaded, connect your phone to the computer and place the zip file in your external sd card and not in your phone memory.
  • Disconnect the device from computer and turn off your Galaxy S3 so that it can be entered in the recovery mode. Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. You can also enter the device in recovery mode via the ROM Manager app.
  • Select “install zip from sd card” > “choose zip from internal sd card” and then choose the Omega Custom ROM Firmware which you have placed in your phone. It will take around 4 -5 minutes for applying the update.
  • Once the update is applied, select the option of “Go Back” and “Reboot System now” for rebooting the device in the normal mode. Since it’s a first reboot, it will take more time than the normal mode as it has to finalize all the apps etc.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go you have now successfully learnt on how you can upgrade your Galaxy S3 with the Omegas v33.2 custom ROM Firmware.

Download and install - Update Jellybean 4.1.2 XXLSA Firmware in Galaxy Note N7000

Jellybean 4.1.2 Logo 
XXLSA1 XXLSA2 XXLSA3 XXLSA4 XXLSA5 XXLSA6 XXLSA7 XXLSA8
Procedure to Update Galaxy Note N7000 with Jellybean 4.1.2 XXLSA Firmware:
  • Download XXLSA Jellybean 4.1.2 Firmware Package from here to your computer along with Odin in your computer. Once downloaded extract both of them preferably to the folders on Desktop. Once extracted, open odin in your computer and turn off your Galaxy Note so that it can be entered in the Download Mode.
  • The download mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Just in case if the device turns ON in the normal mode, you will have to again retry entering the device in the download mode.
  • Connect your phone to computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow which will mean that all the drivers have been installed successfully and you are ready to proceed to the next step wherein you will have to click on the below mentioned corresponding tabs to select the file from extracted firmware package.
PDA – CODE_N7000XXLSA_549786_REV02_user_low_ship.tar.md5,
Phone – MODEM_N7000XXLSA_REV_05_CL1222228.tar.md5,
CSC – CSC_OXA_N7000OXALSA_549786_REV02_user_low_ship.tar .md5
  • Make sure that Re-Partition option is unticked and nothing should be added in the PIT section. Once you are done with all the above mentioned selections, you can now head over to the next step wherein you need to click on “Start” to start the process of firmware update.
  • It will take around 3 -4 minutes for applying the firmware, once the firmware is updated successfully you will see that device will be rebooting on its own.
  • To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same where you will see the version details as XXLSA Jellybean 4.1.2 firmware.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Galaxy ACE 2 I8160 Root with Official Gingerbread XXLD8 2.3.6 Firmware

Samsung 
Procedure to Update Galaxy ACE 2 I8160 with XXLD8 Firmware:
  • Now, turn off your phone so that the device can be entered in the download mode. The download Mode in Galaxy ACE 2 can be entered by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.
  • Now, connect your device to the computer with the help of original USB cable and you will see that the ID : COM section will turn Yellow which means that all the drivers in the computer have been installed successfully.
Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
        Install the USB Drivers in your computer &
        Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.
  • In Odin, click on “PDA” to select “tar file which you get after extracting the firmware package” and click on “Start” to start the process of firmware update. It will take around 3 -4 minutes for applying the update. Once the update is applied successfully, you will then check the same from the path “Settings > Abut Phone” where you can see the firmware version as XXLD8 firmware.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
  • To check on whether the firmware is rooted or not, you will have to check the same from the application called “Root Checker”. Download the Root Checker app from the Google PLAY Store and check with the same.
Congratulations, you have now successfully applied the update of XXLDI8 Firmware Update. Do let us know in the comments section just in case if you face any issues in the process of applying this firmware update as we will try our level best to sort out the same. In the coming days we will come up with more such firmwares.

Download and install - Update Best Jellybean 4.1.2 Firmware for Galaxy SL I9003

Jellybean Media Logo 
Procedure to Update Galaxy SL I9003 with Jellybam 4.1.2 Firmware:
  • Download the latest Jellybam 4.1.2 Firmware Update from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the same in your device.
  • Ensure that you are not placing the file deep into the sub folders as it may not be detected in the recovery mode.
  • Assuming that you have downloaded the ROM Manager app from the Google PLAY Store, you now need to select the option of “Flash Clock Work Mod Recovery”. Once it’s done, select “reboot into recovery mode” so that the device gets into the recovery mode.
  • Alternatively, you can also enter your I9003 into the recovery mode by Holding the volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode.
  • Now, in recovery mode select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache so that all the cache data is wiped off. Once it’s done, select “install zip from sd card” and then select the Jellybam Firmware Zip Package which you have placed in your device.
  • Once the firmware is updated successfully, you will see the message on screen that “install from zip card complete”, now all you need to do is to just select “go back” and then select “reboot system now” for rebooting the device in the normal mode. Please note that it may take longer time than expected for rebooting the device and to show the hone screen.
  • To check on whether the update has successfully applied or not, you will need to check the same from the path “Settings > About Phone” where the firmware version will be mentioned as “Jellybam 4.1.2” firmware.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the then battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Root Galaxy S2 GTI9100 on XXLSJ Jellybean 4.1.2 Firmware

Jellybean Logo 
Procedure to Root Galaxy S2 on XXLSJ Jellybean 4.1.2 Firmware:
  • Download Odin and XXLSJ Firmware Package from here to your computer. Once downloaded, extract the firmware package and open the Odin in your computer.
  • Turn Off your Galaxy S2 so that it can be entered in the download mode. The download mode in Galaxy S2 GT I9100 can be entered in recovery mode by pressing the Volume Up rocker key + power button at the same time while the device is turned Off. If the device starts in the normal mode, you need to re try the process of the entering the device into the download mode.
  • Connect your Galaxy S2 with your computer / Laptop and then in Odin you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.
Note: If ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
Install the USB Drivers in your computer &
Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.
  • Now, click on “PDA” to select the tar file which you got after extraction. Once selected, click on “Start” the process of Rooting. Once the rooting process is done, the phone will be rebooted. Please note that it might take few moments of time for rebooting the device and may take longer time than expected to show up the home screen.
Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.
  • Download the Root Checker app from the Google PLAY Store to check whether your device is rooted or not.  Also, if it’s rooted, you then will have to download and install the ROM Manager app from the Google PLAY Store.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully rooted your device with the latest

Download and install - Update Jellybean 4.1.2 Firmware for Samsung Galaxy W I8150

 
Procedure to Update Samsung Galaxy W I8150 with Jellybean 4.1 Firmware:
  • Download the Jellybean 4.1 firmware package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your Samsung Galaxy W I8150 smartphone.
  • Now, assuming that you already installed the ROM Manager app in your device you need to open the app and select “Flash Clock Work MOD Recovery” and then select Enter into Recovery Mode” for booting the device in the recovery mode. In recovery mode, select Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.
  • Select “Now, select “install zip from sd card” to choose the placed Jellybean 4.1 firmware package Zip Package which you have placed in your device. It will take around 3 – 5 minutes for applying the update. Please note that sometimes it may take more than expected time for updating the same. Once the update is applied, it may take longer time for reboot as it’s the first time after booting the device.
  • Now, once the firmware is updated, select “go back” and select “reboot system now”. To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Nexus S with Jellybean 4.2 Firmware

4.2 
Procedure to Update Jellybean 4.2 in Nexus S smartphone:
  • Download the Jellybean 4.2 Firmware Package from here to your computer. Once downloaded, connect your Nexus S smartphone to the computer with the help of original USB cable and once you have copied the same, you will need to disconnect the device.
  • Assuming that you have downloaded the ROM Manager app from PLAY Store, open the same to select “FLASH Clock Work Mod Recovery Image” for flashing the CWM image in the device. It will download the image from Wi Fi / Mobile Internet, so ensure that you have active internet connection.
  • Now, once it’s finished, you will be notified about the same and then select “reboot into recovery mode”.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.
  • Now, select “install zip from sd card” to choose the placed Jellybean 4.2 Firmware package in your deivce. Once selected, it will take around 2 -3 minutes for applying rhe update. Now, once the firmware is updated, select “go back” and select “reboot system now”. To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the latest firmware update of Jellybean 4.2 in Nexus S smartphone.

Download and install - Update Galaxy S2 I9100G with Jellybean 4.2 Cyanogen Mod Firmware

Galaxy S2 Logo 
Procedure to Update Galaxy S GT I9000 with Jellybean 4.2 Firmware:
  • Once you have placed these two files, disconnect the device from computer to download the “ROM Manager” app from PLAY Store. Open the app and grant the Superuser access by tapping on the “Grant” option.
  • Now, from the ROM Manager app, select “Enter into Recovery Mode” for booting the device in the recovery mode or else you can also manually enter the device in the recovery mode by first turning Off the device. Recovery mode in Galaxy S GT I9000G can be entered manually by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode.
  • Now, select “install zip from sd card” to choose the placed Cyanogen Mod 10 Jellybean 4.2 Zip Package and Google Apps Package. It will take around 3 – 5 minutes for applying the update. Please note that sometimes it may take more than expected time for updating the same.
  • Now, once the firmware is updated, select “go back” and select “reboot system now”. To check on whether the firmware is updated or not, head over to the path “Settings > About Phone” for checking the same.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.

Download and install - Update Galaxy SL I9003 with Fully Featured Frankenstain Firmware

Frankenstain 
Procedure to Update Galaxy SL I9003 with Frankenstain Firmware:
  • Download the Frankenstain Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip package in your device.
  • Disconnect the device and turn Off the phone so that it can be entered in the Recovery Mode. Download the ROM Manager app from the PLAY Store and select the option of “Flash Clock Work Mod Recovery”. Once it’s done, select “reboot into recovery mode” so that the device gets into the recovery mode.
  • Alternatively, you can also enter your I9003 into the recovery mode by Holding the volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode.
  • Now, in recovery mode select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache so that all the cache data is wiped off. Once it’s done, select “install zip from sd card” and then select the Frankenstain Firmware Zip Package which you have placed in your device.
  • It will take around 4 -5 minutes for applying the update and once it’s done, you will get to see the language selection screen and then just follow the on screen instructions to get to the home screen and enjoy the device on this latest firmware. You can check whether the firmware is updated or not from the path “Settings > About Phone” where the firmware details will be mentioned.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the then battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Download and install - Update Galaxy S3 with Insert Coin Evolution 3.0 XXELK4 Jellybean 4.1.2 Firmware

Jellybean Logo 
Procedure to Update Galaxy S3 I9300 with Insert Coin Firmware:
  • Download the Insert Coin Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place this zip file as it is in your device. Ensure that you are not placing the file deep into the sub folders.
  • Once the zip file is placed, you now will have to download the ROM Manager app from the Google PLAY Store. You can either enter the device in recovery mode with the help of ROM Manager app or with the manual step which is mentioned below.
  • Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy S3.
  • In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.
  • Now, select “install zip from SD Card” to find for all the zip files present in your Galaxy S3 device, select the placed InsertCoin Custom ROM Firmware package to initiate the process of firmware update.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go, you have now successfully updated your Galaxy S3 with Jallybean based Insert Coin Firmware.

Download and install - Update Galaxy S3 GT I9300 with Ultima ROM Jelybean 4.2 Custom ROM Firmware

ultima ROM 
 update
Youtube1 15_Toggle_Brightness_Slider Settings_View App_List_View Homescreen_View AOSP_Lockscreen1 
Procedure to Update Galaxy S3 with Ultima ROM Custom ROM Firmware:
  • Download Ultima Custom ROM Firmware Package from here to your computer. Once downloaded, connect your Galaxy S3 to the computer with the help of original USB cable and then place the zip file in the external sd card.
  • Once placed, disconnect the device from computer and open the ROM Manager app from the Apps list to select “reboot into recovery mode” so that the device can be booted in the recovery mode.
  • Now In recovery mode, select “install zip from sd card” to choose the placed zip file of Ultima ROM from external SD Card. Once selected, confirm the same. It will take around 3 -5 minutes for applying the update. Once the update is applied successfully, the device will reboot. It may take more than 4 -5 minutes for rebooting the device.
  • Once the device is booted, you will have to select the country and language options and then home screen will be shown.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode. If you get any force close errors you will have to select options Wipe data/factory reset” & “Wipe Cache partition” in the recovery mode.
Do let us know in the comments section below just in case if you face any issues as we will be more than happy to help you out.

Download and install - Update Galaxy Note N7000 with Jellybam 4.2 Firmware

screenshot
Procedure to Update Galaxy Note N7000 with Jellybam 4.2 Firmware:
  • Download the Jellybam 4.2 Firmware Package from here to your computer, once downloaded connect your Galaxy note N7000 with the computer using the original USB cable and place the zip file in your device. Ensure that you are not placing the file deep into the sub folders as it may not detect in the recovery mode.
  • Now, download the ROM Manager app from the Google PLAY Store and select “reboot in recovery mode” for booting the device in the recovery mode. Alternatively, you can also enter the device in the recovery mode with the help of manual step below.
  • Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy Note.
  •  In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware. Now, select “install zip from SD Card” to find for all the zip files present in your Galaxy Note device, select the placed Jellybam Custom ROM Firmware package to initiate the process of firmware update.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So, there you go, you have now successfully updated your Galaxy Note with the Jellybam 4.1.2 – 4.2 firmware.

Download and install - Update Galaxy S3 GT I9300 with LG Nexus 4 Styled Codec ROM Firmware

Jellybean Media Logo 

codecrom screen1 
Features of Codec ROM Nexus 4 Styled:
  • Deodexed
  • Zipaligned
  • Rooted (CF SuperSU 0.97)
  • BusyBox
  • Call Record
  • No SMS In Logs
  • Disabled Scrolling Cache
  • Extended Power Menu
  • Aroma Installer (Custom Install) – Updated Aroma Installer to 2.56
  • Modded Camera
  • Build Prop Tweaks
  • SQLite3
  • Faster GPS Fix
  • 761mb rom
  • 15 Toggles (Choice)
  • Silent Camera
  • Disabled Increasing Ringtone In Phone
  • Ad Blocking
  • Removed Multiple Tones (low battery, usb connection etc)
  • Centered clock on statusbar or stock
  • Full GPU Acceleration in UI

Procedure to Update Galaxy S3 with Nexus 4 Loaded Apps Firmware Update:
  • Download the Nexus 4 Styled Custom ROM Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.
  • Now, disconnect the device and open the ROM Manager app in your phone so that it can be entered in the recovery mode. The recovery mode can also be entered with the below mentioned manual step.
  • Hold the Volume Up button + the Home key button (the middle button) and while holding these both keys, press the Power button for turning the device ON in the recovery mode in your Galaxy S3.
  •  In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. Also, select “advanced” and clear the Dalvik cache too if you are on the custom ROM firmware.
  • Now, select “install zip from SD Card” to find for all the zip files present in your Galaxy S3 device, select the placed Codec ROM LG Nexus 4 Custom ROM Firmware package to initiate the process of firmware update.
  • As soon as the update is applied successfully, you will get to see the message of “install from sd card complete”. Now, it will take around 4 -5 minutes for booting the device as it’s the first time the device will be booting after applying the update. If you get any force close errors you will have to select options Wipe data/factory reset” & “Wipe Cache partition” in the recovery mode.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do let us know in the comments section below just in case if you face any issues as we will be more than happy to help you out. Congratulations, you have now successfully learnt on how you can easily apply the latest update of LG Nexus 4 styled codec ROM firmware in your device.

Download and install - Update Galaxy S3 with Jellybean 4.1.2 Thunderbolt Custom ROM Firmware

S3 Logo 
Procedure to Update Galaxy S3 with Thunderbolt Custom ROM Firmware:
  • Download the Thunderbolt Custom ROM Firmware from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in your device.
  • Once the zip file is placed, disconnect the device and turn off your Galaxy S3 smartphone so that it can be entered in the recovery mode. You can either enter your device in the recovery mode with the help of ROM Manager app or with the manual method which is mentioned below.
  • Recovery mode in Galaxy S3 GT I9300 can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device. Now, in the recovery mode you will have to select “Wipe data/factory reset” & “Wipe Cache partition” so that all the data can be cleared in the device.
  • Now select “install zip from SD Card” in the recovery mode to choose the zip file which you have placed in your device. Once the zip file is selected, it will take around 4 -5 minutes for applying the update. Once the device is updated with the firmware, head over to the path “Settings > About Phone” where the firmware version will be mentioned as Thunderbolt Jellybean 4.2.1 firmware.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do let us know in the comments section below just in case if you face any issues as we will be more than happy to help you out. Congratulations, you have now successfully applied the update of Thunderbolt Jellybean 4.2.1 firmware in your Galaxy S3 smartphone.

Download and install - Update Jellyblast 4.1.1 Custom ROM Firmware for Galaxy ACE S5830i

4.1.1 

7 1 2 4 5 3 6 
Procedure to Update Galaxy S 5830i with Jellyblast 4.1.1 Custom ROM Firmware:
  • Download the Jellyblast custom ROM firmware package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable and place the zip file in the device. Ensure that it’s not placed deep into the sub folders.
  • Disconnect the device and turn Off the device so that it can be entered in the recovery mode.
  • The recovery mode in the Galaxy ACE S5830i can be entered by Holding Menu Button and then Power ON the device. If the device turns ON in the normal mode then you need to try again to enter into the recovery mode. You can also enter the device in the recovery mode from the “ROM Manager” app which you can download from the Google PLAY Store.
  • In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose Jellyblast 4.1.1 Custom ROM Firmware which you have placed in your device.
  • Once the zip file is selected, it will take around 3 -4 minutes for applying the update. As soon as the update is applied, select “go back” and “reboot system now” for rebooting the device in the normal mode.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do let us know in the comments section below just in case if you face any issues as we will be more than happy to help you out. Congratulations, you have now successfully updated your Galaxy ACE S5830i device with the latest firmware update of Jellybean 4.1.1.

Root Galaxy Nexus I9250 on Jellybean 4.2 Firmware

Google 
Irrespective of Whenever & Wherever, you can now take out your Galaxy Nexus powered with the freshly brewed Jellybean 4.2 firmware update for rooting the same as very soon a fresh new wave of custom ROM firmwares will be knocking the doors of various developer websites so that you can make the most of your Android. The best part is soon after Google released the Jellybean 4.2 source code, it made its way to AOSP. Please note that you will have to make sure that you follow all the below mentioned express pre requisites so as to smoothly apply this firmware update.
Note: This workaround will only work on the Nexus I9250 Unlocked GSM model which is on the Stock Jellybean 4.2 firmware. Rooting will void the warranty, the only way with which the warranty can be reclaimed is by re applying the Official / Stock Firmware of Jellybean 4.2 in your Galaxy Nexus by following the steps mentioned in the corresponding link.
Express Pre Requisites:
  • It’s mandatory that you backup all your data present in your device with the help of below mentioned steps as there is a probability that the data in your device might get erased or deleted in the process of rooting.
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names
  • From the path “Settings > Applications > Development > USB debugging”, enable the USB Debugging, ensure that the USB debugging option is ticked. Also, make sure that the minimum charge left in your device is minimum of 40% so as to make sure that your Galaxy Nexus doesn’t give up in the middle of rooting process.
Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.
So assuming that you are done with the above mentioned steps, you can now head over to the next page where we have summed up a detailed tutorial on how to root your Galaxy Nexus device.
Procedure to Update Galaxy Nexus I9250 on Latest Stock Jellybean 4.2 Firmware:
  • Now, just in case if your computer is installed with the ADB, keep your phone connected, open command prompt to enter the command as,
ADB Devices (it will list the connected devices),
ADB Reboot recovery (this command will reboot the device in the recovery mode automatically)
  • Just in case if you haven’t installed the SDK in your computer, disconnect the device from computer and turn off your Galaxy Nexus so that it can be entered in the recovery mode. Now, keep pressing the Volume Up + Volume Down rocker keys and continuing pressing these both rocker keys, press and hold the power button to enter the device in the boot loader mode with a green robot. Now, keep pressing the Volume Up key till you see the “Recovery Mode” message at the top most part of the screen and then press the Power button to confirm the same.
  • Now, select “install zip from SD Card” to find for all the zip files present in your Galaxy Nexus device, select the Clock Work Mod recovery zip package followed by the Superuser package files which you have placed these files in your device.
  • Once the zip packages are selected, you now will have to wait for the same to process the same. It will take round about 4 -5 minutes for applying the same.
  • To check on whether the firmware is rooted or not, you will have to check the same from the application called “Root Checker”. Download the Root Checker app from the Google PLAY Store and check whether your device is rooted or not.
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same. So there you go, you have now successfully learnt on how you can root your device with the help of above mentioned guide.

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | belt buckles
Design Downloaded from Free Blogger Templates | Free Website Templates